Scope and Limitations of Agreement 1.1 This Agreement shall be used for all Interconnection Requests submitted under the Small Generator Interconnection Procedures (SGIP) except for those submitted under the 10 kW Inverter Process contained in SGIP Attachment 5.
1.2 This Agreement governs the terms and conditions under which the Interconnection Customer’s Small Generating Facility will interconnect with, and operate in parallel with, the Transmission Provider's Transmission System.
1.3 This Agreement does not constitute an agreement to purchase or deliver the Interconnection Customer's power. The purchase or delivery of power and other services that the Interconnection Customer may require will be covered under separate agreements, if any. The Interconnection Customer will be responsible for separately making all necessary arrangements (including scheduling) for delivery of electricity with the applicable Transmission Provider.
1.4 Nothing in this Agreement is intended to affect any other agreement between the Transmission Provider and the Interconnection Customer.
General Conditions Costs Contractor is entitled to receive payment for the actual cost of the allowable General Conditions items incurred after receipt of a Notice to Proceed with Construction from Owner through Substantial Completion of the Project, plus 30 calendar days. Contractor is not entitled to reimbursement for General Conditions Costs incurred before receipt of the Notice to Proceed. General Conditions Costs incurred after Substantial Completion, plus 30 calendar days, must be approved in advance by Owner. Allowable General Conditions items are identified below and in Exhibit “D” attached to this Agreement. These items shall be included in the General Conditions Cost amount shown as a line item in the Guaranteed Maximum Price Proposal and as detailed on the Schedule of Values. Items not specifically included below or in Exhibit “D” will not be allowed as General Condition Costs.
Regulatory and Special Allocations Notwithstanding the provisions of Section 6.1:
(a) If there is a net decrease in Company Minimum Gain (determined according to Treasury Regulations Section 1.704-2(d)(1)) during any Fiscal Year, each Member shall be specially allocated income and gain for such Fiscal Year (and, if necessary, subsequent Fiscal Years) in an amount equal to such Member’s share of the net decrease in Company Minimum Gain, determined in accordance with Treasury Regulations Section 1.704-2(g). The items to be so allocated shall be determined in accordance with Treasury Regulations Sections 1.704-2(f)(6) and 1.704-2(j)(2). This Section 6.2(a) is intended to comply with the “minimum gain chargeback” requirement in Treasury Regulation Section 1.704-2(f) and shall be interpreted consistently therewith.
(b) Member Nonrecourse Deductions shall be allocated in the manner required by Treasury Regulations Section 1.704-2(i). Except as otherwise provided in Treasury Regulations Section 1.704-2(i)(4), if there is a net decrease in Member Nonrecourse Debt Minimum Gain during any Fiscal Year, each Member that has a share of such Member Nonrecourse Debt Minimum Gain shall be specially allocated income and gain for such Fiscal Year (and, if necessary, subsequent Fiscal Years) in an amount equal to that Member’s share of the net decrease in Member Nonrecourse Debt Minimum Gain. Items to be allocated pursuant to this paragraph shall be determined in accordance with Treasury Regulations Sections 1.704-2(i)(4) and 1.704-2(j)(2). This Section 6.2(b) is intended to comply with the “minimum gain chargeback” requirements in Treasury Regulations Section 1.704-2(i)(4) and shall be interpreted consistently therewith.
(c) In the event any Member unexpectedly receives any adjustments, allocations or Distributions described in Treasury Regulations Section 1.704-1(b)(2)(ii)(d)(4), (5) or (6), income and gain shall be specially allocated to such Member in an amount and manner sufficient to eliminate the Adjusted Capital Account Deficit created by such adjustments, allocations or Distributions as quickly as possible. This Section 6.2(c) is intended to comply with the qualified income offset requirement in Treasury Regulations Section 1.704-1(b)(2)(ii)(d) and shall be interpreted consistently therewith.
(d) The allocations set forth in paragraphs (a), (b) and (c) above (the “Regulatory Allocations”) are intended to comply with certain requirements of the Treasury Regulations under Code Section 704. Notwithstanding any other provisions of this Article VI (other than the Regulatory Allocations), the Regulatory Allocations shall be taken into account in allocating Net Income and Net Losses among Members so that, to the extent possible, the net amount of such allocations of Net Income and Net Losses and other items and the Regulatory Allocations to each Member shall be equal to the net amount that would have been allocated to such Member if the Regulatory Allocations had not occurred.
