Common use of INSPECTION, ACCEPTANCE AND REJECTION Clause in Contracts

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall be subject to Buyer’s right of inspection. Buyer shall have fifteen (15) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications or any term of this Agreement. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, or Acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the Goods at the Supplier’s expense and risk. Supplier shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, unless delivery of such Goods is approved in advance by Buyer, and is accompanied by a written disclosure of Buyer’s prior rejection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall be subject to Buyer’s right of inspection. Buyer shall have fifteen ninety (1590) days (the “Inspection Period“”) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications or any term of this the Agreement. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the return rejected Goods to Supplier at the Supplier’s expense and riskrisk of loss for, at Buyer’s option, either: (i) full credit or refund of all amounts paid by Buyer to Supplier for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Title to rejected Goods that are returned to Supplier shall transfer to Supplier upon such delivery and such Goods shall not be replaced by Supplier except upon written instructions from Buyer. Supplier shall not deliver Goods that were previously rejected on grounds of non-compliance with this the Agreement, unless delivery of such Goods is approved in advance by Buyer, Buyer and is accompanied by a written disclosure of BuyerXxxxx’s prior rejection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall furnished under the applicable Purchase Order will be subject to Buyer’s right final inspection and approval at Buyer’s premises within a reasonable time after delivery, irrespective of inspectionpayment date. Buyer shall have fifteen (15) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon Upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications specifications of the applicable Purchase Order or any term of this Agreement. Buyer’s T&C. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period Seller notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect SupplierSeller’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the return rejected Goods to Seller at the SupplierSeller’s expense and riskrisk of loss for, at Xxxxx’s option, either: (i) full credit or refund of all amounts paid by Buyer to Seller for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Supplier Title to rejected Goods that are returned to Seller shall transfer to Seller upon such delivery and such Goods shall not be replaced by Seller except upon written instructions from Buyer. Seller shall not deliver Goods that were previously rejected on grounds of non-compliance with this AgreementXxxxx’s T&C, unless delivery of such Goods is approved in advance in writing by BuyerXxxxx, and is accompanied by a written disclosure of BuyerXxxxx’s prior rejection(s). Buyer reserves the right to have a representative (either Buyer’s personnel or contracted personnel) in Seller’s facilities to inspect any material covered by the applicable Purchase Order at any reasonable time from the start of manufacturing until final shipment of conforming Goods. Buyer and its designees shall have the right to audit and inspect Seller and Seller’s suppliers’ records and facilities to determine Seller’s and its supplier’s compliance with the Purchase Order. c. Regardless of delivery terms, title to and risk of loss of the Goods under the applicable Purchase Order shall not pass to Buyer until Xxxxx's receipt and acceptance of the Goods. Any damage to Goods caused during transit shall be repaired or replaced at Seller’s sole cost and expense. d. Buyer is not obligated to any minimum purchase or future purchase obligations under this Order. Forecasts, estimates and similar projections of Buyer are not purchase commitments.

