General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, (1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO; (2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO; (5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same; (6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 108 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 40 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TODistribution Provider;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Distribution Provider would be subject in the engineering, procurement or construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Distribution Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Distribution Provider a schedule for construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TODistribution Provider;
(5) at any time during construction, the Participating TO Distribution Provider shall have the right to gain unrestricted access to the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TODistribution Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Distribution Provider for claims arising from the Interconnection Customer's construction of the Participating TODistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Distribution Provider's Interconnection Facilities to the Distribution Provider and shall transfer Operational Control of Stand Alone Network Upgrades to the ISO;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Distribution Provider’s Interconnection Facilities and Stand-Alone Network Upgrades to Distribution Provider;
(10) Distribution Provider shall approve and accept for operation and maintenance Distribution Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Distribution Provider “as-built” drawings, information, and any other documents that are reasonably required by Distribution Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Distribution Provider.
Appears in 26 contracts
Samples: Generator Interconnection Agreement, Generator Interconnection Agreement, Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner in accordance with Appendix B;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for Transmission Owner to execute the responsibilities enumerated to Transmission Owner under Article 5.
Appears in 24 contracts
Samples: Generator Interconnection Agreement (Gia), Generator Interconnection Agreement (Gia), Generator Interconnection Agreement (Gia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,, or assumes responsibility for any stand-alone task, such as telecommunications, environmental, or real-estate related work:
(1) within six (6) months of the execution of this LGIA, or at a later date agreed to by the Parties, the Interconnection Customer will submit to the CAISO and the Participating TO a milestone schedule for the design, procurement, and construction of the Stand Alone Network Upgrades, or any stand-alone task assumed by the Interconnection Customer. The milestone schedule will be required to support the Interconnection Customer’s Commercial Operation Date, and any Appendix B Milestones will be amended to include the milestone schedule for the Stand Alone Network Upgrades;
(2) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(23) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(34) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(45) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(56) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(67) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) 8) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 22 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
Appears in 22 contracts
Samples: Generator Interconnection Agreement, Generator Interconnection Agreement, Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Connecting Transmission Owner’s
Appears in 20 contracts
Samples: Service Agreement, Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
5.2.9 Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 16 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection Customer’s Developer's engineering, procurement and construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Transmission Owner and Participating TO NYISO for claims arising from the Interconnection CustomerDeveloper's construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 14 contracts
Samples: Service Agreement, Large Generator Interconnection Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 12 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
5.2.9 Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 5.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.
Appears in 12 contracts
Samples: Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner; Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner; Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 11 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TONational Grid;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO National Grid would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO National Grid shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owners and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owners or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owners shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TONational Grid, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owners and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 10 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior Prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 9 contracts
Samples: Generator Interconnection Agreement, Settlement Agreement, Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;remedy
(7) the Interconnection Customer Developer shall indemnify the CAISO Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 9 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The the Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) the Interconnection Customer shall transfer control of the Participating TO's Interconnection Facilities to the Participating TO and shall transfer Operational Control of Stand Alone Network Upgrades to the CAISO;
(9) unless the Parties otherwise agree, the Interconnection Customer shall transfer ownership of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades to the Participating TO. As soon as reasonably practicable, but within twelve months after completion of the construction of the Participating TO’s Interconnection Facilities and Stand Alone Network Upgrades, the Interconnection Customer shall provide an invoice of the final cost of the construction of the Participating TO’s Interconnection Facilities and Stand Alone Network Upgrades to the Participating TO, which invoice shall set forth such costs in sufficient detail to enable the Participating TO to reflect the proper costs of such facilities in its transmission rate base and to identify the investment upon which refunds will be provided;
(10) the Participating TO shall accept for operation and maintenance the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) the Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of the “Option to Build” conditions set forth in Appendix C. Interconnection Customer shall deliver to the Participating TO “as-built” drawings, information, and any other documents that are reasonably required by the Participating TO to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by the Participating TO.
Appears in 9 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Transmission Owner and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1NYISO for
Appears in 8 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner's Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
Appears in 8 contracts
Samples: Generator Interconnection Agreement, Generator Interconnection Agreement, Power Purchase Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Connecting Transmission Owner’s
Appears in 8 contracts
Samples: Standard Large Generator Interconnection Agreement, Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) Developer agrees to comply with all applicable provisions of Section 220 of the Participating TO New York Labor Law (“Section 220”), as it may be amended from time to time. Pursuant to the requirements of Section 220, Developer agrees that, for work performed on existing Connecting Transmission Owner facilities (i.e., “public work”):
(a) Each laborer, xxxxxxx or mechanic shall reviewbe paid no less than the prevailing wages as defined in Section 220,
(b) The filing of payrolls shall be made in a manner consistent with subdivision three-a (3(a)) of Section 220; this is a condition precedent to payment of any sums due and owing to any person for work done upon the project, and
(c) No laborer, worker, or mechanic shall be permitted or required to work more than eight hours in any one calendar day or more than five days in any one week except in cases of extraordinary emergency including fire, flood, or danger to life or property.1
(4) Connecting Transmission Owner shall review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(45) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(56) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(67) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 8) Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 7 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) Developer agrees to comply with all applicable provisions of Section 220 of the Participating TO New York Labor Law (“Section 220”), as it may be amended from time to time. Pursuant to the requirements of Section 220, Developer agrees that, for work performed on existing Connecting Transmission Owner facilities (i.e., “public work”):
(a) Each laborer, xxxxxxx or mechanic shall reviewbe paid no less than the prevailing wages as defined in Section 220,
(b) The filing of payrolls shall be made in a manner consistent with subdivision three-a (3(a)) of Section 220; this is a condition precedent to payment of any sums due and owing to any person for work done upon the project, and
(c) No laborer, worker, or mechanic shall be permitted or required to work more than eight hours in any one calendar day or more than five days in any one week except in cases of extraordinary emergency including fire, flood, or danger to life or property.1
(4) Connecting Transmission Owner shall review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(45) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(56) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(67) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;System Upgrade Facilities; 1 Developer reserves its rights set forth in Section 220 to obtain dispensation permitting laborers, workers and mechanics to work additional hours or days per week.
