Common use of Governance and Responsibilities Clause in Contracts

Governance and Responsibilities. (a) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from Customer (e) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) The SAP employees assigned to the CAE Services will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from Customer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (i) immediately respond; (ii) take the required action; or (iii) request a suspension of the Build Phase subject to Customer assuming any additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail within 24 hours. Should Customer not respond without 24 hours, the overall Build Phase timeline will be extended, at minimum, by the time associated with Customer’s delay. (e) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) The SAP employees assigned to the CAE Services will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a1) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b2) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c3) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d4) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services for Cloud specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from CustomerCustomer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (a) immediately respond; (b) take the required action; or (c) request a suspension of the Build Phase subject to Customer assuming any additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail within 24 hours. Should Customer not respond without 24 hours, the overall Build Phase timeline will be extended, at minimum, by the time associated with Customer’s delay. (5) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f6) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g7) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) 8) The SAP employees assigned to the CAE Services for Cloud will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a1) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b2) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c3) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d4) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services for Cloud specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from CustomerCustomer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (a) immediately respond; (b) take the required action; or (c) request a suspension of the Build Phase subject to Customer assuming any additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail within 24 hours. Should Customer not respond without 24 hours, the overall Build Phase timeline will be extended, at minimum, by the time associated with Customer’s delay. (5) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f6) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to to, the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g7) Customer has to must ensure that he it has all necessary third party license rights required for developing and using the Features. (h) 8) The SAP employees assigned to the CAE Services for Cloud will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage the resources of their resources respective team and to check the progress of the Build Phase. (b) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services specified in the Order Form depend upon contributions or activities to be provided by Customer’s side. If SAP considers that a material contribution, activities, response or action required from Customer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (i) respond without delay impacted the milestone plan; (ii) take the required action; or (iii) request a suspension of the Build Phase subject to Customer assuming alone any responsibility of such suspension and any potential additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail without delay impacted the milestone plan, within 24 hours as strongly recommended. Should Customer not respond without such, the overall Build Phase timeline may be extended, at minimum, by the time associated with Customer’s delay. (e) If information or documentation contributed by Customer proves to be is incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements, assuming any impact as specified hereabove. (f) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees or his team member(s) to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees or his team members it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g) Customer has to ensure that he has all necessary third party license rights or authorizations required for developing and using the Features. (h) The SAP employees assigned to the CAE Services will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a1) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b2) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c3) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d4) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services for Cloud specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from CustomerCustomer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (a) immediately respond; (b) take the required action; or (c) request a suspension of the Build Phase subject to Customer assuming any additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail within 24 hours. Should Customer not respond within 24 hours, the overall Build Phase timeline will be extended, at minimum, by the time associated with Customer’s delay. (5) If information or documentation contributed by Customer proves to be incorrect, incompleteincomp lete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f6) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g7) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) 8) The SAP employees assigned to the CAE Services for Cloud will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a1) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b2) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c3) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d4) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services for Cloud specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from CustomerCustomer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (a) immediately respond; (b) take the required action; or (c) request a suspension of the Build Phase subject to Customer assuming any additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail within 24 hours. Should Customer not respond within 24 hours, the overall Build Phase timeline will be extended, at minimum, by the time associated with Customer’s delay. (5) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f6) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g7) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) 8) The SAP employees assigned to the CAE Services for Cloud will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. Tata Kelola dan Tanggung Jawab‌ (a) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build PhasePhase./ Setiap pihak akan menunjuk narahubung utama untuk Fase Pembuatan. Narahubung utama dari setiap pihak bertanggung jawab khususnya untuk menyusun rencana penentu yang terperinci untuk Fase Pembuatan, mengelola sumber daya mereka, dan memeriksa kemajuan Fase Pembuatan. (b) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables.Deliverables./ (c) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee.committee./ (d) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from CustomerCustomer is delayed to a point that the Build Phase milestone plan is being negatively impacted or (e) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements.supplements./ (f) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks.tasks./ (g) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features.Features./ (h) The SAP employees assigned to the CAE Services will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.necessary./

Governance and Responsibilities. (a) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c) Customer or SAP HRMANTRA may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d) Customer acknowledges and agrees that SAPHRMANTRA’s ability to provide the CAE Services specified in the Order Form depend upon contributions to be provided by Customer. If SAP HRMANTRA considers that a material contribution, response or action required from Customer (e) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAPHRMANTRA) make the necessary corrections and/or supplements. (f) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP HRMANTRA as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) The SAP HRMANTRA employees assigned to the CAE Services will be under the direction of SAP HRMANTRA and will be located at SAP HRMANTRA sites. Travel of SAP HRMANTRA employees shall be agreed upon between the parties as deemed necessary.

Governance and Responsibilities. (a1) Each party shall designate a main contact for the Build Phase. The main contacts from each party are in particular responsible for the creation of a detailed milestone plan for the Build Phase, to manage their resources and to check the progress of the Build Phase. (b2) Customer shall designate authorized individuals for acceptance or confirmation of Deliverables. (c3) Customer or SAP may request to establish a steering committee that meets at regular defined intervals to discuss the progress of the Build Phase and to resolve any issues arising during the Build Phase that cannot be resolved through consultation of the teams. The steering committee takes fundamental decisions within the Build Phase and exercises control functions. Each party shall designate suitable representatives to serve on a steering committee. The representatives of the steering committee must be empowered to take decisions for the respective party which they represent in the steering committee. (d4) Customer acknowledges and agrees that SAP’s ability to provide the CAE Services for Cloud specified in the Order Form depend upon contributions to be provided by Customer. If SAP considers that a material contribution, response or action required from Customer is delayed to a point that the Build Phase milestone plan is being negatively impacted or cannot reasonably be met due to such delay, SAP will promptly inform Customer in writing. Customer shall then either: (a) immediately respond; (b) take the required action; or (c) request a suspension of the Build Phase subject to Customer assuming any additional costs associated with such suspension on the basis of the then current SAP rates. Customer agrees to respond to any notice provided pursuant to this section via e-mail within 24 hours. Should Customer not respond without 24 hours, the overall Build Phase timeline will be extended, at minimum, by the time associated with Customer’s delay. (e5) If information or documentation contributed by Customer proves to be incorrect, incomplete, ambiguous or cannot be followed from an objective point of view, Customer will immediately (particularly after being requested by SAP) make the necessary corrections and/or supplements. (f6) Customer’s collaboration is required throughout the Build Phase and includes, but is not limited to the tasks listed in the applicable Order Form. Customer will identify particular employees to SAP as technical liaisons and participants in Customer’s Acceptance Test and warrants that they will be available to participate as and when required. Customer will ensure that all of the employees it assigns to the Build Phase are proficient and suitably qualified to carry out their tasks. (g7) Customer has to ensure that he has all necessary third party license rights required for developing and using the Features. (h) 8) The SAP employees assigned to the CAE Services for Cloud will be under the direction of SAP and will be located at SAP sites. Travel of SAP employees shall be agreed upon between the parties as deemed necessary.