Inventory Management The Subrecipient must submit an annual statement identifying the status of all equipment and non-real property items purchased with ESG funds by the contract termination date. The status report should inventory all equipment and non-real properties purchased with ESG funds and state the condition of the equipment and its location.
Maintenance of the Primary Insurance Policies; Collections Thereunder (a) The Master Servicer shall not take, or permit any Subservicer to take, any action which would result in non-coverage under any applicable Primary Insurance Policy of any loss which, but for the actions of the Master Servicer or Subservicer, would have been covered thereunder. To the extent coverage is available, the Master Servicer shall keep or cause to be kept in full force and effect each such Primary Insurance Policy until the principal balance of the related Mortgage Loan secured by a Mortgaged Property is reduced to 80% or less of the Appraised Value in the case of such a Mortgage Loan having a Loan-to-Value Ratio at origination in excess of 80%, provided that such Primary Insurance Policy was in place as of the Cut-off Date and the Company had knowledge of such Primary Insurance Policy. The Master Servicer shall be entitled to cancel or permit the discontinuation of any Primary Insurance Policy as to any Mortgage Loan, if the Stated Principal Balance of the Mortgage Loan is reduced below an amount equal to 80% of the appraised value of the related Mortgaged Property as determined in any appraisal thereof after the Closing Date, or if the Loan-to-Value Ratio is reduced below 80% as a result of principal payments on the Mortgage Loan after the Closing Date. In the event that the Company gains knowledge that as of the Closing Date, a Mortgage Loan had a Loan-to-Value Ratio at origination in excess of 80% and is not the subject of a Primary Insurance Policy (and was not included in any exception to the representation in Section 2.03(b)(iv)) and that such Mortgage Loan has a current Loan-to-Value Ratio in excess of 80% then the Master Servicer shall use its reasonable efforts to obtain and maintain a Primary Insurance Policy to the extent that such a policy is obtainable at a reasonable price. The Master Servicer shall not cancel or refuse to renew any such Primary Insurance Policy applicable to a Nonsubserviced Mortgage Loan, or consent to any Subservicer canceling or refusing to renew any such Primary Insurance Policy applicable to a Mortgage Loan subserviced by it, that is in effect at the date of the initial issuance of the Certificates and is required to be kept in force hereunder unless the replacement Primary Insurance Policy for such canceled or non-renewed policy is maintained with an insurer whose claims-paying ability is acceptable to each Rating Agency for mortgage pass-through certificates having a rating equal to or better than the lower of the then-current rating or the rating assigned to the Certificates as of the Closing Date by such Rating Agency.
(b) In connection with its activities as administrator and servicer of the Mortgage Loans, the Master Servicer agrees to present or to cause the related Subservicer to present, on behalf of the Master Servicer, the Subservicer, if any, the Trustee and Certificateholders, claims to the related Insurer under any Primary Insurance Policies, in a timely manner in accordance with such policies, and, in this regard, to take or cause to be taken such reasonable action as shall be necessary to permit recovery under any Primary Insurance Policies respecting defaulted Mortgage Loans. Pursuant to Section 3.07, any Insurance Proceeds collected by or remitted to the Master Servicer under any Primary Insurance Policies shall be deposited in the Custodial Account, subject to withdrawal pursuant to Section 3.10.
Contractor Sales Reporting Vendor Management Fee Contractor Reports Master Contract Sales Reporting. Contractor shall report total Master Contract sales quarterly to Enterprise Services, as set forth below. Master Contract Sales Reporting System. Contractor shall report quarterly Master Contract sales in Enterprise Services’ Master Contract Sales Reporting System. Enterprise Services will provide Contractor with a login password and a vendor number. The password and vendor number will be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. Data. Each sales report must identify every authorized Purchaser by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized purchasers specified herein during the term of the Master Contract. If there are no Master Contract sales during the reporting period, Contractor must report zero sales. Due dates for Master Contract Sales Reporting. Quarterly Master Contract Sales Reports must be submitted electronically by the following deadlines for all sales invoiced during the applicable calendar quarter: March 31: April 30 June 30: July 31 September 30: October 31 December 31: January 31 Vendor Management Fee. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 1.50 percent on the purchase price for all Master Contract sales (the purchase price is the total invoice price less applicable sales tax). The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows: Amount owed to Enterprise Services = Total Master Contract sales invoiced (not including sales tax) x .0150. The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services. Enterprise Services will invoice Contractor quarterly based on Master Contract sales reported by Contractor. Contractors are not to remit payment until they receive an invoice from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference this Master Contract number, work request number (if applicable), the year and quarter for which the VMF is being remitted, and the Contractor’s name as set forth in this Master Contract, if not already included on the face of the check. Failure to accurately report total net sales, to submit a timely usage report, or remit timely payment of the VMF, may be cause for Master Contract termination or the exercise of other remedies provided by law. Without limiting any other available remedies, the Parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sums. The sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less. Enterprise Services reserves the right, upon thirty (30) days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Master Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing. Annual Master Contract Sales Report. Upon request, Contractor shall provide to Enterprise Services a detailed annual Master Contract sales report. Such report shall include, at a minimum: Product description, part number or other Product identifier, per unit quantities sold, and Master Contract price. This report must be provided in an electronic format that can be read by compatible with MS Excel. Small Business Inclusion. Upon Request by Enterprise Services, Contractor shall provide, within thirty (30) days, an Affidavit of Amounts Paid. Such Affidavit of Amounts Paid either shall state, if applicable, that Contractor still maintains its MWBE certification or state that its subcontractor(s) still maintain(s) its/their MWBE certification(s) and specify the amounts paid to each certified MWBE subcontractor under this Master Contract. Contractor shall maintain records supporting the Affidavit of Amounts Paid in accordance with this Master Contract’s records retention requirements.