INSPECTION, ACCEPTANCE AND REJECTION. a. a All shipments of Goods and performance of Services shall be subject to Buyer’s right of inspection. Buyer shall have fifteen ninety (1590) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications or any term of this Agreement. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect affect Supplier’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Services. b. . b Buyer shall be entitled to request replacement or repair of the return rejected Goods to Supplier at the Supplier’s expense and riskrisk of loss for, at Buyer’s option, either: (i) full credit or refund of all amounts paid by Buyer to Supplier for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Title to rejected Goods that are returned to Supplier shall transfer to Supplier upon such delivery and such Goods shall not be replaced by Supplier except upon written instructions from Buyer. Supplier shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, unless delivery of such Goods is approved in advance by BuyerXxxxx, and is accompanied by a written disclosure of BuyerXxxxx’s prior rejection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall be subject to Buyer’s right of inspection. Buyer shall have fifteen ninety (1590) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications or any term of this Agreement. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the return rejected Goods to Supplier at the Supplier’s expense and riskrisk of loss for, at Buyer’s option, either: (i) full credit or refund of all amounts paid by Buyer to Supplier for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Title to rejected Goods that are returned to Supplier shall transfer to Supplier upon such delivery and such Goods shall not be replaced by Supplier, except upon written instructions from Buyer. Supplier shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, unless delivery of such Goods is approved in advance by BuyerXxxxx, and is accompanied by a written disclosure of Buyer’s prior rejection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall be subject to BuyerMPAC’s right of inspectioninspection and acceptance. Buyer shall have fifteen (15) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer MPAC shall have the right to reject any Goods or Services that are not in conformance with the Specifications or any term of this Agreement, and any Goods that are delivered in excess of the quantity ordered or are damaged or defective. Transfer of title to Buyer MPAC of Goods shall not constitute BuyerMPAC’s Acceptance acceptance of those Goods. Buyer shall If, within 90 days after delivery, MPAC determines that any Goods and/or Services are defective, MPAC may reject them and, at MPAC’s option and at Vendor’s sole cost and expense, require Vendor to (i) provide Supplier a full credit or refund of all amounts paid by MPAC to Vendor for the rejected Goods, or (ii) replace the defective Goods or re-perform the defective Services within the Inspection Period notice of any time period specified by MPAC, acting reasonably. Title to rejected Goods or Services that are rejected, together returned to Vendor shall transfer to Vendor upon such delivery. Should Vendor fail to comply with the reasons for such rejection. If Buyer does not provide Supplier foregoing, MPAC may, at its option and in addition to any other recourse available to MPAC under this Agreement, terminate the Agreement, in whole or in part, with any notice of rejection within Vendor bearing all costs and risks associated with the Inspection Period, then Buyer will be deemed to have provided Acceptance of such rejected Goods or and/or Services. Buyer’s inspection, or Acceptance or use Vendor agrees to reimburse MPAC for all transportation and other related costs incurred and overpayments made in respect of the rejected Goods or Services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods or and/or Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the Goods at the Supplier’s expense and risk. Supplier Vendor shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, unless delivery of such Goods is approved in advance by Buyer, MPAC and is accompanied by a written disclosure of BuyerMPAC’s prior rejection(s). MPAC’s inspection, testing, or acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect Vendor’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, testing, acceptance and use of the Goods or Services.

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods goods and performance of Services services shall be subject to Buyer’s right of inspection. Buyer shall have fifteen ninety (1590) days (the “Inspection Period“) following the delivery of the Goods goods at the Delivery Point delivery point or performance of the Services services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods goods or Services services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods goods that are delivered in excess of the quantity ordered or which are damaged or defective. In addition, Buyer shall have the right to reject any Goods goods or Services services that are not in conformance with the Specifications specifications or any term of this Agreementagreement. Transfer of title to Buyer of Goods goods shall not constitute Buyer’s Acceptance acceptance of those Goodsgoods. Buyer shall provide Supplier within the Inspection Period inspection period notice of any Goods goods or Services services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Periodinspection period, then Buyer will be deemed to have provided Acceptance acceptance of such Goods goods or Servicesservices. Buyer’s inspection, testing, or Acceptance acceptance or use of the Goods goods or Services services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods goods or Servicesservices, and such warranties shall survive inspection, test, Acceptance acceptance and use of the Goods goods or Servicesservices. b. Buyer shall be entitled to request replacement or repair of the Goods return rejected goods to Supplier at the Supplier’s expense and riskrisk of loss for, at Buyer’s option, either: (i) full credit or refund of all amounts paid by Buyer to Supplier for the rejected goods; or (ii) replacement goods to be received within the time period specified by Buyer. Title to rejected goods that are returned to Supplier shall transfer to Supplier upon such delivery and such goods shall not be replaced by Supplier except upon written instructions from Buyer. Supplier shall not deliver Goods goods that were previously rejected on grounds of non-compliance with this Agreementagreement, unless delivery of such Goods goods is approved in advance by Buyer, and is accompanied by a written disclosure of Buyer’s prior rejection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall furnished under the applicable Purchase Order will be subject to Buyer’s right final inspection and approval at Buyer’s premises within a reasonable time after delivery, irrespective of inspectionpayment date. Buyer shall have fifteen (15) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon Upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications specifications of the applicable Purchase Order or any term of this Agreement. Buyer’s T&C. