Common use of Inspection and Testing Clause in Contracts

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer Xxxxx in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon BuyerXxxxx’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition Clause 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition Clause 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Within a reasonable period following delivery, Buyer shall inspect the Goods for compliance with quantity, type ordered, visible transport damages or any other visible defects. Buyer shall have no further investigation obligations regarding the Goods. 9.2. In the event acceptance is legally stipulated or contractually agreed Buyer shall be entitled to refuse such acceptance and withhold any payment associated with such if the Services and/or Deliverables are not delivered in full or without defect. The same applies in the event of an agreed acceptance date or a deadline set by Seller to Buyer. 9.3. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services and/or Deliverables as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.29.4. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.39.5. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliancecompliance with such warranties. 9.49.6. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by BuyerContract. 9.59.7. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production processprocess of Buyer. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing.. Synthomer Specialty Resins S.r.l, registered office at Xxx Xxxxxxx 00, 00000 Xxxx’Xxxxxx Xxxxx CN, incorporated in Italy under company number 04484050960 Version 3 – April 20 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance.. Synthomer (Thailand) Limited having its registered Office at No. 000/00, Xxx 0, Xxxxxx Xxxxx, Xxxxxx Xxxxxxxx, Xxxxxxxx 00000 Xxxxxxxx. Version 3 – April 2020 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing.. Synthomer S.r.l, registered office at Xxx xxxxx Xxxxxxxxx 0, 00000 Xxxxxx (XX), incorporated in Italy under company number 11966450154 Version 3 – April 2020 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing.. Synthomer Asua, S.L., Camino de Sangroniz, 8. 48150 Sondika, Vizcaya, Spain with Tax Identification Number CIF X-00000000 Version 3 – April 2020 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer Xxxxx in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon BuyerXxxxx’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance.. Synthomer (Thailand) Limited having its registered Office at No. 000/00, Xxx 0, Xxxxxx Xxxxx, Xxxxxx Xxxxxxxx, Xxxxxxxx 00000 Xxxxxxxx. Version 2 – October 2019 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third Synthomer S.r.l, registered office at Xxx xxxxx Xxxxxxxxx 0, 00000 Xxxxxx (XX), incorporated in Italy under company number 11966450154 Version September 2021 party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Within a reasonable period following delivery, Buyer shall inspect the Goods for compliance with quantity, type ordered, visible transport damages or any other visible defects. Buyer shall have no further investigation obligations regarding the Goods. 9.2. In the event acceptance is legally stipulated or contractually agreed Buyer shall be entitled to refuse such acceptance and withhold any payment associated with such if the Services and/or Deliverables are not delivered in full or without defect. The same applies in the event of an agreed acceptance date or a deadline set by Seller to Buyer. 9.3. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services and/or Deliverables as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.29.4. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.39.5. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.49.6. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by BuyerContract. 9.59.7. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production processprocess of Buyer. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition Article 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition Article 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer Xxxxx in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon BuyerXxxxx’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing.. Synthomer Trading Limited having its registered Office at 00 Xxxx Xxxx, Xxxxxx, Xxxxxx Xxxxxxx, XX0X 0XX - Registered in England No. 10126402 Version January 2022 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition Clause 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition Clause 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer Xxxxx in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon BuyerXxxxx’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third Synthomer Specialty Resins S.r.l, registered office at Xxx Xxxxxxx 00, 00000 Xxxx’Xxxxxx Xxxxx CN, incorporated in Italy company number 04484050960 Version September 2021 party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon Buyer’s request.

Inspection and Testing. 9.1. Buyer will not be deemed to have accepted the Goods and/or Services and/or Deliverables until it has had a reasonable period to inspect them following delivery of the Goods and/or Deliverables or completion of performance of the Services. Buyer will also have the right to reject the Goods and/or Services as though they had not been accepted, after any latent defect in the Goods and/or Services and/or Deliverables has become apparent. 9.2. Buyer (including its employees, affiliates, agents and other representatives) will be permitted to inspect and test the Goods and any goods and materials to be used for the purposes of the Contract at any time prior to delivery (including during manufacture, processing, storage, loading and unloading, whether at the premises of Seller or any third party) and Seller will provide Buyer with all facilities reasonably required for such inspection and testing. 9.3. If following such inspection and/or testing Buyer considers that the Goods and/or Services and/or Deliverables do not conform or are unlikely to conform with the warranties set out in Condition Clause 5, Buyer will inform Seller and Seller will immediately take such remedial action as is necessary to ensure compliance. 9.4. Any inspection or testing carried out by Buyer under this Condition Clause 9, will not release Seller from its liability to properly perform its obligations under the Contract nor does such inspection or testing imply acceptance of the Goods and/or Services and/or Deliverables by Buyer. 9.5. Seller will inform Buyer Xxxxx in good time and in writing of any intended changes in (a) the production process or the raw materials used in the production of the Goods, (b) the equipment used for testing the Goods and/or (c) the quality assurance measures normally applied, so that Buyer can evaluate the potential effects of these changes on the Goods to be delivered and/or the further production process. Seller agrees to the implementation of a joint quality audit upon BuyerXxxxx’s request.