(7) the Interconnection Customer 8) Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 7 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 6 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner in accordance with Appendix B;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for Transmission Owner to execute the responsibilities enumerated to Transmission Owner under Article 5.2. Transmission Owner shall invoice Interconnection Customer for this total amount to be divided on a monthly basis pursuant to Article 12.
(13) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, and the Transmission Owner has elected to fund the costs of Network Upgrades pursuant to Article 11.3, then prior to Interconnection Customer incurring any construction costs relating to the Option to Build and by the date specified in Appendix B, Interconnection Customer shall invoice the Transmission Owner for the estimated amount to be expended by the Interconnection Customer to construct any Stand Alone Network Upgrades for which the Interconnection Customer has exercised its Option to Build in accordance with Appendix B. The Transmission Owner shall be required to reimburse Interconnection Customer for the full amount of such invoiced costs by the date specified in Appendix B, which shall be prior to the date by which Interconnection Customer must make any construction payment for such Stand Alone Network Upgrades. After completion of the construction of Stand Alone Network Upgrades by the Interconnection Customer and by the date specified in Appendix B for the Interconnection Customer to transfer such Stand Alone Network Upgrades to the Transmission Owner, Interconnection Customer shall provide an invoice of the final cost of the construction of Stand Alone Upgrades and shall set forth such costs in sufficient detail to enable the Transmission Owner to compare the actual costs with the estimates and to ascertain deviations, if any, from the cost estimates. In the event that the actual costs exceed the estimated costs previously invoiced by Interconnection Customer and paid by Transmission Owner, Transmission Owner shall pay to Interconnection Customer the difference between the amount previously paid and the actual costs within thirty (30) Calendar Days after receipt of a final construction invoice from Interconnection Customer. In the event that the actual costs are less than the estimated costs previously invoiced by Interconnection Customer and paid by Transmission Owner, Interconnection Customer shall refund, with interest (calculated in accordance with 18 C.F.R. Section 35.19a(a)(2)(iii), to Transmission Owner any amount by which the actual payment by Transmission Owner for estimated costs exceeds the actual costs of construction within thirty (30) Calendar Days of the issuance of such final construction invoice. Following the transfer of the Stand Alone Network Upgrades from the Interconnection Customer to the Transmission Owner, the Interconnection Customer shall make payments for such facilities to the Transmission Owner pursuant to an agreement between and among the Parties.
Appears in 6 contracts
Samples: Generator Interconnection Agreement, Generator Interconnection Agreement, Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections inspections, at Interconnection Customer’s cost, of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand- Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents in compliance with Transmission Provider’s standards that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 6 contracts
Samples: Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article
18.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand- Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 18.15.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as- built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 5 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO ISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO ISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO ISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 5 contracts
Samples: Standard Large Generator Interconnection Agreement, Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOInterconnecting Transmission Owner;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Interconnecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Interconnecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Interconnecting Transmission Owner a schedule for construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOInterconnecting Transmission Owner;
(5) at any time during construction, the Participating TO Interconnecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOInterconnecting Transmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Interconnecting Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 (Indemnity);
(8) the Interconnection Customer shall transfer control of Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Interconnecting Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Interconnecting Transmission Owner;
(10) Interconnecting Transmission Owner shall approve and accept for operation and maintenance the Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Interconnecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by Interconnecting Transmission Owner to assure that the Interconnection Facilities and Stand Alone Network Upgrades are built to the standards and specifications required by Interconnecting Transmission Owner.
Appears in 5 contracts
Samples: Service Agreement, Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; gain right to At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner; Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner; Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner. If Developer exercises the Option to Build pursuant to Article 5.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for the Connecting Transmission Owner to execute the responsibilities
Appears in 5 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 4 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer System Upgrade Facilities, Developer shall engineer, procure equipment, and construct the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s Transmission Owner; Developer's engineering, procurement and construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Transmission Owner or NYISO; A t any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 4 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Connecting Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
(9) Unless the Interconnection Customer and Connecting Transmission Owner otherwise agree, Interconnection Customer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
(10) Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 4 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner; Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner; Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 4 contracts
Samples: Service Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Service Agreement No. 1702
(8) Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
(9) Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
(10) Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 4 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,Connecting
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 4 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TOconstruction site for the Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) the Interconnection Customer shall transfer control of Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner's Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Provider “as-built” drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 4 contracts
Samples: Generator Interconnection Agreement, Generator Interconnection Agreement, Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the 5.2.1 Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The 5.2.2 Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to the commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the 5.2.7 Interconnection Customer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Connecting Transmission Owner’s Attachment Facilities, Stand Alone System Upgrade Facilities under procedures applicable to Article 18.1 Indemnity;
5.2.8 Interconnection Customer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless Interconnection Customer and procedures applicable Connecting Transmission Owner otherwise agree, Interconnection Customer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2;
5.2.11 Interconnection Customer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner; and
5.2.12 If Interconnection Customer exercises the Option to Build pursuant to Article 18.15.1.3 , Interconnection Customer shall pay the Connecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.
