Delivery of Products 4.1 The Supplier shall ensure that: (a) Products are properly packed and secured in such manner as to enable them to reach their destination in good condition; (b) each delivery of Products is accompanied by a delivery note which shows the date of the Order, the Order number (if any), the type and quantity of Products (including the code number of the Products, where applicable), special storage instructions (if any) and, if the Products are being delivered in instalments, the outstanding balance of Products remaining to be delivered; and (c) it states clearly on the delivery note any requirement for Ornua to return any packaging material for the Products to the Supplier. Any such packaging material shall only be returned to the Supplier at the cost of the Supplier. 4.2 The Supplier shall deliver the Products: (a) to the location set out in the Order or such other location as the parties may agree which may include delivery to a carrier (Delivery Location); and (b) on the date specified in the Order or, if no such date is specified, on a date agreed with Ornua in advance (Delivery Date). Delivery shall be on a Business Day during normal business hours, unless agreed otherwise with Ornua or otherwise instructed by Ornua. 4.3 Delivery of Products shall be completed when the Supplier unloads and stacks the Products at the Delivery Location, unless different delivery terms (or Incoterms®) are specified in the Order. 4.4 Ornua operates a “Just-in-Time” delivery system. Time shall be of the essence in relation to the Delivery Date and any agreed delivery time. If the Products are not delivered on time by the Supplier, clause 6.1 shall apply. 4.5 If the Supplier delivers more that the quantity of Products ordered, Ornua shall not be bound to pay for the excess and any excess shall be and shall remain at the Supplier’s risk and shall be returnable at the Supplier’s expense. 4.6 The Supplier shall not deliver Products in instalments without Ornua's prior written consent. Where it is agreed that Products are to be delivered in instalments, they may be invoiced and paid for separately. Failure by the Supplier to deliver any one instalment on time or at all or any defect in an instalment shall entitle Ornua to the remedies set out in clause 6.1. 4.7 Title and risk in the Products shall pass to Ornua on completion of delivery.
Delivery of Product 11.1 Subject to Clause 25 (Capacity Constraints), GSK (or the Nominated Supplier) shall Deliver the Products on the date specified in the relevant Firm Order, provided that: (A) the quantity of Product Delivered by GSK may vary by [***] from the quantity specified in the relevant Firm Order; and (B) the date of Delivery may vary by [***] from the date specified in the relevant Firm Order, and such variance shall not constitute a breach of this Agreement by GSK or entitle the Purchaser to reject such Delivery. Delivery of Commercial API and Commercial Products shall take place following release by GSK of such Products in accordance with (and the extent required by) the Quality Agreement, provided that, for clarity, the Purchaser shall only be required to pay for the quantity of Product that is actually Delivered. 11.2 In respect of Commercial API, the Parties may agree that some or all of the quantities of such Commercial API Delivered pursuant to Clause 11.1 shall remain in the possession of GSK or its Affiliate on [***]. The Purchaser shall pay GSK a storage fee to cover any GSK costs and expenses incurred in connection with holding and storing such [***] stock (“Storage Fee”). The Storage Fee is set forth in Schedule 4 (Fees). For the avoidance of doubt, no Storage Fee is payable in respect of quantities of Commercial API required for the Manufacture of the Commercial Product shown in the Firm Zone and that are held by GSK at designated Manufacturing Site in respect of Commercial Product for the purposes of such Manufacture. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE DERMAVANT SCIENCES LTD. HAS DETERMINED THE INFORMATION (I) IS NOT MATERIAL AND (II) WOULD LIKELY CAUSE COMPETITIVE HARM TO DERMAVANT SCIENCES LTD. IF PUBLICLY DISCLOSED. 11.3 Subject to paragraph 2 of Schedule 3 (Toll Manufacturing Provisions), the risk in and title to the Commercial Products shall remain with GSK (or its Affiliate) until Delivered, at which point it shall pass to the Purchaser. Title to Commercial API shall pass to the Purchaser when such Commercial API is purchased by Purchaser, but risk in such Commercial API shall remain with GSK in accordance with Clause 8.5 for so long as such Commercial API is in GSK’s possession as Purchaser Materials. 11.4 Other than in respect of Commercial API that the Parties agree shall be retained by GSK on Consignment, the Purchaser shall collect the Products Delivered from the Manufacturing Site on the date of Delivery, or such date as GSK, the Nominated Supplier or the Nominated Manufacturer may notify to the Purchaser (provided that, and if the Delivery date notified to the Purchaser is earlier or later than the Delivery window contemplated by Clause 11.1, the Delivery date must be agreed with the Purchaser). Notwithstanding the foregoing, and without limiting Clause 20.2, Purchaser may, [***], elect to obtain Delivery at any point within [***] of the notified date of Delivery by providing notice to GSK of such revised Delivery date. 11.5 Commercial API that the Parties agree shall be retained by GSK [***] at the Manufacturing Site in respect of Commercial API shall be collected by the Purchaser from such Manufacturing Site on such date as may be agreed between the Parties. 11.6 For the avoidance of doubt, irrespective of whether or not any quantity of Commercial API is retained by GSK [***] for a period of time after Delivery, the Purchaser shall be responsible for the delivery of Toll Materials to the designated Manufacturing Site in respect of Commercial Product.
