Common use of Floor Thickness Clause in Contracts

Floor Thickness. In accordance with local seismic requirements for the equipment (vii) Conduit access to all floors in building (viii) Local exchange carrier cable available (ix) Commercial electrical current (x) Existing building grounding is 5 ohm or less metered (xi) Battery room ventilation in accordance with local requirements (xii) Fire suppression system (xiii) Freight access for a 48' trailer off loading equipment. Lucent Technologies Proprietary 3.2 ADDITIONAL ITEMS TO BE PROVIDED BY CUSTOMER: (a) Customer will also be responsible for furnishing the items described in this Section 3.2 as required by the conditions of the particular installation or other on-site Service at no cost to Seller and such items are not included in Seller's price for the Services. Seller shall have the right to invoice Customer for any costs or expenses incurred by Seller as a result of Customer's failure to provide any of these items described in this Section 3.2 and all such invoices shall be paid by Customer in accordance with this Agreement. (i) Access to Building and Work Site Customer shall provide employees of Seller and its subcontractors free access to premises and facilities at all hours during the scheduled Service or at such other times as are requested by Seller. Customer shall obtain for Seller's employees and its subcontractors' employees any identification and clearance credentials which are necessary to enable Seller and its subcontractors to have access to the work site. (ii) Site Coordination At Seller's request Customer shall coordinate with Customer's subcontractors, property managers, Regional Bell Operating Company, Local Exchange Carrier and any other parties and tenants having rights to the work site or whose participation is necessary in order for Seller to perform the applicable Services. (iii) Environmental Conditions Prior to the Services start date, Customer shall insure that the premises will be dry and free from dust and Hazardous Materials, including but not limited to asbestos, and that the premises are in such condition as not to be injurious to Seller's or its subcontractors' employees or to the Products and Licensed Materials to be installed. Prior to Services start date and during the performance of the Services, Customer shall, if requested by Seller, provide Seller with sufficient data to assist Seller and its subcontractors in evaluating the environmental conditions at the work site (including without limitation, the presence of Hazardous Materials). The price quoted by Seller for Services does not include the cost of removal or disposal of the Hazardous Materials from the work site. Customer is responsible for the removal and disposal in accordance with applicable laws, rules and regulation of the Hazardous Materials, including but not limited to asbestos, prior to commencement of Services. (iv) Sensitive Equipment Prior to the Services start date, Customer shall inform Seller of the presence of any sensitive equipment at the work site (e.g., equipment sensitive to static electricity or light). (v) Repairs to Buildings Prior to the Services start date, Customer shall make such alterations and repairs to the work site as are necessary for proper installation of Products and Licensed Materials. (vi) Building Readiness Prior to the Services start date, Customer shall provide extraordinary hauling and hoisting services such as, rigging or crane services, if Lucent Technologies Proprietary

Floor Thickness. In accordance with local seismic requirements for the equipment (vii) Conduit access to all floors in building (viii) Local exchange carrier cable available (ix) Commercial electrical current (x) Existing building grounding is 5 ohm or less metered (xi) Battery room ventilation in accordance with local requirements (xii) Fire suppression system (xiii) Freight access for a 48' trailer off loading equipment. Lucent Technologies ProprietaryProprietary 25 30 3.2 ADDITIONAL ITEMS TO BE PROVIDED BY CUSTOMER: (a) Customer will also be responsible for furnishing the items described in this Section 3.2 as required by the conditions of the particular installation or other on-site Service at no cost to Seller and such items are not included in Seller's price for the Services. Seller shall have the right to invoice Customer for any costs or expenses incurred by Seller as a result of Customer's failure to provide any of these items described in this Section 3.2 and all such invoices shall be paid by Customer in accordance with this Agreement. (i) Access to Building and Work Site Customer shall provide employees of Seller and its subcontractors free access to premises and facilities at all hours during the scheduled Service or at such other times as are requested by Seller. Customer shall obtain for Seller's employees and its subcontractors' employees any identification and clearance credentials which are necessary to enable Seller and its subcontractors to have access to the work site. (ii) Site Coordination At Seller's request Customer shall coordinate with Customer's subcontractorssub contractors, property managers, Regional Bell Operating Company, Local Exchange Carrier and any other parties and tenants having rights to the work site or whose participation is necessary in order for Seller to perform the applicable Services. (iii) Environmental Conditions Prior to the Services start date, Customer shall insure that the premises will be dry and free from dust and Hazardous Materials, including but not limited to asbestos, and that the premises are in such condition as not to be injurious to Seller's or its subcontractors' employees or to the Products and Licensed Materials to be installed. Prior to Services start date and during the performance of the Services, Customer shall, if requested by Seller, provide Seller with sufficient data to assist Seller and its subcontractors in evaluating the environmental conditions at the work site (including without limitation, the presence of Hazardous Materials). The price quoted by Seller for Services does not include the cost of removal or disposal of the Hazardous Materials from the work site. Customer is responsible for the removal and disposal in accordance with applicable laws, rules and regulation of the Hazardous Materials, including but not limited to asbestos, prior to commencement of Services. (iv) Sensitive Equipment Prior to the Services start date, Customer shall