Manufacture and Supply under the Millipore Agreement Sample Clauses

Manufacture and Supply under the Millipore Agreement. Without limiting the provisions of Section 2.1(f), Gen-Probe hereby reserves and retains all rights to the Gen-Probe Intellectual Property as necessary for Gen-Probe to continue to manufacture and supply Products (as defined in the Millipore Agreement) to Millipore until the date on which Company has fully assumed all such responsibilities relating to the manufacture and supply of Products (as defined in the Millipore Agreement) to Millipore, as set forth in that certain Consent Agreement, dated on or about the Effective Date, by and among Gen-Probe, Company and Millipore. Company hereby agrees that Company shall have fully assumed all such responsibilities relating to the manufacture and supply of Products (as defined in the Millipore Agreement) to Millipore no later than that date which is 18 months following the Effective Date.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs

Related to Manufacture and Supply under the Millipore Agreement

  • Manufacture and Supply As between the Parties, Otsuka shall be responsible for, shall bear all costs associated with, and shall have all decision-making authority over, all Manufacturing Activities (subject to discussion of CMC matters with Acucela through the JDC or applicable Operating Team as discussed below); provided, that Otsuka shall supply Licensed Product to Acucela or its permitted subcontractors for use in clinical trials conducted in accordance with each Development Plan and, if applicable, Commercialization Plan (i.e., Phase 3b Clinical Trials or Post-Approval Studies, if any), free of charge and in such quantities as are agreed by the JDC or the JCC (as applicable) or are otherwise required to seek or obtain Regulatory Approval. In addition, if and after Acucela exercises an Opt-In Right under Section 3.1, Otsuka shall supply promotional samples of Licensed Product to Acucela for use in its performance of Co-Promotion, in such quantities and on such terms as are determined by the JCC. The cost of promotional samples of Licensed Product, which shall be included in Commercialization Costs, shall be established by the JCC based on Otsuka’s per-unit cost to manufacture such promotional samples (but, for the avoidance of doubt, Otsuka shall have no obligation to disclose any information relating to its manufacturing costs), but in no event shall such promotional sample cost exceed * per promotional sample unless mutually agreed otherwise by the Parties. Acucela’s and its permitted subcontractors’ obligations to conduct Development activities, and upon Acucela’s exercise of its Opt-in Right pursuant to Section 3.1, to conduct Development and Commercialization activities, shall be expressly conditioned upon Otsuka fulfilling its Licensed Product supply obligations as set forth in the Development Plan or the Commercialization Plan, as applicable. To the extent that Otsuka reasonably believes is necessary for performance of Development or Commercialization, Otsuka agrees to keep Acucela reasonably informed from time to time, through the JDC, JCC or applicable Operating Team, regarding the general status of Manufacturing Activities related to the Licensed Product (including Other Indication Product(s), as applicable) and from time to time shall update Acucela on any foreseeable delays and/or other material issues relating to Manufacturing the Licensed Product (including Other Indication Product(s), as applicable). Through the JDC or applicable Operating Team, Otsuka and Acucela shall confer and discuss CMC matters, and Otsuka agrees to consider suggestions of Acucela regarding CMC matters.

  • Supply Agreement Seller and Buyer, or their Affiliates, shall have executed the Supply Agreement.

  • Supply Agreements For a period of three years from the consummation of the IPO, Odetics shall not unilaterally terminate or assign its guarantee obligation with respect to any supply agreement pursuant to which it has guaranteed the performance by ATL of ATL's obligations, unless such suppliers have consented to the termination or assignment of such guarantee.

  • Manufacturing and Supply (a) Depomed shall supply Product for use in conducting Depomed’s development activities for Product in the Field and in the Territory as set forth in Exhibit D. (b) During the four-year period beginning on the Effective Date (the “Supply Period”), Depomed shall supply and package (or have supplied and packaged) Product pursuant to this Section 4.8. Depomed will use commercially reasonable efforts to enter into a long-term Product supply agreement with [***] days after the Effective Date (the “Depomed Supply Agreement”) that will be freely assignable to Solvay or its Affiliates, successors or assigns at any time. In addition, Depomed and Solvay will negotiate and enter into a Product supply agreement with business terms substantially similar to the Depomed Supply Agreement concurrently with the execution and delivery by Depomed and [***] of the Depomed Supply Agreement (the “Solvay Supply Agreement”, and, together with the Depomed Supply Agreement, the “Supply Agreements”). The Supply Agreements will, together, contain the following provisions (among others mutually agreeable to the Parties): (i) Under the Solvay Supply Agreement, Depomed will agree to supply Solvay with its requirements of finished, packaged Product during the Supply Period; (ii) All manufacturing and records will be performed and maintained in accordance with specifications, cGMP and Applicable Law; (iii) Depomed will provide reasonable assistance to Solvay in the event Solvay wishes to qualify a backup Product manufacturer; (iv) Depomed shall [***]; (v) Solvay will pay Depomed the following amounts in connection with all activities performed by or on behalf of Depomed associated with Product manufacture and supply (other than activities specified on Exhibit D) (A) [***]% of Depomed’s out-of-pocket costs incurred in connection with such manufacture and supply of Product to Solvay, and (B) a labor charge equal to the FTE Charges for all Depomed employees allocated to the manufacture and supply of Product to Solvay, not to exceed FTE Charges for an aggregate of [***] during any given calendar quarter (and Depomed shall provide to Solvay periodic reports detailing the FTE Charges for which Solvay must pay Depomed hereunder);