Appears in 4 contracts
Samples: Standard Interconnection Agreement, Standard Interconnection Agreement, Standard Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades,
(1) tThe Interconnection Customer shall commit in the LGIA to a schedule for the completion of, and provide the System Operator evidence of proceeding with: (a) engineering and design of Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, (b) procurement of necessary equipment and ordering of long lead time material, and (c) construction of the Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(2) tThe Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOInterconnecting Transmission Owner;
(23) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Interconnecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(34) the Participating TO Interconnecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(45) prior pPrior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy Interconnecting Transmission Owner any changes to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades reflected in Appendix B (Milestones), and shall promptly respond to requests for information from the Participating TOInterconnecting Transmission Owner;
(56) at aAt any time during construction, the Participating TO Interconnecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(67) at aAt any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOInterconnecting Transmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(7) the 8) tThe Interconnection Customer shall indemnify the CAISO and Participating TO Interconnecting Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 (Indemnity);
(9) tThe Interconnection Customer shall transfer control of Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Interconnecting Transmission Owner prior to the In-Service Date;
(10) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Interconnecting Transmission Owner prior to the In-Service Date;
(11) Interconnecting Transmission Owner shall approve and accept for operation and maintenance the Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2;
(12) Interconnection Customer shall deliver to Interconnecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by Interconnecting Transmission Owner to assure that the Interconnection Facilities and Stand Alone Network Upgrades are built to the standards and specifications required by Interconnecting Transmission Owner; and
(13) Interconnection Customer shall pay Interconnecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for Interconnecting Transmission Owner to execute responsibilities enumerated to Interconnecting Transmission Owner under this Article 5.2. Interconnecting Transmission Owner shall invoice Interconnection Customer for this total amount to be divided on a monthly basis pursuant to Article 12.
Appears in 4 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOInterconnecting Transmission Owner;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Interconnecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Interconnecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Interconnecting Transmission Owner a schedule for construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOInterconnecting Transmission Owner;
(5) at any time during construction, the Participating TO Interconnecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOInterconnecting Transmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Interconnecting Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 (Indemnity);
(8) the Interconnection Customer shall transfer control of Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Interconnecting Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Interconnecting Transmission Owner’s Interconnection Facilities and Stand-Alone Network Upgrades to Interconnecting Transmission Owner;
(10) Interconnecting Transmission Owner shall approve and accept for operation and maintenance the Interconnecting Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Interconnecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by Interconnecting Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Interconnecting Transmission Owner.
Appears in 3 contracts
Samples: Service Agreements, Large Generator Interconnection Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law Applicable Laws and Regulations to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider or its designee;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand- Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 3 contracts
Samples: Standard Generator Interconnection Agreement (Sgia), Standard Generator Interconnection Agreement (Sgia), Standard Generator Interconnection Agreement (Sgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer System Upgrade Facilities, Developer shall engineer, procure equipment, and construct the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s Transmission Owner; Developer's engineering, procurement and construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Transmission Owner or NYISO; At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Owner's Interconnection Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 3 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 3 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer System Upgrade Facilities, Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerTransmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Transmission Owner or NYISO; At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 3 contracts
Samples: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) Xxxxxxxxx agrees to comply with all applicable provisions of Section 220 of the Participating TO New York State Labor Law (“Section 220”), as it may be amended from time to time. Pursuant to the requirements of Section 220, Xxxxxxxxx agrees that, for work performed on existing Connecting Transmission Owner Facilities (i.e., “public work”)
(a) Each laborer, xxxxxxx or mechanic shall reviewbe paid no less than the prevailing wage as defined in Section 220,
(b) The filing of payrolls should be made in a manner consistent with subdivision three-a (3(a)) of Section 220; this is a condition precedent to the payment of any sums due and owing to any person for work done upon the project, and
(c) No laborer, worker or mechanic shall be permitted or required to work more than eight hours on one calendar day or more than five days in any one week except in cases of extraordinary emergency including fire, flood or danger to life or property.1
(4) Connecting Transmission Owner shall review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(45) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner;
(56) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
1 Developer reserves its rights set forth in Section 220 to obtain dispensation permitting laborers, workers and mechanics to work additional hours or days per week.
(67) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s System Upgrade Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 8) Developer shall indemnify the CAISO and Participating TO Connecting Transmission Owner for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(9) Developer shall transfer control of System Upgrade Facilities to the Connecting Transmission Owner;
(10) Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of System Upgrade Facilities to Connecting Transmission Owner;
(11) The Connecting Transmission Owner shall be responsible for operation and maintenance the System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2, and Connecting Transmission Owner may transfer that responsibility to a third party by contract. Developer and Connecting Transmission Owner have entered into an operations and maintenance agreement of the Astoria Annex Substation, which governs the operations and maintenance of the Astoria Annex Substation, which O&M Agreement may be amended, terminated and/or expire pursuant to its own terms.
