Limited Version Sample Clauses

Limited Version. To the fullest extent permitted by law, contractor shall indemnify, defend and hold harmless the state, agencies of the state and all officials, agents and employees of the state, from and against all claims for injuries or death arising out of or resulting from the performance of the contract. Contractors’ obligations to indemnify, defend, and hold harmless includes any claim by contractors’ agents, employees, representatives or any subcontractor or its employees. Contractor expressly agrees to indemnify, defend, and hold harmless the state for any claim arising out of or incident to contractor's or any subcontractor's performance or failure to perform the contract. Contractor shall be required to indemnify, defend, and hold harmless the state, only to the extent claim is caused in whole or in part by negligent acts or omissions of contractor. Contractor waives its immunity under Title 51 RCW to the extent it is required to indemnify, defend and hold harmless state and its agencies, officials, agents or employees.
AutoNDA by SimpleDocs

Related to Limited Version

  • EXECUTION VERSION Amount would exceed the Post-Effective Limit, (ii) the Dealer Group would directly or indirectly so beneficially own in excess of the Threshold Number of Shares, (iii) Dealer would directly or indirectly hold in excess of the Exchange Limit, or (iv) such delivery would result in a violation of the Counterparty Stock Ownership Restriction. If any delivery owed to Dealer hereunder is not made, in whole or in part, as a result of this provision, Counterparty’s obligation to make such delivery shall not be extinguished and Counterparty shall make such delivery as promptly as practicable after, but in no event later than one Scheduled Trading Day after, Dealer gives notice to Counterparty that, after such delivery, (i) the Share Amount would not exceed the Post-Effective Limit, (ii) the Dealer Group would not directly or indirectly so beneficially own in excess of the Threshold Number of Shares, (iii) Dealer would not directly or indirectly hold in excess of the Exchange Limit, or (iv) such delivery would not result in a violation of the Counterparty Stock Ownership Restriction, as applicable. In addition, notwithstanding anything herein to the contrary, if any delivery owed to Dealer hereunder is not made, in whole or in part, as a result of the immediately preceding paragraph, Dealer shall be permitted to make any payment due in respect of such Shares to Counterparty in two or more tranches that correspond in amount to the number of Shares delivered by Counterparty to Dealer pursuant to the immediately preceding paragraph. Counterparty represents and warrants to, and agrees with Dealer that, ownership positions of Counterparty’s common stock held by Dealer or any of its affiliates solely in its capacity as a nominee or fiduciary (where Dealer and such affiliates have no economic interest in such positions) do not constitute “ownership” by Dealer, and Dealer shall not be deemed or treated as the beneficial or constructive “owner” of such positions, in each case, for purposes of Article VIII of the LLC Operating Agreement, except for purposes of Section 8.1(d) thereof, and Counterparty shall interpret the LLC Operating Agreement in accordance with the foregoing. Dealer represents and warrants that, as of the Trade Date, if Dealer received the maximum number of Shares hereunder assuming both (i) Physical Settlement applies and (ii) no restrictions on the delivery of Shares hereunder were applicable, then the Counterparty Stock Ownership Restriction would not apply so as to limit the number of Shares that Dealer could receive hereunder.

  • Commercial Driver’s License As a result of recent Federal statutory requirements, the State of Michigan enacted Act 346 of 1988. The parties agree that as a result of these statutory requirements some employees within the Technical Bargaining Unit may be required to obtain and retain a Commercial Drivers License (CDL) to continue to perform certain duties for the State. Whenever a CDL is referred to in this Section, it is understood to mean the CDL and any required endorsements. In order to implement this provision, the parties agree to the following: A. The Employer will reimburse the cost of obtaining and renewing the required CDL group license and endorsements for those employees in positions where such license and endorsements are required. B. The Employer will reimburse, on a one time basis, the fee for the skills test, if required, provided the skills test is not being required because of the employee's poor driving record. In that case, the employee is responsible for the cost of the skills test. Where a skills test is required, the employee will be permitted to utilize the appropriate state vehicle. C. Employees shall be eligible for one grant of administrative leave to take the test to obtain or renew the CDL. Should the employee fail the test initially, the employee shall complete the necessary requirements on non-work time. D. Employees reassigned to a position requiring a CDL shall be eligible for reimbursement and administrative leave in accordance with paragraphs 1, 2, and 3 of this Section. E. Employees desiring to transfer, promote, bump or be recalled to a position requiring a CDL are not eligible for reimbursement for obtaining the initial CDL but shall be eligible for reimbursement for renewals. F. Employees who fail to obtain, or retain, a CDL may be subject to removal from their positions. Employees who fail required tests may seek a 90 day extension of their current license, during which the Employer will retain the employee in his or her current or equivalent position. The Employer shall not be responsible for any fees associated with such extensions. At the end of the 90 day extension, if the employee fails to pass all required tests, the employee may be reassigned at the Employer's discretion, in accordance with applicable contractual provisions, to an available position not requiring a CDL for which the employee is qualified, or, if no position is available the employee will be laid off without bumping rights and will be placed on the Departmental Recall List, subject to recall in accordance with this Agreement. Those employees not choosing to extend their license for the 90 day period will be removed from their positions at the expiration of their current license and may be reassigned at the Employer's discretion, in accordance with applicable contractual provisions, to an available position not requiring a CDL for which the employee qualifies, or if no position is available, he or she will be laid off without bumping rights and will be placed on the Departmental Recall list. G. Employees required to obtain a medical certification of fitness shall have the "Examination to Determine Physical Condition of Drivers" form filed in their medical file. A copy of the medical "Examiners Certificate" shall be placed in their personnel file. The Employer agrees to pay for the examination and to grant administrative leave for the time necessary to complete the examination. The fitness standards for a CDL are unchanged from current Federal Department of Transportation Standards and Michigan Motor Carrier Standards. H. Employees who do not meet the required physical standards but who are otherwise qualified for a CDL may apply for a waiver to the Motor Carrier Appeal Board. I. Those employees employed by the State as intra-state drivers prior to June 10, 1984 shall be grandparented into the process and thereby be exempt from the medical certification requirement.