  • Collaboration Agreement The Collaboration Agreement shall not have been terminated in accordance with its terms and shall be in full force and effect.

  • Software License Agreement 1) Customers acquiring software licenses under the Contract shall hold, use and operate such software subject to compliance with the Software License Agreement set forth in Appendix D of this Contract. No changes to the Software License Agreement terms and conditions may be made unless previously agreed to between Vendor and DIR. Customers may not add, delete or alter any of the language in Appendix D; provided however, that a Customer and Vendor may agree to additional terms and conditions that do not diminish a term or condition in the Software License Agreement, or in any manner lessen the rights or protections of Customer or the responsibilities or liabilities of Vendor. Order Fulfiller shall make the Software License Agreement terms and conditions available to all Customers at all times. 2) Compliance with the Software License Agreement is the responsibility of the Customer. DIR shall not be responsible for any Customer’s compliance with the Software License Agreement. If DIR purchases software licenses for its own use under this Contract, it shall be responsible for its compliance with the Software License Agreement terms and conditions.

  • Quality Agreement Concurrently with execution of this Agreement, the Parties will enter into an agreement that details the quality assurance obligations of each Party with respect to the Manufacture and supply of Supplied Products under this Agreement (the “Quality Agreement”). Each Party shall perform its obligations under the Quality Agreement in accordance with the terms and conditions thereof. In the event of a conflict between the terms of the Quality Agreement and the terms of this Agreement, the provisions of the Quality Agreement shall govern.

  • License Agreement The Trust shall have the non-exclusive right to use the name "Invesco" to designate any current or future series of shares only so long as Invesco Advisers, Inc. serves as investment manager or adviser to the Trust with respect to such series of shares.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • Sublicense Agreements Sublicenses under this Section 2.3 shall be granted only pursuant to written agreements, which shall be subject to and consistent with the terms and conditions of this Agreement. Such Sublicense agreements shall contain, among other things, provisions to the following effect: 2.3.2.1 all provisions necessary to ensure Licensee’s ability to comply with Licensee’s obligation under or not violate the provisions of Sections 4.4, 4.5, 4.6, 5.1, 5.3, 5.4, 8.1 and 11.1; 2.3.2.2 a section substantially the same as Article 9 (Indemnification), which also shall state that the Indemnitees (as defined in Section 9.1) are intended third party beneficiaries of such Sublicense agreement for the purpose of enforcing such indemnification; 2.3.2.3 in the event of termination of the license set forth in Section 2.1.1 above (in whole or in part (e.g., termination of the license as to a Licensed Product or in a particular country)), any existing Sublicense shall terminate to the extent of such terminated license; provided, however, that, for each Sublicensee, upon termination of the license, if the Sublicensee is not then in breach of the Sublicense agreement such that Licensee would have the right to terminate such Sublicense agreement, such Sublicensee shall have the right to obtain a license from Harvard on the same terms and conditions as set forth herein, which shall not impose any representations, warranties, obligations or liabilities on Harvard that are not included in this Agreement, provided that (a) the scope of the license granted directly by Harvard to such Sublicensee shall be coextensive with the scope of the license granted by Licensee to such Sublicensee, (b) if the Sublicense granted to such Sublicensee was non-exclusive, such Sublicensee shall not have the right to participate in the prosecution or enforcement of the Patent Rights under the license granted to it directly by Harvard and (c) if there are more than one Sublicensee, each Sublicensee that is granted a direct license shall be responsible for a pro rata share of the reimbursement due under Section 6.2.3 of this Agreement (based on the number of direct licenses under the Patent Rights in effect on the date of reimbursement); 2.3.2.4 the Sublicensee shall only be entitled to sublicense its rights under such Sublicense agreement on the terms set forth in this Section 2.3; and 2.3.2.5 the Sublicensee shall not be entitled to assign the Sublicense agreement without the prior written consent of Harvard, except that Sublicensee may assign the Sublicense agreement to a successor in connection with the merger, consolidation or sale of all or substantially all of its assets or that portion of its business to which the Sublicense agreement relates; provided, however, that any permitted assignee agrees in writing in a manner reasonably satisfactory to Harvard to be bound by the terms of such Sublicense agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!