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period Seller notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect SupplierSeller’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the return rejected Goods to Seller at the SupplierSeller’s expense and riskrisk of loss for, at Xxxxx’s option, either: (i) full credit or refund of all amounts paid by Buyer to Seller for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Supplier Title to rejected Goods that are returned to Seller shall transfer to Seller upon such delivery and such Goods shall not be replaced by Seller except upon written instructions from Xxxxx. Seller shall not deliver Goods that were previously rejected on grounds of non-compliance with this AgreementXxxxx’s T&C, unless delivery of such Goods is approved in advance in writing by BuyerXxxxx, and is accompanied by a written disclosure of BuyerXxxxx’s prior rejection(s). Buyer reserves the right to have a representative (either Buyer’s personnel or contracted personnel) in Seller’s facilities to inspect any material covered by the applicable Purchase Order at any reasonable time from the start of manufacturing until final shipment of conforming Goods. Buyer and its designees shall have the right to audit and inspect Seller and Seller’s suppliers’ records and facilities to determine Seller’s and its supplier’s compliance with the Purchase Order. c. Regardless of delivery terms, title to and risk of loss of the Goods under the applicable Purchase Order shall not pass to Buyer until Xxxxx's receipt and acceptance of the Goods. Any damage to Goods caused during transit shall be repaired or replaced at Seller’s sole cost and expense. d. Buyer is not obligated to any minimum purchase or future purchase obligations under this Order. Forecasts, estimates and similar projections of Buyer are not purchase commitments.

INSPECTION, ACCEPTANCE AND REJECTION. a. 2.1. All shipments of Goods and performance of Services shall be subject to BuyerMagnetic Group’s right of inspection. Buyer Magnetic Group shall have fifteen thirty (1530) days (the “Inspection Period“”) following the delivery of the Goods at the Delivery Point or performance of the Services to Magnetic Group to undertake such inspectioninspec- tion, and upon such inspection Buyer Magnetic Group shall either accept the Goods or Services (“Acceptance“”) or reject them. Buyer Mag- netic Group shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged dam- aged or defective. In addition, Buyer Magnetic Group shall have the right to reject any Goods or Services that are not in conformance with the Specifications Purchase Order or any term of this Agreement. Transfer of title to Buyer Magnetic Group of Goods shall not constitute Buyercon- stitute Magnetic Group’s Acceptance of those Goods. Buyer Magnetic Group shall provide Supplier within the Inspection Period notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer Magnetic Group does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer Magnetic Group will be deemed to have provided Acceptance of such Goods or ServicesGoods. BuyerMagnetic Group’s inspection, testing, or Acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods or ServicesGoods, and such warranties shall survive inspection, test, Acceptance and use of the Goods or ServicesGoods. b. Buyer 2.2. Magnetic Group shall be entitled to request replacement or repair of the return rejected Goods to Supplier at the Supplier’s expense and riskrisk of loss for, at Magnetic Group’s option, either: (i) full credit or refund of all amounts paid by Magnetic Group to Supplier for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Magnetic Group. Title to rejected Goods that are returned to Supplier shall transfer to Supplier upon such delivery and such Goods shall not be replaced by Supplier except upon written instructions from Magnetic Group. Supplier shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, unless delivery of such Goods is approved in advance by BuyerMagnetic Group, and is accompanied by a written disclosure of BuyerMagnetic Group’s prior rejection(sre- jection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall furnished under the applicable Purchase Order will be subject to Buyer’s right final inspection and approval at Buyer’s premises within a reasonable time after delivery, irrespective of inspectionpayment date. Buyer shall have fifteen (15) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon Upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications specifications of the applicable Purchase Order or any term of this Agreement. Buyer’s T&C. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period Seller notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect SupplierSeller’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the return rejected Goods to Seller at the SupplierSeller’s expense and riskrisk of loss for, at Buyer’s option, either: (i) full credit or refund of all amounts paid by Buyer to Seller for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Supplier Title to rejected Goods that are returned to Seller shall transfer to Seller upon such delivery and such Goods shall not be replaced by Seller except upon written instructions from Buyer. Seller shall not deliver Goods that were previously rejected on grounds of non-compliance with this AgreementBuyer’s T&C, unless delivery of such Goods is approved in advance by Buyer, and is accompanied by a written disclosure of Buyer’s prior rejection(s). Buyer reserves the right to have a representative (either Buyer’s personnel or contracted personnel) in Seller’s facilities to inspect any material covered by the applicable Purchase Order at any reasonable time from the start of manufacturing until final shipment of conforming Goods.