(12) Developer shall deliver to Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by Connecting Transmission Owner to assure that the System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 3 contracts
Samples: Transmission Facility Interconnection Agreement, Transmission Facility Interconnection Agreement, Transmission Facility Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider’s Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider “as-built” drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand- Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 3 contracts
Samples: Large Generator Interconnection Agreement, Large Generator Interconnection Agreement, Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities Connecting Transmission Owner’s
5.2.3 Connecting Transmission Owner shall review and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;Connecting Transmission SERVICE AGREEMENT NO. 2795
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 18.15.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.2. The Connecting
Appears in 3 contracts
Samples: Service Agreement, Large Generator Interconnection Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 3 contracts
Samples: Interconnection Agreement, Large Generator Interconnection Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law and Applicable Reliability Standards to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2.; and
(11) Interconnection Customer shall deliver to Transmission Provider “as-built” drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand- Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s SERVICE AGREEMENT NO. 1894 Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner; Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner; Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 0; and Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;Connecting Transmission Owner; -12 SERVICE AGREEMENT NO. 2217
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s System Upgrade Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO and Participating TO Connecting Transmission Owner for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection System Upgrade Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Developer shall transfer control of System Upgrade Facilities to the Connecting Transmission Owner;
(9) Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of System Upgrade Facilities to Connecting Transmission Owner;
(10) The Connecting Transmission Owner shall be responsible for operation and maintenance the System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2, and Connecting Transmission Owner may transfer that responsibility to a third party by contract.
(11) Developer shall deliver to Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by Connecting Transmission Owner to assure that the System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 2 contracts
Samples: Service Agreement, Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Connecting Transmission Owner’s
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law and Applicable Reliability Standards to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the upon a rigorous showing of cause, Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand- Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 2 contracts
Samples: Qualifying Facility Large Generator Interconnection Agreement, Qualifying Facility Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject SERVICE AGREEMENT NO. 2334 in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Connecting Transmission Owner’s
Appears in 2 contracts
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; gain right to At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 2 contracts
Samples: Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections inspections, at Interconnection Customer’s cost, of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand- Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2;
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents in compliance with Transmission Provider’s standards that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider; and
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Provider the actual costs pursuant to Article 11.5 of this LGIA for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Connecting Transmission Owner’s SERVICE AGREEMENT NO. 2344
Appears in 2 contracts
Samples: Lgia No. 2344, Lgia No. 2344
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) The Interconnection Customer shall transfer control of the Participating TO's Interconnection Facilities to the Participating TO and shall transfer Operational Control of Stand Alone Network Upgrades to the CAISO;
(9) Unless the Parties otherwise agree, the Interconnection Customer shall transfer ownership of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades to the Participating TO. As soon as reasonably practicable, but within twelve months after completion of the construction of the Participating TO’s Interconnection Facilities and Stand Alone Network Upgrades, the Interconnection Customer shall provide an invoice of the final cost of the construction of the Participating TO’s Interconnection Facilities and Stand Alone Network Upgrades to the Participating TO, which invoice shall set forth such costs in sufficient detail to enable the Participating TO to reflect the proper costs of such facilities in its transmission rate base and to identify the investment upon which refunds will be provided;
(10) the Participating TO shall accept for operation and maintenance the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of the “Option to Build” conditions set forth in Appendix C. Interconnection Customer shall deliver to the Participating TO “as-built” drawings, information, and any other documents that are reasonably required by the Participating TO to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by the Participating TO.
Appears in 2 contracts
Samples: Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.10 Indemnity;
(8) Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
(9) Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
(10) Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 0; and
(11) Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 2 contracts
Samples: Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Provider the agreed upon amount of [TBD] for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article 5.
Appears in 2 contracts
Samples: Surplus Large Generator Interconnection Agreement, Surplus Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades,Upgrades after receipt of
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner's Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
Appears in 2 contracts
Samples: Generator Interconnection Agreement, Provisional Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1NYISO for
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;System Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
5.2.9 Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1NYISO for
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement (Lgia), Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s engineering, procurement and construction of the 7KH ,QWHUFRQQHFWLRQ &XVWRPHU¶Vns truHctQionJoLf tQheHHULQJ S Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and 3DUWLFLSDWLQJ 72¶V DSSURYDO RI WKH HQJLQHHULQ the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 2 contracts
Samples: Standard Large Generator Interconnection Agreement, Standard Large Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;or
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;Connecting
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s
(8) Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
(9) Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
(10) Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 18.15.2; and
(11) Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 2 contracts
Samples: Interconnection Agreement, Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior Prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Alone
Appears in 1 contract
Samples: Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,, or assumes responsibility for any stand-alone task, such as telecommunications, environmental, or real-estate related work: LARGE GENERATOR INTERCONNECTION AGREEMENT
(1) within six (6) months of the execution of this LGIA, or at a later date agreed to by the Parties, the Interconnection Customer will submit to the CAISO and the Participating TO a milestone schedule for the design, procurement, and construction of the Stand Alone Network Upgrades, or any stand-alone task assumed by the Interconnection Customer. The milestone schedule will be required to support the Interconnection Customer’s Commercial Operation Date, and any Appendix B Milestones will be amended to include the milestone schedule for the Stand Alone Network Upgrades;
(2) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(23) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(34) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(45) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(56) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(67) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's LARGE GENERATOR INTERCONNECTION AGREEMENT Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) 8) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; gain right to At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Connecting Transmission Owner’s
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article
18.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 18.15.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 1 contract
Samples: Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Owner's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction construc tion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner in accordance with Appendix B;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for Transmission Owner to execute the responsibilities enumerated to Transmission Owner under Article 5.
