API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.
Licensee “Licensee” means the individual or company that has entered into an Agreement with the Embassy. “Offer” means a response to a solicitation that, if accepted, would bind the offeror to perform the resultant Agreement.
AMD AMD shall keep records in sufficient detail to enable FoundryCo to determine that AMD has complied with its second sourcing limitations in Section 2.1(b) and its GPU Product volume sourcing commitments in Section 2.1(c). AMD shall permit said records to be inspected, at FoundryCo’s expense, upon reasonable advance notice, during regular business hours by an independent auditor selected by FoundryCo and approved by AMD, which approval shall not be unreasonably withheld. The audit shall be for the purpose of verifying that AMD has complied with its second source restrictions in Section 2.1(b) and its GPU Product sourcing commitments in Section 2.1(c). Inspections conducted under this Section 8.1(b) shall be at FoundryCo’s expense, unless AMD has a non-compliance variance adverse to FoundryCo of [****] percent ([****]%) or more of (i) the relevant [****] percent ([****]%) second source restriction or (ii) the GPU Minimum Percentage for the applicable audited period, in which case AMD shall bear the reasonable expenses of such audit.
Licensor any Person from whom a Grantor obtains the right to use any Intellectual Property. Lien: any Person’s interest in Property securing an obligation owed to, or a claim by, such Person, whether such interest is based on common law, statute or contract, including liens, security interests, pledges, hypothecations, statutory trusts, reservations, exceptions, encroachments, easements, rights-of-way, covenants, conditions, restrictions, leases, and other title exceptions and encumbrances affecting Property. Lien Waiver: an agreement, in form and substance satisfactory to Agent, by which (a) for any material Collateral located on leased premises, the lessor waives or subordinates any Lien it may have on the Collateral, and agrees to permit Agent to enter upon the premises and remove the Collateral or to use the premises to store or dispose of the Collateral; (b) for any Collateral held by a warehouseman, processor, shipper, customs broker or freight forwarder, such Person waives or subordinates any Lien it may have on the Collateral, agrees to hold any Documents in its possession relating to the Collateral as agent for Agent, and agrees to deliver the Collateral to Agent upon request; (c) for any Collateral held by a repairman, mechanic or bailee, such Person acknowledges Agent’s Lien, waives or subordinates any Lien it may have on the Collateral, and agrees to deliver the Collateral to Agent upon request; and (d) for any Collateral subject to a Licensor’s Intellectual Property rights, the Licensor grants to Agent the right, vis-à-vis such Licensor, to enforce Agent’s Liens with respect to the Collateral, including the right to dispose of it with the benefit of the Intellectual Property, whether or not a default exists under any applicable License.
Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY.
(b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item.
(c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
Distributor The Trust hereby appoints the Distributor as general distributor of shares of beneficial interest (“Series shares”) of the Trust’s WCM Funds series (the “Series”) during the term of this Agreement. The Trust reserves the right, however, to refuse at any time or times to sell any Series shares hereunder for any reason deemed adequate by the Board of Trustees of the Trust.
Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.
Recipient Products Updated Project Schedule (if applicable) • Updated List of Match Funds (if applicable) • Updated List of Permits (if applicable) • Kick-off Meeting Agenda
Third Party Materials The Application may display, include, or make available third-party content (including data, information, applications, and other products, services, and/or materials) or provide links to third-party websites or services, including through third- party advertising ("Third-Party Materials"). You acknowledge and agree that Company is not responsible for Third-Party Materials, including their accuracy, completeness, timeliness, validity, copyright compliance, legality, decency, quality, or any other aspect thereof. Company does not assume and will not have any liability or responsibility to you or any other person or entity for any Third-Party Materials. Third-Party Materials and links thereto are provided solely as a convenience to you, and you access and use them entirely at your own risk and subject to such third parties' terms and conditions.