  • EXECUTION COPY Total Debt to Consolidated Total EBITDA Ratio as at the end of such fiscal year or period, as the case may be for the purpose of determining the Commitment Fee payable pursuant to Section 4.1(a); (iii) a specification of any change in the identity of the Restricted Subsidiaries, the Unrestricted Subsidiaries, the Specified Subsidiaries, the Immaterial Subsidiaries and the Foreign Subsidiaries as at the end of such fiscal year or period, as the case may be, from the Restricted Subsidiaries, the Unrestricted Subsidiaries, the Specified Subsidiaries, the Immaterial Subsidiaries and the Foreign Subsidiaries, respectively, provided to the Lenders on the Closing Date or the most recent fiscal year or period, as the case may be, (iv) the then applicable pricing level, (v) the calculations and basis, in reasonable detail, of any “run rate” cost savings added back to Consolidated EBITDA pursuant to the provisions of clause (a)(xi) of the definition thereof and (vi) the amount of any Pro Forma Adjustment not previously set forth in a Pro Forma Adjustment Certificate or any change in the amount of a Pro Forma Adjustment set forth in any Pro Forma Adjustment Certificate previously provided and, in either case in reasonable detail, the calculations and basis therefor. At the time of the delivery of the financial statements provided for in Section 9.1(a), a certificate of an Authorized Officer of the Borrower setting forth (i) in reasonable detail the calculation of the Available Amount and the Available Equity Amount as at the end of the fiscal year to which such financial statements relate and (ii) the information required pursuant to Section 2 of the Perfection Certificate or confirming that there has been no change in such information since the Closing Date or the date of the most recent certificate delivered pursuant to this Section 9.1(d), as the case may be.

  • Musculoskeletal Injury Prevention and Control The hospital in consultation with the Joint Health and Safety Committee (JHSC) shall develop, establish and put into effect, musculoskeletal prevention and control measures, procedures, practices and training for the health and safety of employees.

  • Agreement Xxx 0000 The Company shall not produce iron ore under this Agreement for transportation in any calendar year in excess of the approved production limit nor shall the total number of the mine workforce exceed the approved mine workforce without the prior consent in principle of the Minister and, subject to that consent, approval of detailed proposals in regard thereto in accordance with this Clause.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • Technology Research Analyst Job# 1810 General Characteristics

  • Rev If a tenant is denied assistance for this reason, the owner or managing agent must follow the procedures set out in the lease. Consent: I consent to allow HUD, the O/A, or the PHA to request and obtain income information from the federal and state agencies listed on the back of this form for the purpose of verifying my eligibility and level of benefits under HUD’s assisted housing programs. Agencies To Provide Information

  • Technology Transfer (a) Sublicensee acknowledges and agrees that ECC has delivered and made to Sublicensee a disclosure of a general introduction to the Technology and to its commercial feasibility prior to the execution of this Agreement. Except to the extent such information falls within one or more of the exceptions to the definition of "Confidential Information", all information disclosed by ECC to Sublicensee prior to the execution of this Agreement shall be deemed to constitute part of the Technology and shall be deemed to be confidential. The timing and extent of additional disclosure by ECC to Sublicensee shall be as set forth in subparagraph 22(b) hereof. (b) Upon execution of this Agreement, ECC shall provide Sublicensee with copies of the patents listed in Section B of Exhibit "B" hereto. Beyond that, ECC shall not be required to provide additional information concerning, or disclosure of, the Technology to Sublicensee until Sublicensee provides to ECC (i) written notice of Sublicensee's intent to commercialize a Product, which written notice shall include detailed specifications for the designated Product, and (ii) evidence, reasonably satisfactory to ECC, of Sublicensee's intent to commercialize the designated Product in the form of written documentation of orders placed by Sublicensee of the equipment needed by Sublicensee to produce and commercialize the designated Product or in the form of written documentation from Sublicensee confirming the dedication and/or modification of existing equipment necessary to produce the designated Product. Within ninety (90) days after ECC's receipt of the items described in the preceding sentence, ECC shall provide to Sublicensee the following additional disclosure: (w) a Product specific recipe for the production of the designated Product; (x) Product specific process specifications for the production of the designated Product; (y) copies of all patent applications listed in the Exhibits hereto that ECC deems relevant to the production of the designated Product; and (z) a list of known raw materials suppliers and preferred equipment vendors.

  • General Application The rules set forth below in this Article VI shall apply for the purposes of determining each Member’s allocable share of the items of income, gain, loss and expense of the Company comprising Net Income or Net Loss for each Fiscal Year, determining special allocations of other items of income, gain, loss and expense, and adjusting the balance of each Member’s Capital Account to reflect the aforementioned general and special allocations. For each Fiscal Year, the special allocations in Section 6.03 hereof shall be made immediately prior to the general allocations of Section 6.02 hereof.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!