Appears in 1 contract
Samples: Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the designdesign and engineering, procurement and and/or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,, Interconnection Customer shall:
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Provider’ Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using complying with the standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all Applicable Laws and Regulations and all insurance requirements, warranties, shipping insurance, storage protocols, and other policies and requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, provide Transmission Provider with the engineering design, equipment acceptance tests, and the construction drawings of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, Upgrades for Transmission Provider to review and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesapprove;
(4) prior to commencement of construction, the Interconnection Customer shall construction provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests any request for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO shall have the right to gain grant unrestricted access to the Participating TO's Interconnection Facilities Transmission Provider and Stand Alone Network Upgrades and allow Transmission Provider to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades;
(6) be obligated to remedy deficiencies in that portion of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades that do not meet the standards and specifications provided by Transmission Provider at any time during construction;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider unless the Parties otherwise agree; and
(10) obtain Transmission Provider’s approval and acceptance for operation and maintenance of Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades prior to the In-Service Date; and
(11) deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand Alone Network Upgrades are built to the standards and specifications required by Transmission Provider. Upon Interconnection Customer’s assumption of the responsibility for the design, procurement and/or construction of Transmission Provider’s Interconnection Facilities and Stand Alone Network Upgrades, Transmission Provider shall:
(12) review and approve the engineering design, equipment acceptance tests, and the construction of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades; and
(13) approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent such facilities and upgrades are engineered, procured, and constructed in accordance with this Article 5.2.
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner; Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner; Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 0; and Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
5.2.9 Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 5.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of $341,800 for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article
18.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand- Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 18.15.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as- built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Provider the agreed upon amount of [$ PLACEHOLDER] for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article 5.
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TOconstruction site for the Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;; Midwest ISO First Revised Sheet No. 1714Z.66 FERC Electric Tariff, Third Revised Volume No. 1 Superseding Original Sheet No. 1714Z.66
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) the Interconnection Customer shall transfer control of Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner's Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Provider “as-built” drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
Appears in 1 contract
Samples: Distribution Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities Connecting Transmission Owner’s
5.2.3 Connecting Transmission Owner shall review and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s SERVICE AGREEMENT NO. 2629
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 18.15.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of $700,000 for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.
Appears in 1 contract
Samples: Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement procurement, and construction of the Participating TO's TVA’s Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's TVA’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided provide in advance by the Participating TO;TVA.
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO TVA would be subject in the engineering, procurement or construction of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO TVA shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades; Contract No.
(4) Upon receipt of notice of Interconnection Customer’s election to exercise the Option to Build, which TVA shall undertake all environmental reviews required by law according to TVA’s standard practices and procedures. All environmental reviews shall be complete prior to TVA’s approval shall not be unreasonably withheldof Interconnection Customer’s engineering design and prior to commencement of construction by the Interconnection Customer.
(5) Interconnection Customer must ensure that all activities to engineer, procure, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's construct TVA’s Interconnection Facilities and Stand Alone Network Upgrades;Upgrades are in compliance with TVA wage rate provisions as defined in Section FP-4.3.
(46) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, TVA a schedule for construction of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTVA;
(57) at any time during construction, the Participating TO TVA shall have the right to gain unrestricted access to the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) 8) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTVA, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades;
(79) the Interconnection Customer shall indemnify the CAISO and Participating TO TVA for claims arising from the Interconnection Customer's construction of the Participating TOTVA's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1Section GP-8.1 Indemnification;
(10) Interconnection Customer shall transfer control of TVA's Interconnection Facilities and Stand Alone Network Upgrades to TVA;
(11) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of TVA's Interconnection Facilities and Stand-Alone Network Upgrades to TVA;
(12) TVA shall approve and accept for operation and maintenance TVA's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Section 6.1.2; and
(13) Interconnection Customer shall deliver to TVA "as-built" drawings, information, and any other documents that are reasonably required by TVA to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by TVA.
(14) If Interconnection Customer exercises the Option to Build pursuant to Section 6.1.1, Interconnection Customer shall pay TVA the agreed upon amount of [$ PLACEHOLDER] for TVA to execute the responsibilities enumerated to TVA under Section 6.1.2. TVA shall invoice Interconnection Customer for this total amount to be divided on a monthly basis pursuant to Section GP-1.1. Contract No.
