MEASUREMENT, GAS QUALITY, AND FAILURE TO MEET SPECIFICATIONS Sample Clauses

MEASUREMENT, GAS QUALITY, AND FAILURE TO MEET SPECIFICATIONS. 4.1 Biomethane delivered at the Receipt Point Facilities will be measured by NW Natural measurement equipment installed, operated and maintained at or near the Receipt Point Facilities. The unit of volume for the purpose of measurement will be one (1) cubic foot of gas at a base temperature of 60 °F, and at a base pressure of 14.73 psia. Such measured volumes, converted to Mcf, will be multiplied by their gross heating value per cubic foot and divided by 1,000 to determine dekatherms (Dth) received and delivered hereunder. The unit of energy or thermal units for the purpose of balancing total receipts and deliveries of Biomethane hereunder will be one (1) Dth. The volumes of Biomethane measured hereunder will be computed in accordance with determination of thermal units as specified in the Tariff. 4.2 At Producer’s sole cost and expense, all Biomethane delivered by Producer to NW Natural owned and operated facilities will conform to the quality specifications set forth in the Biomethane Quality Specification attached hereto in Exhibit D and made a part hereof. 4.3 If there are multiple quality monitoring devices providing information for the same constituents, the one(s) maintained by NW Natural will be the official measurement source. 4.4 NW Natural may request a deviation from the monitoring equipment and interval requirements where additional measures are necessary to provide reliable service in a safe environment.
Sample 1Sample 2
AutoNDA by SimpleDocs
MEASUREMENT, GAS QUALITY, AND FAILURE TO MEET SPECIFICATIONS. 4.1 Biomethane delivered at the Receipt Point Facilities shall be measured by NW Natural measurement equipment installed, operated and maintained at or near such Receipt Point Facilities. The unit of volume for the purpose of measurement shall be one (1) cubic foot of gas at a base temperature of 60 °F, and at a base pressure of 14.73 psia. Such measured volumes, converted to Mcf, shall be multiplied by their gross heating value per cubic foot and divided by 1,000 to determine dekatherms (Dth) received and delivered hereunder. The unit of energy or thermal units for the purpose of balancing total receipts and deliveries of Biomethane hereunder shall be one (1) Dth. The volumes of Biomethane measured hereunder shall be computed in accordance with determination of thermal units as specified in the Tariff. NW Natural will perform regular calibration procedures on its measurement equipment at intervals consistent with industry standards and NW Natural will share data from this calibration with Producer at Producer’s request. Shell shall install its own biomethane measurement equipment; and, to the extent NW Natural’s equipment is out of operation, Shell’s measurement equipment will be used in lieu of NW Natural’s equipment to perform the measurement required under this Section 4.1. 4.2 At Producer’s sole cost and expense, all Biomethane delivered by Producer to NW Natural owned and operated facilities shall conform to the quality specifications set forth in the Biomethane Quality Specification attached hereto in Exhibit D and made a part hereof. 4.3 If there are multiple quality monitoring devices providing information for the same constituents, the one(s) maintained by NW Natural will be the official measurement source. 4.4 NW Natural may request a deviation from the monitoring equipment and interval requirements where additional measures are necessary to provide reliable service in a safe environment.
Sample 1

Related to MEASUREMENT, GAS QUALITY, AND FAILURE TO MEET SPECIFICATIONS

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Process shall be deemed a Specification change. No change in the Specifications shall be implemented by Catalent, whether requested by Client or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Unit Pricing). Catalent shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, Catalent shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. Catalent reserves the right to postpone effecting changes to the Specifications until such time as the parties agree to and execute the required written amendment.

  • CERTIFICATION REGARDING DRUG-FREE WORKPLACE REQUIREMENTS 1. The Contractor certifies that it will provide a drug-free workplace by: a. Publishing a statement notifying employees that the unlawful manufacture, distribution, dispensing, possession or use of a controlled substance is prohibited in the Contractor’s workplace and specifying the actions that will be taken against employees for violation of such prohibition;

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Quality- and Cost-Based Selection Except as ADB may otherwise agree, the Borrower shall apply quality- and cost-based selection for selecting and engaging consulting services.

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!