(e) The Company and the Members acknowledge that allocations like those described in Proposed Treasury Regulation Section 1.704-1(b)(4)(xii)(c) (“Forfeiture Allocations”) result from the allocations of Net Income and Net Loss provided for in this Agreement. For the avoidance of doubt, the Company is entitled to make Forfeiture Allocations and, once required by applicable final or temporary guidance, allocations of Net Income and Net Loss shall be made in accordance with Proposed Treasury Regulation Section 1.704-1(b)(4)(xii)(c) or any successor provision or guidance.
Annual Budgets The School shall adopt a budget for each fiscal year, prior to the beginning of the fiscal year. The budget shall be in the Idaho Financial Accounting Reporting Management Systems (IFARMS) format and any other format as may be reasonably requested by the Authorizer.
Conditions of Advances The Banks and the Agent shall not be obligated to make any Advance hereunder at any time unless:
(a) On the Effective Date there shall have been delivered to each Bank the following documents, in form and substance satisfactory to the Agent and the following additional conditions shall have been satisfied:
(i) The favorable opinion of such counsel for the Borrowers as shall be approved by the Required Banks, with respect to the matters as requested by the Banks, all in form and substance satisfactory to the Required Banks;
(ii) certified copies of such corporate documents of each Borrower, including each Borrower's articles of incorporation, by-laws and a good standing certificate, and such documents evidencing necessary corporate action with respect to this Agreement, the Loans, the Notes and the Security Documents, and certifying to the incumbency of, and attesting to the genuineness of the signatures of, those officers authorized to act on behalf of each Borrower, as the Banks shall request;
(iii) the Security Documents required as of the Effective Date under Section 5.1 duly executed on behalf of the Borrowers, together with evidence of the recordation, filing and other action in such jurisdictions as the Banks may deem necessary or appropriate with respect to the Security Documents and evidence of the first-priority of the Banks' liens and security interests under the Security Documents, subject only to Permitted Liens, including without limitation such additional mortgages, security agreements, pledge agreements, other documents and opinions of counsel required by the Banks and original stock certificates and assignments separate from certificate of each Person whose stock is required to be pledged;
(iv) the Notes duly executed on behalf of the Borrowers, and it is acknowledged and agreed that the Notes: (A) are issued in exchange and replacement for the promissory notes issued pursuant to the Existing Credit Agreement, (B) shall not be deemed a novation or to have satisfied such promissory notes and (C) evidence the same indebtedness evidenced by such promissory notes plus additional indebtedness;
(v) the Consent and Amendment of Security Documents duly executed by the Borrowers;
(vi) Payment of such fees agreed to among the Borrowers and the Agent;
(vii) the execution by the Borrowers of the Agent's standard environmental certificate;
(viii) the Banks shall have determined that the Loans to be made are equal to or less than the Borrowing Base;
(ix) copies of all agreements relating to any material Indebtedness for borrowed money, any outstanding preferred stock, any joint ventures or partnerships or any other material documents requested by the Banks;
(x) the originals of all promissory notes payable to any Borrower, other than promissory notes in an aggregate amount less than $1,000,000;
(xi) such other agreements, documents, conditions and certificates as reasonably requested by the Banks, including without limitation, releases and terminations of all other Liens which are not permitted hereunder and amendments of existing Security Documents, all in form and substance satisfactory to the Banks.
(b) The aggregate outstanding principal amount of all Advances after giving effect to the proposed Advance, does not exceed the lesser of the Commitments or the Borrowing Base.
(c) On and as of the date of each such Advance, the representations and warranties contained in Section 6 hereof shall be true and correct in all material respects as if made on such date; provided, however, that for purposes of this Section 3.2(c) the representations and warranties contained in Section 6.7 hereof shall be deemed made with respect to both the financial statements referred to therein and the most recent financial statements delivered pursuant to Section 7.1(d)(ii) and (iii).
(d) No Default or event or condition which could cause a Material Adverse Effect has occurred and is continuing or will exist upon the disbursement of such Advance. Acceptance of the proceeds of any Advance hereunder by the Borrowers shall be deemed to be a certification by the Borrowers at such time with respect to the matters set forth in subparagraphs (b), (c) and (d) of this Section 3.2.