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection MHVDC Connection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network UpgradesNecessary Upgrades after receipt of all required approvals from Governmental Authorities necessary to commence construction,
(1) the Interconnection MHVDC Connection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection MHVDC Connection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades shall comply with all requirements of law or Governmental Authorities to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests (including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior Prior to commencement of construction, the Interconnection MHVDC Connection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at At any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection construction site for the Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection MHVDC Connection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network UpgradesNecessary Upgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection MHVDC Connection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection MHVDC Connection Customer's ’s construction of the Participating TO's Interconnection Transmission Owner’s Connection Facilities and Stand Alone Network Necessary Upgrades under the terms and procedures applicable to Article 18.113;
(8) MHVDC Connection Customer shall transfer control of the Transmission Owner’s Connection Facilities and Necessary Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, MHVDC Connection Customer shall transfer ownership of the Transmission Owner’s Connection Facilities and Necessary Upgrades to Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Connection Facilities and Necessary Upgrades to the extent engineered, procured, and constructed in accordance with this Section 5.5.2 only if the Transmission Owner’s Connection Facilities and Necessary Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) MHVDC Connection Customer shall deliver to Transmission Owner “as- built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Connection Facilities and Necessary Upgrades are built to the standards and specifications required by Transmission Owner.
Appears in 1 contract
Samples: Transmission Connection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities Connecting Transmission Owner’s
5.2.3 Connecting Transmission Owner shall review and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;Connecting Transmission SERVICE AGREEMENT NO. 2836
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 18.15.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.2. The Connecting
Appears in 1 contract
Samples: Service Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner;
(2) The Interconnection CustomerDeveloper’s engineering, procurement and construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOTransmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;; Issued by: Xxxxxx X. Xxxxxxxx, Dir. Reg. Affairs Effective: April 2, 2008 Issued on: April 23, 2008 New York Independent System Operator, Inc. FERC Electric Tariff, Original Volume No. 1 Original Sheet No. 22 Service Agreement No. 1311
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer Developer shall indemnify the CAISO Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.1
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law and Applicable Reliability Standards to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Provider the agreed upon amount of [$ PLACEHOLDER] for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article 5.
Appears in 1 contract
Samples: Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,:
(1) the 5.2.1 Interconnection Customer shall engineer, procure equipment, equipment and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The 5.2.2 Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO 5.2.3 Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;,
(4) 5.2.4 prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) 5.2.5 at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) 5.2.6 at any time during construction, should any phase of the engineering, equipment procurement, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
5.2.7 (7) the Intentionally Omitted);
5.2.8 Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the transfer control of Transmission Provider's
5.2.9 unless Parties otherwise agree, Interconnection Customer's construction Customer shall transfer ownership of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under to Transmission Provider;
5.2.10 Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the terms extent engineered, procured and procedures applicable constructed in accordance with this Article 5.2; and
5.2.11 Interconnection Customer shall deliver to Article 18.1Transmission Provider "as-built"
5.2.12 If Interconnection Customer exercises the Option to Build pursuant to Article
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;or
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO 5.2.3 Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 18.15.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of $700,000 for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner; Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner; Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.20; and Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades:,
(1) the 5.2.1 Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The 5.2.2 Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO 5.2.3 Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) 5.2.4 prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) 5.2.5 at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) 5.2.6 at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network UpgradesUpgrades;
5.2.7 (Intentionally Omitted);
(7) the 5.2.8 Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction transfer control of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under to Transmission Provider;
5.2.9 unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
5.2.10 Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the terms extent engineered, procured, and procedures applicable constructed in accordance with this Article 5.2; and
5.2.11 Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
5.2.12 If Interconnection Customer exercises the Option to Build pursuant to Article 18.15.1.3, Interconnection Customer shall pay Transmission Provider the agreed upon amount of [PLACEHOLDER] for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article 5.2. Transmission Provider shall invoice Interconnection Customer according to the schedule provided in Appendix B.
Appears in 1 contract
Samples: Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,
(1) System Upgrade Facilities, the Interconnection Customer following conditions apply: Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection CustomerConnecting Transmission Owner; Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(3) the Participating TO System Upgrade Facilities; Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior System Upgrade Facilities; Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TO;
(5) at Connecting Transmission Owner or NYISO; At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at ; At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer System Upgrade Facilities; Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity; Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities
5.2.3 Connecting Transmission Owner shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities review and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
5.2.9 Unless the Developer and Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 5.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.2. The Connecting Transmission Owner shall invoice Developer for this total amount to be divided on a monthly basis pursuant to Article 12.
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Transmission Provider for claims arising from the Interconnection Customer's construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand-Alone Network Upgrades to Transmission Provider;
(10) Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2;
(11) Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Provider; and
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Provider the agreed upon amount of [$ PLACEHOLDER] for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article 5.
