Girder Detailing Clause Samples

Girder Detailing. 1. Minimum Top Flange Thickness a. Girders shall have a minimum top flange thickness of 200 mm except that the minimum thickness shall be increased to 230 mm in anchorage zones where transverse post-tensioning is used. 2. Minimum Web Thickness a. Girders shall have a minimum web thickness of: i. 200 mm if there are no longitudinal post-tensioning tendons in the webs; and ii. 300 mm if there are longitudinal post-tensioning tendons in the webs. 3. Closure Segment a. Cast-in-place concrete closure joints wider than 225 mm shall be reinforced with reinforcing steel.
View Source

Related to Girder Detailing

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4. 5.7.2 BellSouth shall make available the following channelization systems and interfaces: 5.7.2.1 DS1 Channelization System: channelizes a DS1 signal into a maximum of twenty- four (24)

  • Notice Details Party A: Swiss Re Financial Products Corporation Address: ▇▇ ▇▇▇▇ ▇▇/▇▇/ ▇▇▇▇▇▇ ▇▇/▇▇/ ▇▇▇▇▇ ▇▇▇ ▇▇▇▇ ▇▇ ▇▇▇▇▇ ▇▇▇ Facsimile No.: +▇ ▇▇▇ ▇▇▇ ▇▇▇▇ Attention: Head of Operations Party B: Permanent Financing (No. 6) PLC 27 Address: ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇ ▇▇▇ Facsimile Number: 020 7566 0975 Attention: The Secretary With a copy to: (i) the Security Trustee:

  • DELIVERY, STORAGE, AND HANDLING The Contractor shall be responsible to inspect all components on delivery to ensure that no damage occurred during shipping or handling for furnish and installation projects. For equipment only purchases, the ordering entity shall be responsible to inspect all components on delivery. Materials must be stored in original undamaged packaging in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism, and theft until ready for installation.

  • Data Universal Number System (DUNS) number Requirement Grantee will provide their valid DUNS number contemporaneous with execution of this Agreement.

  • Porcupine Site Highway 11 and the City of Timmins Thunder Bay and District Toronto/York-Peel