Billing and Collection Customers BellSouth currently has in effect numerous billing and collection agreements with various interexchange carriers and billing clearing houses and as such these billing and collection customers (“B&C Customers”) query BellSouth’s LIDB to determine whether to accept various billing options from End Users. Until such time as BellSouth implements in its LIDB and its supporting systems the means to differentiate Lightyear’s data from BellSouth’s data, the following shall apply:
(1) Lightyear will accept responsibility for telecommunications services billed by BellSouth for its B&C Customers for Lightyear’s End User accounts which are resident in LIDB pursuant to this Agreement. Lightyear authorizes BellSouth to place such charges on Lightyear’s xxxx from BellSouth and shall pay all such charges, including, but are not limited to, collect and third number calls.
(2) Charges for such services shall appear on a separate BellSouth xxxx xxxx identified with the name of the B&C Customers for which BellSouth is billing the charge.
(3) Lightyear shall have the responsibility to render a billing statement to its End Users for these charges, but Lightyear shall pay BellSouth for the charges billed regardless of whether Lightyear collects from Lightyear’s End Users.
(4) BellSouth shall have no obligation to become involved in any disputes between Lightyear and B&C Customers. BellSouth will not issue adjustments for charges billed on behalf of any B&C Customer to Lightyear. It shall be the responsibility of Lightyear and the B&C Customers to negotiate and arrange for any appropriate adjustments.
Billing and Collection On behalf of and for the account of ---------------------- Provider, Service Company shall establish and maintain credit and billing and collection policies and procedures, and shall exercise reasonable efforts to xxxx and collect in a timely manner all professional and other fees for all billable Dental Care provided by Dental Care Professionals, including any such fees paid directly to Provider by Service Company pursuant to the then-current Membership Agreement (or similar agreement for providing professional services to dental plans) between Service Company and Provider. Service Company shall advise and consult with Provider regarding the fees for Dental Care provided by Provider (including any related discounting policy); it being understood, however, that Provider's consent shall be necessary to establish the fees (subject to (S)3.2(d), above) to be charged for Dental Care. In connection with the billing and collection services to be provided hereunder, Provider hereby grants to Service Company, throughout the Term (and thereafter as provided in (S)8.3), an exclusive special power of attorney and appoints Service Company as Provider's exclusive true and lawful agent and attorney-in-fact, and Service Company hereby accepts such special power of attorney and appointment, for the following purposes:
(a) To xxxx Provider's patients, in either Provider's or Service Company's name (as Service Company deems appropriate) and on Provider's behalf, for all billable Dental Care provided by or on behalf of Provider to patients.
(b) To xxxx, in either Provider's or Service Company's name (as Service Company deems appropriate) and on Provider's behalf, all claims for reimbursement or indemnification from insurance companies and plans, all state or federally funded dental benefit plans, and all other third party payors or fiscal intermediaries for all covered billable Dental Care provided by or on behalf of Provider to patients.
(c) To collect and receive, in either Provider's or Service Company's name (as Service Company deems appropriate) and on Provider's behalf, all accounts receivable generated by such xxxxxxxx and claims for reimbursement, to administer such accounts including, but not limited to, extending the time of payment of any such accounts for cash, credit or otherwise; discharging or releasing the obligors of any such accounts; suing, assigning or selling at a discount such accounts to collection agencies; or taking other measures to require the payment of any such accounts; provided, however, that extraordinary collection measures, such as filing lawsuits, discharging or releasing obligors shall not be undertaken without Provider Consent.
(d) To deposit all amounts collected into the Provider Account. Provider shall transfer and deliver to Service Company all funds received by Provider from patients or third party payors for Dental Care. Upon receipt by Service Company of any funds from patients or third party payors or from Provider for Dental Care pursuant to this agreement, Service Company shall promptly deposit the same into the Provider Account.
(e) To take possession of, endorse in the name of Provider, and deposit into the Provider Account any notes, checks, money orders, insurance payments, and any other instruments received in payment of accounts receivable for Dental Care.