Appears in 1 contract
Samples: Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,the
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand- Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
Appears in 1 contract
Samples: Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the the. If Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTODistribution Provider;
(2) The the Interconnection Customer’s engineering, procurement and construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO TODistribution Provider would be subject in the engineering, procurement or construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO TODistribution Provider shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, ,approve the engineering design, equipment acceptance tests, and the construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, ,Distribution Provider a schedule for construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTO;Distribution Provider;
(5) at any time during construction, the Participating TO TODistribution Provider shall have the right to gain unrestricted access to the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the theDistribution Provider, Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO TODistribution Provider for claims arising from the Interconnection Customer's construction of the Participating TOTO'sDistribution Provider's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) the Interconnection Customer shall transfer control of the Participating TO'sDistribution Provider's Interconnection Facilities to the Participating TODistribution Provider and shall transfer Operational Control of Stand Alone Network Upgrades to the CAISO; ISO;
(9) unless theUnless Parties otherwise agree, the Interconnection Customer shall transfer ownership of the Participating TO'sDistribution Provider’s Interconnection Facilities and Stand -Alone Network Upgrades to Distribution Provider;
(10) the Participating TO. As soon as reasonably practicable, but within twelve months after completion of the construction of the Participating TO’s Interconnection Facilities and Stand Alone Network Upgrades, the Interconnection CustomerDistribution Provider shall provide an invoice of the final cost of the construction of the Participating TO’s Interconnection Facilities and Stand Alone Network Upgrades to the Participating TO, which invoice shall set forth such costs in sufficient detail to enable the Participating TO to reflect the proper costs of such facilities in its transmission rate base and to identify the investment upon which refunds will be providedapprove and ;
Appears in 1 contract
Samples: Standard Large Generator Interconnection Agreement (Lgia)
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,, or assumes responsibility for any stand-alone task, such as telecommunications, environmental, or real-estate related work:
(1) within six (6) months of the execution of this LGIA, or at a later date agreed to by the Parties, the Interconnection Customer will submit to the CAISO and the Participating TO a milestone schedule for the design, procurement, and construction of the Stand Alone Network Upgrades, or any stand-alone task assumed by the Interconnection Customer. The milestone schedule will be required to support the Interconnection Customer’s Commercial Operation Date, and any Appendix B Milestones will be amended to include the milestone schedule for the Stand Alone Network Upgrades;
(2) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(23) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(34) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(45) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(56) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(67) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) 8) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOJEA;
(2) The Interconnection Customer’s 's engineering, procurement and construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO JEA would be subject in the engineering, procurement or construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO JEA shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior Prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, JEA a schedule for construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOJEA;
(5) at any time during construction, the Participating TO JEA shall have the right to gain unrestricted access to the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOJEA, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO JEA for claims arising from the Interconnection Customer's construction of the Participating TOJEA's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of JEA's Interconnection Facilities and Stand Alone Network Upgrades to JEA;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of JEA's Interconnection Facilities and Stand-Alone Network Upgrades to JEA;
(10) JEA shall approve and accept for operation and maintenance JEA's Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to JEA "as-built" drawings, information, and any other documents that are reasonably required by JEA to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by JEA.
Appears in 1 contract
Samples: Jea Agreement for Generator Interconnection to Transmission System (Jagits)
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;Connecting SERVICE AGREEMENT NO. 2847
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities Connecting Transmission Owner’s
5.2.3 Connecting Transmission Owner shall review and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Article 18.1Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(3) the Participating TO Connecting Transmission Owner shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior Prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;
(6) at At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO Connecting Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities under the terms and procedures applicable to Article 18.118.1 Indemnity;
(8) Interconnection Customer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the Connecting Transmission Owner;
(9) Unless the Interconnection Customer and Connecting Transmission Owner otherwise agree, Interconnection Customer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
(10) Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
(11) Interconnection Customer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
Appears in 1 contract
General Conditions Applicable to Option to Build. If the Interconnection Customer Developer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades,System Upgrade Facilities, the following conditions apply:
(1) the Interconnection Customer 5.2.1 Developer shall engineer, procure equipment, and construct the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOConnecting Transmission Owner;
(2) The Interconnection Customer5.2.2 Developer’s engineering, procurement and construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities shall comply with all requirements of law to which the Participating TO Connecting Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities Connecting Transmission Owner’s
5.2.3 Connecting Transmission Owner shall review and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(4) prior 5.2.4 Prior to commencement of construction, the Interconnection Customer Developer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Connecting Transmission Owner and NYISO a schedule for construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities, and shall promptly respond to requests for information from the Participating TOConnecting Transmission Owner or NYISO;
(5) at 5.2.5 At any time during construction, the Participating TO Connecting Transmission Owner shall have the right to gain unrestricted access to the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities and to conduct inspections of the same;; SERVICE AGREEMENT NO. 2452
(6) at 5.2.6 At any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades System Upgrade Facilities not meet the standards and specifications provided by the Participating TOConnecting Transmission Owner, the Interconnection Customer Developer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network UpgradesSystem Upgrade Facilities;
(7) the Interconnection Customer 5.2.7 Developer shall indemnify the CAISO Connecting Transmission Owner and Participating TO NYISO for claims arising from the Interconnection Customer's Developer’s construction of the Participating TO's Interconnection Connecting Transmission Owner’s
5.2.8 Developer shall transfer control of Connecting Transmission Owner’s Attachment Facilities and Stand Alone Network Upgrades under System Upgrade Facilities to the terms Connecting Transmission Owner;
5.2.9 Unless the Developer and procedures applicable Connecting Transmission Owner otherwise agree, Developer shall transfer ownership of Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to Connecting Transmission Owner;
5.2.10 Connecting Transmission Owner shall approve and accept for operation and maintenance the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the extent engineered, procured, and constructed in accordance with this Article 5.2; and
5.2.11 Developer shall deliver to NYISO and Connecting Transmission Owner “as built” drawings, information, and any other documents that are reasonably required by NYISO or Connecting Transmission Owner to assure that the Attachment Facilities and Stand Alone System Upgrade Facilities are built to the standards and specifications required by Connecting Transmission Owner.