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services Associated Services, if applicable, shall be subject to Buyerthe Purchaser’s right of inspection. Buyer The Purchaser shall have fifteen sixty (1560) calendar days (the “Inspection Period“”) following the delivery of the Goods at the Delivery Point Location or performance of the Services Associated Services, if applicable, to undertake such inspection, and upon such inspection Buyer the Purchaser shall either accept the Goods or Associated Services (“Acceptance“”) or reject them. Buyer The Purchaser shall have the right to reject any Goods that are delivered are: i. Delivered in excess of the quantity ordered or are damaged ordered; ii. Damaged or defective; iii. In addition, Buyer shall have Counterfeit; iv. Short of the right to reject any Goods or Services that are not quantity ordered; are v. Not in conformance with the Specifications requirements set out in Appendix A [Goods and Associated Services] to the CSA, the COP, or any term of this Agreement. the Quotation and Order Form. b. Transfer of title to Buyer the Purchaser of Goods shall not constitute Buyerthe Purchaser’s Acceptance of those Goods. Buyer The Purchaser shall provide Supplier the Contractor within the Inspection Period notice of any Goods or Associated Services that are rejected, together with the reasons for such rejection. If Buyer the Purchaser does not provide Supplier the Contractor with any notice of rejection within the Inspection Period, then Buyer the Purchaser will be deemed to have provided Acceptance of such Goods or Associated Services. BuyerThe Purchaser’s inspection, testing, or Acceptance or use of the Goods or Associated Services hereunder shall not limit or otherwise affect Supplierthe Contractor’s warranty obligations hereunder with respect to the Goods or Associated Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Associated Services. b. Buyer c. The Purchaser shall be entitled to request replacement or repair of return rejected Goods to the Goods Contractor at the SupplierContractor’s expense and riskrisk of loss for, at the Purchaser’s option, either: (i) full credit or refund of all amounts paid by the Purchaser to the Contractor for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by the Purchaser. Supplier Title to rejected Goods that are returned to the Contractor shall transfer to the Contractor upon such delivery and such Goods shall not be replaced by the Contractor except upon written instructions from the Purchaser. The Contractor shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, Order unless delivery of such Goods is approved in advance writing by Buyerthe Purchaser in advance. d. Notwithstanding the Purchaser having received possession of the Goods and without limiting the Purchaser’s rights in section 4, the Purchaser will not have accepted the Goods until the Purchaser ’s Qualified Receiver (as defined in the Purchaser’s Core Policy and is accompanied by a written disclosure Procedures Manual) has completed the steps assigned to the Qualified Receiver set out in c. 4.3.2 of Buyerthe Purchaser’s prior rejection(s)Core Policy and Procedures Manual. e. In addition to the foregoing provisions of this section 4, at the request of the Purchaser, the Contractor will enter into an amendment of the Order with the Purchaser to reflect any of the circumstances set out in this section 4.