PRODUCT DELIVERY Delivery must be made as ordered to the address specified on the Purchase Order and in accordance with the terms of the Contract. Delivery shall be made within thirty calendar days after receipt of a Purchase Order by the Contractor, unless otherwise agreed to by the Authorized User and the Contractor. The decision of the Commissioner as to compliance with delivery terms shall be final. The burden of proof for delay in receipt of a Purchase Order shall rest with the Contractor. In all instances of a potential or actual delay in delivery, the Contractor shall immediately notify the Commissioner and the Authorized User, and confirm in writing the explanation of the delay, and take appropriate action to avoid any subsequent late deliveries. Any extension of time for delivery must be requested in writing by the Contractor and approved in writing by the Authorized User. Failure to meet such delivery time schedule may be grounds for cancellation of the order or, in the Commissioner’s discretion, the Contract.
Project Delivery Order Procedures Status of TIPS Members as Related to This Agreement
PRODUCT DELIVERY Delivery must be made as ordered to the address specified on the Purchase Order and in accordance with the terms of the Contract or Contract Award Notice. Unless otherwise specified in the Bid Documents, delivery shall be made within thirty calendar days after receipt of a Purchase Order by the Contractor. The decision of the Commissioner as to compliance with delivery terms shall be final. The burden of proof for delay in receipt of Purchase Order shall rest with the Contractor. In all instances of a potential or actual delay in delivery, the Contractor shall immediately notify the Commissioner and the Authorized User, and confirm in writing the explanation of the delay, and take appropriate action to avoid any subsequent late deliveries. Any extension of time for delivery must be requested in writing by the Contractor and approved in writing by the Authorized User. Failure to meet such delivery time schedule may be grounds for cancellation of the order or, in the Commissioner’s discretion, the Contract.
Delivery of Materials In the event of any expiration or termination of this Agreement, Contractor shall promptly provide the JBE with all originals and copies of the Deliverables, including any partially-completed Deliverables-related work product or materials, and any JBE-provided materials in its possession, custody, or control. In the event of any termination of this Agreement, the JBE shall not be liable to Contractor for compensation or damages incurred as a result of such termination; provided that if the JBE’s termination is not for cause, the JBE shall pay any fees due under this Agreement for Services performed or Deliverables completed and accepted as of the date of the JBE’s termination Notice.
Project Delivery Order Procedures The TIPS Member having approved and signed an interlocal agreement, or other TIPS Membership document, may make a request of the awarded vendor under this Agreement when the TIPS Member has services that need to be undertaken. Notification may occur via phone, the web, email, fax, or in person. Upon notification of a pending request, the awarded vendor shall make contact with the TIPS Member as soon as possible, but must make contact with the TIPS Member within two working days. Scheduling of projects (if applicable) may be accomplished when the TIPS Member issues a Purchase Order and/or an Agreement or Contract that will serve as “the notice to proceed” as agreed by the Vendor and the TIPS Member. The period for the delivery order will include the mobilization, materials purchase, installation and delivery, design, weather, and site cleanup and inspection. No additional claims may be made for delays as a result of these items. When the tasks have been completed the awarded vendor shall notify the client and have the TIPS Member or a designated representative of the TIPS Member inspect the work for acceptance under the scope and terms in the Purchase Order and/or Agreement or Contract. The TIPS Member will issue in writing any corrective actions that are required. Upon completion of these items, the TIPS Member will issue a completion notice and final payment will be issued per the contractual requirements of the project with the TIPS Member. Any Construction contract prepared by the TIPS Member’s Legal Counsel may alter the terms of this subsection, “Scheduling of Projects”.
Delivery of Materials to Underwriters The Company will deliver to each of the several Underwriters, without charge and from time to time during the period when a prospectus is required to be delivered under the Act or the Exchange Act, such number of copies of each Statutory Prospectus, the Prospectus and all amendments and supplements to such documents as such Underwriters may reasonably request.
Acceptance of Deliverables The State’s Project Manager shall be responsible for the sign-off acceptance of all Deliverables required and performed/submitted pursuant to this Agreement. Upon successful completion of a Deliverable, Contractor shall provide the State’s Project Manager with a completed Acceptance and Signoff Form (Exhibit E). The State’s Project Manager will apply the standards established in Exhibit D and the acceptance criteria set forth in subparagraph B of this article, as appropriate, to determine the acceptability of the Deliverable provided by Contractor. If the State’s Project Manager rejects the Deliverable, the parties agree to any dispute(s) resulting from such rejection(s) will be resolved as set forth in this article. Acceptance Criteria for Deliverables (“Criteria”) provided by Contractor pursuant to this Agreement include: Timeliness: The Work was provided on time; according to schedule; Completeness: The Deliverable contained all of the, Data, Materials, and features required by the Agreement; and Technical accuracy: The Deliverable complied with the standards of this Agreement, or, if this Agreement lacks a standard for provision of the Work, the currently generally accepted industry standard. Contractor shall provide the Deliverable to the State, in accordance with direction from the Project Manager and as provided for in Exhibit D. The State shall accept the Deliverable, provided that Contractor has delivered the Deliverable in accordance with the Criteria. The State’s Project Manager shall assign the Acceptance and Signoff Form to notify Contractor of the Deliverable’s acceptability. If the State rejects the Deliverable provided, the State’s Project Manager shall submit to Contractor’s Project Manager a written rejection describing in detail the failure of the Deliverable as measured against the Criteria. If the State rejects the Deliverable, then Contractor shall have a period of ten (10) Business Days from receipt of the Notice of rejection to correct the stated failure(s) to conform to the Criteria.