inform Seller of the presence of any sensitive equipment at the work site (e.g., equipment sensitive to static electricity or light). (v) Repairs to Buildings Prior to the Services start date, Customer shall make such alterations and repairs to the work site as are necessary for proper installation of Products and Licensed Materials.. Lucent Technologies Proprietary 26 31 (vi) Building Readiness Prior to the Services start date, Customer shall provide extraordinary hauling and hoisting services such as, rigging or crane services, if applicable, and shall arrange for traffic control, if necessary for the delivery of Products. (vii) Openings in Buildings - Customer shall furnish suitable openings in buildings, including, without limitation, elevators and windows as needed to allow Products to be placed in position, and shall provide necessary openings and ducts for cable and conductors in floors and walls as designated on engineering drawings furnished by Seller. Customer shall fireproof (with steel covers and as otherwise required by applicable laws, rules, regulations, and codes) all unopened paths throughout such buildings. (viii) Surveys Prior to the Services start date, Customer shall provide to Seller (and, if requested by Seller, to Seller's subcontractors) surveys (describing the physical characteristics, legal limitations, and utility locations for the work site) and a legal description of the site. (ix) Electrical Current, Heat, Light, and Water Customer shall, in amounts no less than that ordinarily furnished for similar purposes in a working office, provide electric power, run all leads to Seller's power board; provide temperature control and general illumination (regular and emergency) in rooms in which services are to be performed or Products stored, provide exit lights; and provide water and other necessary utilities for the proper execution of Services. (x) Building Evacuation Prior to the Services start date, Customer shall provide building evacuation plans in case of a fire or other emergency. (xi) Material Furnished by Customer Unless expressly stated to the contrary, Seller's prices do not include costs for any Customer furnished material nor do they include any Seller charges for engineering, installation, modification, or repair Services to Customer furnished material. New or used material furnished by Customer shall be in such condition that it requires no repair and no adjustment or test effort in excess of that normal for new equipment. Customer assumes all responsibility for the proper functioning of such material. Customer shall also provide the necessary technical assistance and information for Seller to properly install such material. (xii) Floor Space and Storage Facilities Customer shall provide, for the duration of Services, suitable and easily accessible floor space and storage facilities to permit storing of Products and other material, tools and other property of Seller and its subcontractors in close proximity to where they will be used. Where the Services are to be performed outside of a building or in a building under construction, Customer shall, in addition to the above requirements, permit or secure any necessary Lucent Technologies ProprietaryProprietary 27 32 permission for Seller and its subcontractors to maintain at the work site, storage facilities for Products, material, tools, and equipment needed to complete the Services. As appropriate Customer shall provide Seller's and its subcontractors' personnel access to toilet facilities. (xiii) Easements, Permits, and Rights of Way Customer shall secure prior to the Services start date and shall maintain for the duration of the Services all rights-of-way, easements, licenses, and permits and such other rights and approvals as are necessary to enable Seller to perform the Services including, without limitation, all construction and building permits for work to be performed at the work site and other areas ancillary to the work site such as sidewalks, streets, alleys, and highways. (xiv) Security Service Customer shall provide such levels of security as are necessary to prevent admission of unauthorized persons to building and other areas where installation Services are performed and to prevent unauthorized removal of the Products and other materials. Seller will inform Customer as to which storage facilities at the work site Seller will keep locked. Such storage facilities will remain closed to Customer's building surveillance. (xv) Access to Existing Equipment Customer shall permit Seller reasonable use of such portions of the existing equipment as are necessary for the proper completion of such tests as require coordination with existing equipment. Such use shall not interfere with the Customer's normal maintenance of equipment. (xvi) Grounds Customer shall provide access to suitable and isolated building ground as required for Seller's standard grounding of equipment. Where installation is performed outside or in a building under construction, Customer shall also furnish lightning protection ground. (xvii) Requirements for Customer Designed Circuits Customer shall furnish information covering the proper test and readjust requirements for apparatus and shall furnish requirements for circuit performance associated with circuits designed by Customer or standard circuits modified by Customer's drawings such as alarm and environmental circuits. (xviii) Cross-Connecting Main Distributing Frames and Installing Heat Coils Customer shall install such cross-connections and heat coils as are necessary in connection with the Services. (xix) Clearing Equipment for Modifications Customer shall remove cross-connections, transfer service on trunks and sundry working equipment, and make other arrangements required to permit Seller to modify existing equipment. Lucent Technologies Proprietary 28 33 (b) In the event the joint site survey conducted by the parties pursuant to Section 3.3.2 (a) determines that the necessary requirements are not met at the commencement of the installation of the Products and the Customer needs to arrange for alterations and/or repairs, the order will be placed on hold until such time as requirements are met. During such interval, Seller reserves the right to determine any schedule and price impacts, to treat such product as Bill xxx Hold, or to cancel such order. Customer shall be responsible for and agrees to pay the applicable cancellation fee if such order is canceled by Seller.