Joints General Sample Clauses

Joints General. Joints between old and new pavements or between successive day’s work shall be cut back vertical with a saw. Other joints shall be sawed vertical as directed by the City Engineer. All joints shall be tacked and shall be made carefully to insure continuous bond between old and new sections of the course. All joints shall have the same texture, density, and smoothness as other sections of the course. The tack shall be overlapped onto the previous pavement 1 inch to 2 inches. Contact surfaces of previously constructed pavements, curbs, gutters, manholes, etc., shall be tacked. Surfaces that have become coated with dust, sand, or other objectionable material shall be cleaned by brushing or cut back with an approved power saw, as directed. The surface against which new material is to be placed shall be sprayed with a thin, uniform coat of bituminous material conforming to the requirements of paragraph TACK COAT stated hereinafter. The material shall be applied far enough in advance of placement of the fresh mixture to insure adequate curing. Care shall be taken to prevent damage or contamination of the sprayed surface.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Joints General. Joints between old and new pavements or between successive day’s work shall be cut back vertical with a saw. Other joints shall be sawed vertical as directed by the City Engineer. All joints shall be tacked and shall be made carefully to insure continuous bond between old and new sections of the course. All joints shall have the same texture, density, and smoothness as other sections of the course. The tack shall be overlapped onto the previous pavement 1 inch to 2 inches. Contact surfaces of previously constructed pavements, curbs, gutters, manholes, etc., shall be tacked. Surfaces that have become coated with dust, sand, or other objectionable material shall be cleaned by brushing or cut back with an approved power saw, as directed. The surface against which new material is to be placed shall be sprayed with a thin, uniform coat of bituminous material conforming to the requirements of paragraph “Tack Coat”. The material shall be applied far enough in advance of placement of the fresh mixture to insure adequate curing. Care shall be taken to prevent damage or contamination of the sprayed surface. Edges of previously placed pavement that have cooled and are irregular, honeycombed, poorly compacted, damaged, or otherwise defective unsatisfactory sections shall be cut back to expose a clean, sound surface for the full thickness of the course as directed by the City Engineer.
Sample 1

Related to Joints General

  • Increased Costs Generally If any Change in Law shall:

  • Terms Generally The definitions of terms herein shall apply equally to the singular and plural forms of the terms defined. Whenever the context may require, any pronoun shall include the corresponding masculine, feminine and neuter forms. The words “include”, “includes” and “including” shall be deemed to be followed by the phrase “without limitation”. The word “will” shall be construed to have the same meaning and effect as the word “shall”. Unless the context requires otherwise (a) any definition of or reference to any agreement, instrument or other document herein shall be construed as referring to such agreement, instrument or other document as from time to time amended, supplemented or otherwise modified (subject to any restrictions on such amendments, supplements or modifications set forth herein), (b) any reference herein to any Person shall be construed to include such Person’s successors and assigns, (c) the words “herein”, “hereof” and “hereunder”, and words of similar import, shall be construed to refer to this Agreement in its entirety and not to any particular provision hereof, (d) all references herein to Articles, Sections, Exhibits and Schedules shall be construed to refer to Articles and Sections of, and Exhibits and Schedules to, this Agreement and (e) the words “asset” and “property” shall be construed to have the same meaning and effect and to refer to any and all tangible and intangible assets and properties, including cash, securities, accounts and contract rights.

  • Contractor’s General Responsibilities The Contractor, regardless of any delegation or subcontract entered by the Contractor, shall be responsible for the following when providing information technology staff augmentation services:

Time is Money Join Law Insider Premium to draft better contracts faster.