Final approval of eHN Semantic Subgroup s recommendations by the eHN
Final approval of eHN Semantic Subgroup Sample Clauses
Related to Final approval of eHN Semantic Subgroup
Final Approval After Acceptance, Engineer shall perform any required modifications, changes, alterations, corrections, redesigns, and additional work necessary to receive Final Approval by the County. "Final Approval" in this sense shall mean formal recognition that the Engineering Services have been fully carried out.
State Approval of Replacement Personnel The Engineer may not replace the project manager or key personnel without prior consent of the State. The State must be satisfied that the new project manager or other key personnel is qualified to provide the authorized services. If the State determines that the new project manager or key personnel is not acceptable, the Engineer may not use that person in that capacity and shall replace him or her with one satisfactory to the State within forty-five (45) days.
MOTION FOR FINAL APPROVAL Not later than 16 court days before the calendared Final Approval Hearing, Plaintiff will file in Court, a motion for final approval of the Settlement that includes a request for approval of the PAGA settlement under Labor Code section 2699, subd. (l), a Proposed Final Approval Order and a proposed Judgment (collectively “Motion for Final Approval”). Plaintiff shall provide drafts of these documents to Defense Counsel not later than seven days prior to filing the Motion for Final Approval. Class Counsel and Defense Counsel will expeditiously meet and confer in person or by telephone, and in good faith, to resolve any disagreements concerning the Motion for Final Approval.
Final Approval Hearing “Final Approval Hearing” shall mean the hearing at which the Court will consider and finally decide whether to enter the Final Judgment.
Waiver of Notice; Approval of Meeting; Approval of Minutes The transactions of any meeting of Limited Partners, however called and noticed, and whenever held, shall be as valid as if it had occurred at a meeting duly held after regular call and notice, if a quorum is present either in person or by proxy. Attendance of a Limited Partner at a meeting shall constitute a waiver of notice of the meeting, except when the Limited Partner attends the meeting for the express purpose of objecting, at the beginning of the meeting, to the transaction of any business because the meeting is not lawfully called or convened; and except that attendance at a meeting is not a waiver of any right to disapprove the consideration of matters required to be included in the notice of the meeting, but not so included, if the disapproval is expressly made at the meeting.
Required Governmental Approvals All governmental authorizations, consents and approvals necessary for the valid consummation of the transactions contemplated hereby shall have been obtained and shall be in full force and effect. All applicable governmental pre-acquisition filing, information furnishing and waiting period requirements shall have been met or such compliance shall have been waived by the governmental authority having authority to grant such waivers.
Regulatory Approvals; No Defaults (a) No consents or approvals of, or waivers by, or filings or registrations with, any Governmental Authority or with any third party are required to be made or obtained by NBT or any of its Subsidiaries in connection with the execution, delivery or performance by NBT or NBT Bank of this Agreement or to consummate the transactions contemplated hereby, except for filings of applications, notices or waiver requests, and consents, approvals or waivers described in Section 4.08(b). As of the date hereof, NBT has no Knowledge of any reason why the approvals set forth above and referred to in Section 6.01(a) will not be received in a timely manner. (b) Subject to the receipt of all consents, approvals, waivers or non-objections of a Governmental Authority required to consummate the transactions contemplated by this Agreement, including, without limitation, (1) approvals, waivers or non-objections of each of the FRB and the OCC, as required (“Regulatory Approvals”), (2) the required filings under federal and state securities laws, (3) the declaration of effectiveness of the Merger Registration Statement by the SEC, and (4) approval of the listing of NBT Stock to be issued in connection with the Merger on NASDAQ, the execution, delivery and performance of this Agreement and the consummation of the transactions contemplated hereby (including, without limitation, the Merger) by NBT and NBT Bank do not and will not (i) constitute a breach or violation of, or a default under, result in a right of termination, or the acceleration of any right or obligation under, any law, rule or regulation or any judgment, decree, order, permit, license, credit agreement, indenture, loan, note, bond, mortgage, reciprocal easement agreement, lease, instrument, concession, franchise or other agreement of NBT or of any of its Subsidiaries or to which NBT or any of its Subsidiaries, properties or assets is subject or bound, (ii) constitute a breach or violation of, or a default under, the Restated Certificate of Incorporation, as amended, and Amended and Restated Bylaws of NBT or other organizational documents of NBT or NBT Bank, or (iii) require the consent or approval of any third party or Governmental Authority under any such law, rule, regulation, judgment, decree, order, permit, license, credit agreement, indenture, loan, note, bond, mortgage, reciprocal easement agreement, lease, instrument, concession, franchise or other agreement, except, in the case of clauses (i) and (iii), for such violations, conflicts, breaches or defaults which, either individually or in the aggregate, would not reasonably be expected to have a Material Adverse Effect on NBT or NBT Bank. (c) As of the date of this Agreement, NBT has no Knowledge of any reasons relating to NBT or NBT Bank (including, without limitation, compliance with the CRA or the USA PATRIOT Act) why any of the Regulatory Approvals shall not be received from the applicable Governmental Authorities having jurisdiction over the transactions contemplated by this Agreement.
Cost Responsibility for Interconnection Facilities and Distribution Upgrades 4.1 Interconnection Facilities 4.2 Distribution Upgrades
PRELIMINARY APPROVAL OF SETTLEMENT Promptly upon execution of this Stipulation, Lead Plaintiffs will move for preliminary approval of the Settlement, certification of the Settlement Class for settlement purposes only, and the scheduling of a hearing for consideration of final approval of the Settlement, which motion shall be unopposed by Defendants. Concurrently with the motion for preliminary approval, Lead Plaintiffs shall apply to the Court for, and Defendants shall agree to, entry of the Preliminary Approval Order, substantially in the form attached hereto as Exhibit A.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
