Impact Protective Systems ASTM E1886 Sample Clauses

Impact Protective Systems ASTM E1886. 2.1.1.1 Material Standard ASTM B221 ASTM B221M; 6063-T5 alloy and tempered. Provide door stile and rail face dimensions of the entrance doors as indicated on drawings. Provide major portions of the door members at.125 inches nominal in thickness and glazing molding to be .050 inches thick.
AutoNDA by SimpleDocs

Related to Impact Protective Systems ASTM E1886

  • Fire, Life Safety, and Accessibility Codes The following codes, in the versions approved by the Georgia State Fire Marshal/Fire Safety Commissioner and Department of Human Resources, shall be used. The Design Professional will designate any additional codes or special modifications in the Supplementary General Conditions.

  • Information Technology Accessibility Standards Any information technology related products or services purchased, used or maintained through this Grant must be compatible with the principles and goals contained in the Electronic and Information Technology Accessibility Standards adopted by the Architectural and Transportation Barriers Compliance Board under Section 508 of the federal Rehabilitation Act of 1973 (29 U.S.C. §794d), as amended. The federal Electronic and Information Technology Accessibility Standards can be found at: xxxx://xxx.xxxxxx-xxxxx.xxx/508.htm.

  • Accident Prevention Health and Safety Committee The Employer and the Union agree that they mutually to maintain standards of safety and health in the Hospital in order to prevent accidents, injury, and illness. ected or Recognizing its responsibilities under the applicable legislation, the Hospital agrees to accept as a member of its Accident Prevention Health and Safety Committee, at least one (1) representative sel appointed by the Union from amongst Bargaining Unit employees. Such Committee shall identify potential dangers and means of improving health and safety programs, and recommend actions to be taken to improve conditions related to safety and health. The Hospital agrees to co-operate reasonably in providing necessary information to enable the Committee its functions. Meetings shall be held every second month or more frequently at the call of the Chair if required. The Committee shall maintain minutes of meetings and make the Same available for review. Any representative appointed or accordancewith hereof shall serve for a term of one (1) calendar year from the date of appointment which may be renewed for further of one (1) year. Time off for such to attend meetings of the Accident Prevention Health and Safety Committee in accordance with the foregoing shall be granted, and any attending such meetings during their regularly scheduled hours of work shall not lose regular as a result of such The Union agrees to endeavour to obtain the membership in the observation of all safety rules and practices. Safety Shoes The Hospital will provide sixty dollars ($60.00) annually effective April and eighty dollars ($80.00) effective April to each employee who is required by the Hospital, as delineated below, to wear safety footwear during the of his duties. The Hospital will require employees the following functions to wear appropriate Engineering Services; Grounds; Transport; (only where frequently working in storage areas). (as determined by the Hospital) heavy carts on a regular basis, e.g., linen carts, food wagons. ARTICLE BULLETIN BOARDS The Employer shall provide bulletin that all employees will have access to them have the right to post notices of meetings and such other notices as may be of interest to the membership. The wage increase listed on a retroactive to contact,in writing (with a copy to the Union) at their last-known entitle who have left its employ, to advise them of their any retroactive wage adjustment. Any employees who have employees shall have notice from the Hospital in which to claim from the Hospital any adjustment to their remuneration entitlement. The retroactive payments shall be made by separate cheques to the employees so entitled within sixty (60) days from the date of ratification. All other adjustments shall be effective as set out specifically in this Collective Agreement.

  • Human and Financial Resources to Implement Safeguards Requirements 6. The Borrower shall make available necessary budgetary and human resources to fully implement the EMP and the RP.

  • SECTION 109 OF THE HOUSING AND COMMUNITY DEVELOPMENT ACT OF 1974 The Contractor shall comply with the provisions of Section 109 of the Housing and Community Development Act of 1974. No person in the United States shall on the grounds of race, color, national origin, or sex be excluded from participation in, be denied the benefits of, or be subjected to discrimination under any program or activity funded in whole or in part with funds made available under this title. Section 109 further provides that discrimination on the basis of age under the Age Discrimination Act of 1975 or with respect to an otherwise qualified handicapped individual as provided in Section 504 of the Rehabilitation Act of 1973, as amended, is prohibited.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Joint Occupational Health and Safety Committee The Employer and the Union recognize the role of the joint Occupational Health and Safety Committee in promoting a safe and healthful workplace. The parties agree that a Joint Occupational Health and Safety Committee shall be established for each Employer covered by this Collective Agreement. The Committee shall govern itself in accordance with the provisions of the Industrial Health and Safety Regulations made pursuant to the Workers’ Compensation Act. The Committee shall be as between the Employer and the Union, with equal representation, and with each party appointing its own representatives. Representatives of the Union shall be chosen by the Union membership or appointed by the Union. All minutes of the meetings of the Joint Occupational Health & Safety Committee will be recorded in a mutually agreeable format and will be sent to the Union. The Union further agrees to actively pursue with the other Health Care Unions a Joint Union Committee for the purposes of this Article. The Employer agrees to provide or cause to be provided to Employer members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. The Union agrees to provide or cause to be provided to Union members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. Such training and orientation shall take place within six (6) months of taking office.

  • Procurement of Goods and Services (a) If the HSP is subject to the procurement provisions of the BPSAA, the HSP will abide by all directives and guidelines issued by the Management Board of Cabinet that are applicable to the HSP pursuant to the BPSAA.

  • OMNIBUS PROCUREMENT ACT OF 1992 It is the policy of New York State to maximize opportunities for the participation of New York State business enterprises, including minority and women-owned business enterprises as bidders, subcontractors and suppliers on its procurement contracts. Information on the availability of New York State subcontractors and suppliers is available from: NYS Department of Economic Development Division for Xxxxx Xxxxxxxx Xxxxxx, Xxx Xxxx 00000 Telephone: 000-000-0000 Fax: 000-000-0000 email: xxx@xxx.xx.xxx A directory of certified minority and women-owned business enterprises is available from: NYS Department of Economic Development Division of Minority and Women's Business Development 000 Xxxxx Xxxxxx Xxx Xxxx, XX 00000 212-803-2414 email: xxxxxxxxxxxxxxxxx@xxx.xx.xxx xxxxx://xx.xxxxxxxxxxxxxx.xxx/FrontEnd/VendorSearchPu blic.asp The Omnibus Procurement Act of 1992 requires that by signing this bid proposal or contract, as applicable, Contractors certify that whenever the total bid amount is greater than $1 million:

  • Health and Safety Standards Contractor shall abide by all health and safety standards set forth by the State of California and/or the County of Xxxxxx pursuant to the Injury and Illness Prevention Program. If applicable, Contractor must receive all health and safety information and training from County.

Time is Money Join Law Insider Premium to draft better contracts faster.