Limitation on Capital Expenditures Make or commit to make any Capital Expenditures except:
(a) Capital Expenditures made (or deemed made) with the proceeds of any Reinvestment Deferred Amount (including Capital Expenditures made during the six-month period prior to the relevant Reinvestment Event);
(b) Capital Expenditures in any Fiscal Year to finance the acquisition, construction or leasing of fixed or capital assets of the Borrower and its Class I Restricted Subsidiaries in the ordinary course of business not exceeding the Applicable Consolidated EBITDA Amount for such Fiscal Year; provided, that (x) such amounts referred to above, if not so expended in the Fiscal Year for which it is permitted, may be carried over for expenditure in the next succeeding Fiscal Year and (y) Capital Expenditures made pursuant to this paragraph (b) during any Fiscal Year shall be deemed made, first, in respect of amounts permitted for such Fiscal Year as provided above and, second, in respect of amounts carried over from the prior Fiscal Year pursuant to clause (x) above;
(c) to the extent that no amounts under Section 7.7(a) and (b) are available, Capital Expenditures to finance the acquisition, construction or leasing of fixed or capital assets in an amount not to exceed the Applicable Amount at the time of, and immediately prior to the making of, such Capital Expenditure; provided that, immediately prior to and after giving effect to such Capital Expenditure under this paragraph (c), no Default or Event of Default shall have occurred and be continuing; and
(d) notwithstanding anything in this Section 7.7 to the contrary, and without utilization of any amounts described in paragraphs (a) through (c) of this Section 7.7, purchases of digital projectors and other digital cinema equipment from or with DCIP.
GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site.
Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer.
Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations.
Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage.
Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer.
Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized.
Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel.
Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations.
Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job.
Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours.
Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement.
Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
Other Provisions of General Application Section 7.1 Notices to the Rights Agent, Parent and the Stockholders’ Representative. Any notice, request, instruction or other document to be given hereunder by any party to the others shall be in writing and delivered personally or sent by registered or certified mail, postage prepaid, by electronic mail (except with respect to the Rights Agent), by facsimile transmission only with respect to the Rights Agent or overnight courier, provided that with respect to notices deliverable to the Stockholders’ Representative, such notices shall be delivered solely via electronic mail or facsimile: If to Parent or the Company: Eros International Plc First Names House Victoria Road Xxxxxxx Isle of Man IM2 4DF British Isles Attention: Xxxx Xxxxxxx, Chief Corporate and Strategy Officer Email: xxxx.xxxxxxx@xxxxxxxx.xxx with a copy (which shall not constitute notice) to: Xxxxxx, Xxxx & Xxxxxxxx LLP 000 Xxxxx Xxxxx Xxxxxx Xxx Xxxxxxx, Xxxxxxxxxx 00000-0000 Attention: Xxxxx Xxxxxx Xxxxx Xxxxxx Email: xxxxxxx@xxxxxxxxxx.xxx xxxxxxx@xxxxxxxxxx.xxx If to the Rights Agent: Computershare Trust Company, N.A., Computershare Inc. 000 Xxxxxx Xxxxxx Canton, MA 02021 Attention: Client Services Facsimile: (000) 000-0000 If to the Stockholders’ Representative: Fortis Advisors LLC Attention: Notices Department (Project World Cup) Email: xxxxxxx@xxxxxxxxx.xxx Facsimile: (000) 000-0000 with a copy (which shall not constitute notice) to: Xxxxxxxx & Xxxxx LLP 000 Xxxxx Xxxxxx Xxxxxx, Xxxxx 0000 Xxx Xxxxxxx, Xxxxxxxxxx 00000 Attention: Xxxx X. Xxxxxx, P.C. Email: xxxx.xxxxxx@xxxxxxxx.xxx or to such other persons or addresses as may be designated in writing by the party to receive such notice as provided above. Any notice, request, instruction or other document given as provided above shall be deemed given to the receiving party upon actual receipt, if delivered personally; three (3) business days after deposit in the mail, if sent by registered or certified mail; upon confirmation of successful transmission if sent by electronic mail; or on the next business day after deposit with an overnight courier, if sent by an overnight courier.
OFFICE OF MANAGEMENT AND BUDGET (OMB) AUDIT REQUIREMENTS The parties shall comply with the requirements of the Single Audit Act of 1984, P.L. 98-502, ensuring that the single audit report includes the coverage stipulated in 2 CFR 200.
Annual Work Plans and Budgets The Recipient shall furnish to the Association as soon as available, but in any case not later than September 1 of each year, the annual work plan and budget for the Project for each subsequent year of Project implementation, of such scope and detail as the Association shall have reasonably requested, except for the annual work plan and budget for the Project for the first year of Project implementation, which shall be furnished no later than one (1) month after the Effective Date.
