Documents & Data; Licensing of Intellectual Property This Agreement creates a non-exclusive and perpetual license for City to copy, use, modify, reuse, or sublicense any and all copyrights, designs, and other intellectual property embodied in plans, specifications, studies, drawings, estimates, and other documents or works of authorship fixed in any tangible medium of expression, including but not limited to, physical drawings or data magnetically, electronically or otherwise recorded or stored, which are prepared or caused to be prepared by Consultant under this Agreement (“Documents & Data”). All Documents & Data shall be and remain the property of City, and shall not be used in whole or in substantial part by Consultant on other projects without the City's express written permission. Within thirty (30) days following the completion, suspension, abandonment or termination of this Agreement, Consultant shall provide to City reproducible copies of all Documents & Data, in a form and amount required by City. City reserves the right to select the method of document reproduction and to establish where the reproduction will be accomplished. The reproduction expense shall be borne by City at the actual cost of duplication. In the event of a dispute regarding the amount of compensation to which the Consultant is entitled under the termination provisions of this Agreement, Consultant shall provide all Documents & Data to City upon payment of the undisputed amount. Consultant shall have no right to retain or fail to provide to City any such documents pending resolution of the dispute. In addition, Consultant shall retain copies of all Documents & Data on file for a minimum of five (5) years following completion of the Project, and shall make copies available to City upon the payment of actual reasonable duplication costs. In addition, before destroying the Documents & Data following this retention period, Consultant shall make a reasonable effort to notify City and provide City with the opportunity to obtain the documents.
Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.
Development License Subject to the terms and conditions of this XXXX, You are licensed to perform an installation of the SOFTWARE for an unlimited use in designing, testing and creating Developed Software by unlimited Developers on one or more computers.
Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use anx xxxxxcense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, Inx." xxxdemaxxx (xxgether, the "Scuddex Xxxxx"), xxx xerexx xxant the Trust a nonexclusive right xxx xxxlicense to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Namx"), xxd (ii) the Scudder Marks in connection with the Trust's investment products xxx xxxvices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best xxxxxxx to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to suxxxxxxxe or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks othxx xxxx the rights granted herein, that all of txx Xxxxt's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company xx xxxer and licensor of the Scudder Marks (xxx "Xrademark Owner"), and that the Trust shall nxx xxxxlenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Truxx xxxxher agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of duaxxxx, xs may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. Xx xxch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon ax, xx xawfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar therexx (xxxluding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agrexxxxx xetween you (or your Successor) and the Fund is terminated.
Business License Prior to commencement of work, Consultant shall obtain a business license from City.
Professional Development; Adverse Consequences of School Exclusion; Student Behavior The Board President or Superintendent, or their designees, will make reasonable efforts to provide ongoing professional development to Board members about the adverse consequences of school exclusion and justice-system involvement, effective classroom management strategies, culturally responsive discipline, appropriate and available supportive services for the promotion of student attendance and engagement, and developmentally appropriate disciplinary methods that promote positive and healthy school climates, i.e., Senate Bill 100 training topics. The Board will conduct periodic self-evaluations with the goal of continuous improvement. New Board Member Orientation The orientation process for newly elected or appointed Board members includes:
Research License Each Collaborator shall allow the other Collaborator to practice any of its Non- Subject Inventions for the purpose of performing the Cooperative Work. No license, express or implied, for commercial application(s) is granted to either Collaborator in Non-Subject Inventions by performing the Cooperative Work. For commercial application(s) of Non-Subject Inventions, a license must be obtained from the owner.
TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES The goal of this task is to develop a plan to make the knowledge gained, experimental results, and lessons learned available to the public and key decision makers. • Prepare an Initial Fact Sheet at start of the project that describes the project. Use the format provided by the CAM. • Prepare a Final Project Fact Sheet at the project’s conclusion that discusses results. Use the format provided by the CAM. • Prepare a Technology/Knowledge Transfer Plan that includes: o An explanation of how the knowledge gained from the project will be made available to the public, including the targeted market sector and potential outreach to end users, utilities, regulatory agencies, and others. o A description of the intended use(s) for and users of the project results. o Published documents, including date, title, and periodical name. o Copies of documents, fact sheets, journal articles, press releases, and other documents prepared for public dissemination. These documents must include the Legal Notice required in the terms and conditions. Indicate where and when the documents were disseminated. o A discussion of policy development. State if project has been or will be cited in government policy publications, or used to inform regulatory bodies. o The number of website downloads or public requests for project results. o Additional areas as determined by the CAM. • Conduct technology transfer activities in accordance with the Technology/Knowledge Transfer Plan. These activities will be reported in the Progress Reports. • When directed by the CAM, develop Presentation Materials for an Energy Commission- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California Energy Commission. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Prepare a Technology/Knowledge Transfer Report on technology transfer activities conducted during the project. • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final)
Requester and Approved User Responsibilities The Requester agrees through the submission of the DAR that the PI named has reviewed and understands the principles for responsible research use and data management of the genomic datasets as defined in the NIH Security Best Practices for Controlled-Access Data Subject to the GDS Policy. The Requester and Approved Users further acknowledge that they are responsible for ensuring that all uses of the data are consistent with national, tribal, and state laws and regulations, as appropriate, as well as relevant institutional policies and procedures for managing sensitive genomic and phenotypic data. The Requester certifies that the PI is in good standing (i.e., no known sanctions) with the institution, relevant funding agencies, and regulatory agencies and is eligible to conduct independent research (i.e., is not a postdoctoral fellow, student, or trainee). The Requester and any Approved Users may use the dataset(s) only in accordance with the parameters described on the study page and in the 1 If contractor services are to be utilized, PI requesting the data must provide a brief description of the services that the contractor will perform for the PI (e.g., data cleaning services) in the research use statement of the DAR. Additionally, the Key Personnel section of the DAR must include the name of the contractor’s employee(s) who will conduct the work. These requirements apply whether the contractor carries out the work at the PI’s facility or at the contractor’s facility. In addition, the PI is expected to include in any contract agreement requirements to ensure that any of the contractor’s employees who have access to the data adhere to the NIH GDS Policy, this Data Use Certification Agreement, and the NIH Security Best Practices for Controlled-Access Data Subject to the GDS Policy. Note that any scientific collaborators, including contractors, who are not at the Requester must submit their own DAR. Addendum to this Agreement for the appropriate research use, as well as any limitations on such use, of the dataset(s), as described in the DAR, and as required by law. Through the submission of this DAR, the Requester and Approved Users acknowledge receiving and reviewing a copy of the Addendum which includes Data Use Limitation(s) for each dataset requested. The Requester and Approved Users agree to comply with the terms listed in the Addendum. Through submission of the DAR, the PI and Requester agree to submit a Project Renewal or Project Close-out prior to the expiration date of the one (1) year data access period. The PI also agrees to submit an annual Progress Update prior to the one (1) year anniversary2 of the project, as described under Research Use Reporting (Term 10) below. By approving and submitting the attached DAR, the Institutional Signing Official provides assurance that relevant institutional policies and applicable local, state, tribal, and federal laws and regulations, as applicable, have been followed, including IRB approval, if required. Approved Users may be required to have IRB approval if they have access to personal identifying information for research participants in the original study at their institution, or through their collaborators. The Institutional Signing Official also assures, through the approval of the DAR, that other institutional departments with relevant authorities (e.g., those overseeing human subjects research, information technology, technology transfer) have reviewed the relevant sections of the NIH GDS Policy and the associated procedures and are in agreement with the principles defined. The Requester acknowledges that controlled-access datasets subject to the NIH GDS Policy may be updated to exclude or include additional information. Unless otherwise indicated, all statements herein are presumed to be true and applicable to the access and use of all versions of these datasets.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.