5.2.12 If Developer exercises the Option to Build pursuant to Article 18.15.1.3, the Developer shall pay the Connecting Transmission Owner the agreed upon amount of the Connecting Transmission Owner’s actual costs for the Connecting Transmission Owner to execute the responsibilities enumerated to Connecting Transmission Owner under Article 5.
Appears in 1 contract
Samples: Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades,Upgrades after receipt of all required approvals from Governmental Authorities necessary to commence
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Owner, or as required by any Governmental Authority;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law or Governmental Authority to which the Participating TO Transmission Owner would be subject in the engineering, procurement or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall reviewTransmission Provider, at Transmission Provider’s option, and the Interconnection Customer Transmission Owner shall obtain the Participating TO’s approval of, be entitled to review and approve the engineering design, equipment acceptance tests(including witnessing of acceptance tests), and the construction (including monitoring of construction) of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, which approval and shall not be unreasonably withheld, and have the CAISO may, at its option, review the engineering right to reject any design, procurement, construction or acceptance test of any equipment acceptance teststhat does not meet the standards and specifications of Transmission Provider, Transmission Owner and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgradesany Governmental Authority;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider and Transmission Owner a schedule for construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider and Transmission Owner;
(5) at any time during construction, the Participating TO Transmission Provider and Transmission Owner shall have the right to gain unrestricted access to the Participating TO's construction site for the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Owner, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network UpgradesUpgrades to meet the standards and specifications provided by Transmission Provider and Transmission Owner;
(7) the Interconnection Customer shall indemnify the CAISO Transmission Provider and Participating TO Transmission Owner for claims arising from the Interconnection Customer's ’s construction of the Participating TO's Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1, Indemnity;
(8) Interconnection Customer shall transfer control of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner;
(9) Unless Parties otherwise agree, Interconnection Customer shall transfer ownership of the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to Transmission Owner in accordance with Appendix B;
(10) Transmission Provider, at Transmission Provider’s option, and Transmission Owner shall approve and accept for operation and maintenance the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades to the extent engineered, procured, and constructed in accordance with this Article 5.2 only if the Transmission Owner’s Interconnection Facilities and Stand Alone Network Upgrades meet the standards and specifications of Transmission Provider, Transmission Owner and any Governmental Authority.
(11) Interconnection Customer shall deliver to Transmission Owner “as-built” drawings, information, and any other documents that are reasonably required by Transmission Owner to assure that the Interconnection Facilities and Stand-Alone Network Upgrades are built to the standards and specifications required by Transmission Owner.
(12) If Interconnection Customer exercises the Option to Build pursuant to Article 5.1.3, Interconnection Customer shall pay Transmission Owner the agreed upon amount of [$ PLACEHOLDER] for Transmission Owner to execute the responsibilities enumerated to Transmission Owner under Article 5.
Appears in 1 contract
Samples: Generator Interconnection Agreement
General Conditions Applicable to Option to Build. If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades:,
(1) the 5.2.1 Interconnection Customer shall engineer, procure equipment, and construct the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TOTransmission Provider;
(2) The 5.2.2 Interconnection Customer’s 's engineering, procurement and construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO Transmission Provider would be subject in the engineering, procurement or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO 5.2.3 Transmission Provider shall review, review and the Interconnection Customer shall obtain the Participating TO’s approval of, approve the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
(4) 5.2.4 prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, Transmission Provider a schedule for construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TOTransmission Provider;
(5) 5.2.5 at any time during construction, the Participating TO Transmission Provider shall have the right to gain unrestricted access to the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) 5.2.6 at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TOTransmission Provider, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades;
5.2.7 (7) the Intentionally Omitted);
5.2.8 Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction transfer control of the Participating TOTransmission Provider's Interconnection Facilities and Stand Alone Network Upgrades under to Transmission Provider;
5.2.9 unless Parties otherwise agree, Interconnection Customer shall transfer ownership of Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to Transmission Provider;
5.2.10 Transmission Provider shall approve and accept for operation and maintenance Transmission Provider's Interconnection Facilities and Stand Alone Network Upgrades to the terms extent engineered, procured, and procedures applicable constructed in accordance with this Article 5.2; and
5.2.11 Interconnection Customer shall deliver to Transmission Provider "as-built" drawings, information, and any other documents that are reasonably required by Transmission Provider to assure that the Interconnection Facilities and Stand Alone Network Upgrades are built to the standards and specifications required by Transmission Provider.
5.2.12 If Interconnection Customer exercises the Option to Build pursuant to Article 18.15.1.3, Interconnection Customer shall pay Transmission Provider the agreed upon amount of [PLACEHOLDER] for Transmission Provider to execute the responsibilities enumerated to Transmission Provider under Article 5.2. Transmission Provider shall invoice Interconnection Customer according to the schedule provided in Appendix B.
Appears in 1 contract
Samples: Standard Large Generator Interconnection Agreement (Lgia)