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services shall be subject to Buyer’s right of inspection. Buyer shall have fifteen ninety (1590) days (the “Inspection Period“) following the delivery of the Goods at the Delivery Point or performance of the Services to undertake such inspection, and upon such inspection Buyer shall either accept the Goods or Services (“Acceptance“) or reject them. Buyer shall have the right to reject any Goods that are delivered in excess of the quantity ordered or are damaged or defective. In addition, Buyer shall have the right to reject any Goods or Services that are not in conformance with the Specifications or any term of this Agreement. Transfer of title to Buyer of Goods shall not constitute Buyer’s Acceptance of those Goods. Buyer shall provide Supplier within the Inspection Period notice of any Goods or Services that are rejected, together with the reasons for such rejection. If Buyer does not provide Supplier with any notice of rejection within the Inspection Period, then Buyer will be deemed to have provided Acceptance of such Goods or Services. Buyer’s inspection, testing, or Acceptance or use of the Goods or Services hereunder shall not limit or otherwise affect Supplier’s warranty obligations hereunder with respect to the Goods or Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Services. b. Buyer shall be entitled to request replacement or repair of the return rejected Goods to Supplier at the Supplier’s expense and riskrisk of loss for, at Buyer’s option, either: (i) full credit or refund of all amounts paid by Buyer to Supplier for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by Buyer. Title to rejected Goods that are returned to Supplier shall transfer to Supplier upon such delivery and such Goods shall not be replaced by Supplier except upon written instructions from Buyer. Supplier shall not deliver Goods that were previously rejected on grounds of non-compliance with this Agreement, unless delivery of such Goods is approved in advance by Buyer, Buyer and is accompanied by a written disclosure of BuyerXxxxx’s prior rejection(s).

INSPECTION, ACCEPTANCE AND REJECTION. a. All shipments of Goods and performance of Services Associated Services, if applicable, shall be subject to Buyerthe Purchaser’s right of inspection. Buyer The Purchaser shall have fifteen sixty (1560) calendar days (the “Inspection Period“”) following the delivery of the Goods at the Delivery Point Location or performance of the Services Associated Services, if applicable, to undertake such inspection, and upon such inspection Buyer the Purchaser shall either accept the Goods or Associated Services (“Acceptance“”) or reject them. Buyer The Purchaser shall have the right to reject any Goods that are are: i. delivered in excess of the quantity ordered or are ordered; ii. damaged or defective; iii. In addition, Buyer shall have counterfeit; iv. short of the right to reject any Goods or Services that quantity ordered; or v. are not in conformance with the Specifications requirements or any term of this Agreement. set out in the Executed Purchase Request or these Order Terms and Conditions. b. Transfer of title to Buyer the Purchaser of Goods shall not constitute Buyerthe Purchaser’s Acceptance of those Goods. Buyer The Purchaser shall provide Supplier the Contractor within the Inspection Period notice of any Goods or Associated Services that are rejected, together with the reasons for such rejection. If Buyer the Purchaser does not provide Supplier the Contractor with any notice of rejection within the Inspection Period, then Buyer the Purchaser will be deemed to have provided Acceptance of such Goods or Associated Services. BuyerThe Purchaser’s inspection, testing, or Acceptance or use of the Goods or Associated Services hereunder shall not limit or otherwise affect Supplierthe Contractor’s warranty obligations hereunder with respect to the Goods or Associated Services, and such warranties shall survive inspection, test, Acceptance and use of the Goods or Associated Services. b. Buyer c. The Purchaser shall be entitled to request replacement or repair of return rejected Goods to the Goods Contractor at the SupplierContractor’s expense and riskrisk of loss for, at the Purchaser’s option, either: (i) full credit or refund of all amounts paid by the Purchaser to the Contractor for the rejected Goods; or (ii) replacement Goods to be received within the time period specified by the Purchaser. Supplier Title to rejected Goods that are returned to the Contractor shall transfer to the Contractor upon such delivery and such Goods shall not be replaced by the Contractor except upon written instructions from the Purchaser. The Contractor shall not deliver Goods that were previously rejected on grounds of non-compliance with this AgreementOrder, unless delivery of such Goods is approved in advance writing by Buyerthe Purchaser in advance. d. Notwithstanding the Purchaser having received possession of the Goods and without limiting the Purchaser’s rights in section 4, the Purchaser will not have accepted the Goods until the Purchaser ’s Qualified Receiver (as defined in the Purchaser’s Core Policy and is accompanied by a written disclosure Procedures Manual) has completed the steps assigned to the Qualified Receiver set out in c. 4.3.2 of Buyerthe Purchaser’s prior rejection(s)Core Policy and Procedures Manual. e. In addition to the foregoing provisions of this section 4, at the request of the Purchaser, the Contractor will enter into an amendment of the Order with the Purchaser to reflect any of the circumstances set out in this section 4.