(f) To sign checks, drafts, bank notes or other instruments on behalf of Provider, and to make withdrawals from the Provider Account for payments specified in this agreement and otherwise as agreed upon from time to time by the Parties. Upon request of Service Company, Provider shall execute and deliver to the financial institution at which the Provider Account is maintained such additional documents or instruments as Service Company may reasonably request to evidence or effect the special power of attorney granted to Service Company by Provider pursuant to this section and (S)4.12. The special power of attorney granted herein is coupled with an interest and shall be irrevocable except with Service Company's written consent. The irrevocable power of attorney shall expire when this agreement has been terminated, all accounts receivable purchased by Service Company pursuant to (S)7.7, if any, have been collected, and all amounts due to Service Company as described in Article VII have been paid.
Recipient’s Representative; Addresses 5.01. The Recipient’s Representative referred to in Section 7.02 of the Standard Conditions is the Minister of Development and International Cooperation.
5.02. The Recipient’s Address referred to in Section 7.01 of the Standard Conditions is: Ministry of Development and International Cooperation Place Xxx Xxxxxxx 1069 Tunis Republic of Tunis Cable: Telex: Facsimile: MCIIE 18060 212-71-351666/ 000-00-000000
5.03. The World Bank’s Address referred to in Section 7.01 of the Standard Conditions is: International Bank for Reconstruction and Development 0000 X Xxxxxx, X.X. Xxxxxxxxxx, X.X. 00000 Xxxxxx Xxxxxx of America Cable: Telex: Facsimile: INTBAFRAD Xxxxxxxxxx, X.X. 000000 (MCI) or 64145 (MCI) 0-000-000-0000 AGREED at District of Columbia, United States of America, as of the day and year first above written. REPUBLIC OF TUNISIA By /s/Xxxxxxx Xxxxx Jouini Authorized Representative INTERNATIONAL BANK FOR RECONSTRUCTION AND DEVELOPMENT acting as an Implementing Agency of the Global Environment Facility By /s/ Xxxxxxxx Xxxxxx Authorized Representative The objective of the Project is to improve living conditions for rural communities in the Project Area inter alia by fostering increased access to basic infrastructure and services, sustainable increase of income, improved natural resource management practices and promotion of an integrated approach to community-based development among various stakeholders. The Project consists of the following parts: Part A: Financing for Execution of Investments Selected under the PDP Framework. Carrying out of selected investments encompassing works, equipment, tools, materials, consultants’ services and training, to sustain development activities in the following areas:
(i) Construction and rehabilitation of water harvesting infrastructure, establishment and rehabilitation of public and private irrigation schemes; and construction of drinking water supply systems.
(ii) Construction and rehabilitation of rural feeder roads.
(iii) Development of sustainable agricultural production systems through improved delivery of agricultural extension and advisory services, improvement of pastoral, sylvo-pastoral, and forested areas, dissemination of climate-resilient farming practices, diversification of rural economic activities, and promotion of efficient water and soil conservation practices. Part B: Development and Promotion of Use of Treated Wastewater in Agriculture
1. Carrying out of: (a) a feasibility study aimed at assessing, costing and testing the options to maximize benefits to be derived from the use of treated wastewater produced from the Greater Tunis area and transferred to rural areas; and (b) an assessment of degraded lands susceptible to being improved through the use of treated wastewater for agricultural purposes, and for adapting and mitigating the impact of climate change.
2. Development of pilot schemes to demonstrate the value and benefits to be derived from the use of treated wastewater to preserve and intensify agricultural production systems on degraded lands. Part C: Institutional Strengthening and Sensitization to Environmental Issues and IPA Methodology
1. Strengthening the capacity of institutions involved in implementation of the Project at the national, regional and local levels including RCADs and ADGs through the provision of logistical support, technical advisory services and adequate training programs.
2. Strengthening the CCU’s capacity to manage the Project efficiently including ensuring adequate monitoring and evaluation, and compliance with all safeguard measures related to implementation of the environment and social protection framework.
3. Development and execution of a communication and sensitization action plan aimed at raising awareness on environmental themes and IPA methodology.
Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.
CONTRACTOR CUSTOMER SERVICE REPRESENTATIVE Contractor shall designate a customer service representative (and inform Enterprise Services of the same) who shall be responsible for addressing Purchaser issues pertaining to this Master Contract.
Cloud Computing State Risk and Authorization Management Program In accordance with Senate Bill 475, Acts 2021, 87th Leg., R.S., pursuant to Texas Government Code, Section 2054.0593, Contractor acknowledges and agrees that, if providing cloud computing services for System Agency, Contractor must comply with the requirements of the state risk and authorization management program and that System Agency may not enter or renew a contract with Contractor to purchase cloud computing services for the agency that are subject to the state risk and authorization management program unless Contractor demonstrates compliance with program requirements. If providing cloud computing services for System Agency that are subject to the state risk and authorization management program, Contractor certifies it will maintain program compliance and certification throughout the term of the Contract.
Personnel, Office Space, and Facilities of Manager The Manager at its own expense shall furnish or provide and pay the cost of such office space, office equipment, office personnel, and office services as the Manager requires in the performance of its investment advisory and other obligations under this Agreement.
