Common use of GUARANTEE COMPLIANCE Clause in Contracts

GUARANTEE COMPLIANCE. 5.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority and by the Seller unless otherwise stated. 5.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA approved Flight Manual. CES – A320 – 2010 Private & Confidential 5.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, at the Seller’s discretion) A320-200 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“the IFP”) appropriate to the Aircraft. 5.4 Compliance with the Manufacturer’s Weight Empty guarantees defined in Paragraph 3 shall be demonstrated with reference to a Weight Compliance Report. 5.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine manufacturer’s specification. 5.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s Aircraft.

GUARANTEE COMPLIANCE. 5.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority and by the Seller unless otherwise stated. 5.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA approved Flight Manual. CES – A320 A321 – 2010 Private & Confidential 5.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, at the Seller’s discretion) A320A321-200 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“the IFP”) appropriate to the Aircraft. 5.4 Compliance with the Manufacturer’s Weight Empty guarantees defined in Paragraph 3 shall be demonstrated with reference to a Weight Compliance Report. 5.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine manufacturer’s specification. 5.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s Aircraft.

GUARANTEE COMPLIANCE. 5.1 6.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority FAA and if not inconsistent with those defined by the Seller unless otherwise statedFAA, those defined by the Seller. 5.2 6.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA FAA approved Flight Manual. CES – A320 – 2010 Private & Confidential. 5.3 6.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority FAA shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, at the Seller’s discretion) A320-200 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“the IFP”) appropriate to the A320 Aircraft. 5.4 6.4 Compliance with the Manufacturer’s Weight Empty guarantees Guarantee defined in Paragraph 3 4 shall be demonstrated with reference to a Weight Compliance Reportweight compliance report. 5.5 6.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 6.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine Propulsion System manufacturer’s specification. 5.7 6.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s A320 Aircraft.

GUARANTEE COMPLIANCE. 5.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority and by the Seller unless otherwise stated. 5.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA approved Flight Manual. CES – A320 – 2010 Private & Confidential. 5.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, at the Seller’s discretion) A320A319-200 100 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“the IFP”) appropriate to the Aircraft. 5.4 Compliance with the Manufacturer’s Weight Empty guarantees defined in Paragraph 3 shall be demonstrated with reference to a Weight Compliance Report. 5.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine manufacturer’s specification. 5.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s Aircraft.

GUARANTEE COMPLIANCE. 5.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority and by the Seller unless otherwise stated. 5.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA approved Flight Manual. CES – A320 – 2010 *** This information is subject to confidential treatment and has been omitted and filed separately with the Commission. CT0803292 Private & Confidential 5.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, at the Seller’s 's discretion) A320-200 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“"the IFP”") appropriate to the Aircraft. 5.4 Compliance with the Manufacturer’s 's Weight Empty guarantees defined in Paragraph 3 shall be demonstrated with reference to a Weight Compliance Report. 5.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine manufacturer’s 's specification. 5.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s Aircraft.

GUARANTEE COMPLIANCE. 5.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority and by the Seller unless otherwise stated. 5.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA approved Flight Manual. CES – A320 – 2010 *** This information is subject to confidential treatment and has been omitted and filed separately with the Commission. CT0803292 Private & Confidential 5.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, at the Seller’s 's discretion) A320A321-200 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“"the IFP”") appropriate to the Aircraft. 5.4 Compliance with the Manufacturer’s 's Weight Empty guarantees defined in Paragraph 3 shall be demonstrated with reference to a Weight Compliance Report. 5.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine manufacturer’s 's specification. 5.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s Aircraft.

GUARANTEE COMPLIANCE. 5.1 Compliance with the Guarantees shall be demonstrated using operating procedures and limitations in accordance with those defined by the certifying Airworthiness Authority and by the Seller unless otherwise stated. 5.2 Compliance with the take-off, second segment and landing elements of the Guarantees will be demonstrated with reference to the JAA approved Flight Manual. CES – A320 – 2010 Private & Confidential. 5.3 Compliance with those parts of the Guarantees defined in paragraph 2 above not covered by the requirements of the certifying Airworthiness Authority shall be demonstrated by calculation based on data obtained during flight tests conducted on one (or more, more at the Seller’s 's discretion) A320A330-200 aircraft of the same aerodynamic configuration as the Aircraft purchased by the Buyer and incorporated in the In-Flight Performance Program and data bases (“"the IFP”") appropriate to the Aircraft. 5.4 Compliance with the Manufacturer’s 's Weight Empty guarantees defined in Paragraph 3 shall be demonstrated with reference to a Weight Compliance Report. 5.5 Data derived from tests will be adjusted as required using conventional methods of correction, interpolation or extrapolation in accordance with established aeronautical practices to show compliance with the Guarantees. 5.6 Compliance with the Guarantees is not contingent on engine performance defined in the engine manufacturer’s 's specification. 5.7 The Seller undertakes to furnish the Buyer with a report or reports demonstrating compliance with the Guarantees at, or as soon as possible after, the delivery of each of the Buyer’s 's Aircraft.