Sprinklers Subject to any terms, conditions and limitations set forth herein, Landlord shall provide an operative sprinkler system consisting of mains, laterals, and heads “AS IS” on the date of delivery of the Premises to Tenant. Tenant shall pay for piping distribution, drops and relocation of, or additional, sprinkler system heads and Building firehose or firehose valve cabinets, if Tenant’s Plans and/or any applicable Laws necessitate such.
Modification of Services The Company may modify its selection of services at any time during the calendar year by giving DRS written notice of the additional services it wishes to receive, and/or the services it no longer wishes to receive, from DRS. The requested modification in services shall take effect on the first day of the first calendar month beginning at least thirty (30) days after the Company sent written notice to DRS.
Alterations, Modifications and Additions The Grantor will make (or cause to be made) such alterations and modifications in and additions to such Airframe and each such Engine as may be required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which such Aircraft may then be registered; provided that the Grantor may, in good faith, contest the validity or application of any such requirement in any manner that does not involve any material risk of sale, loss or forfeiture of such Aircraft and does not adversely affect the Trustee’s interest in the Aircraft Collateral. In addition, the Grantor (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to such Airframe or any such Engine as the Grantor may deem desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts, provided that no such alteration, modification or addition shall materially diminish the value or utility of such Airframe or such Engine below its value or utility, immediately prior to such alteration, modification or addition, assuming that such Airframe or such Engine was then in the condition required to be maintained by the terms of this Aircraft Security Agreement, except that the value (but not the utility) of such Airframe or such Engine may be reduced by the value of any such Parts that shall have been removed that the Grantor deems obsolete or no longer suitable or appropriate for use on such Airframe or such Engine. All Parts incorporated or installed in or attached or added to such Airframe or any such Engine as the result of such alteration, modification or addition shall be free and clear of any Liens, other than Permitted Liens, and shall, without further act, be subject to the Lien of this Aircraft Security Agreement. Notwithstanding the foregoing, the Grantor (or any Permitted Lessee) may, at any time, remove any Part from such Airframe or any such Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to such Airframe or such Engine at the time of delivery thereof to the Grantor or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to such Airframe or such Engine pursuant to the first sentence of this Section 6.03(c) or Section 6.01(d) and (iii) can be removed from such Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Aircraft Security Agreement that such Airframe or such Engine would have had had such Part never been installed on such Airframe or such Engine. Upon the removal by the Grantor of any Part as permitted by this Section 6.03(c), such removed Part shall, without further act, be free and clear of the Lien of this Aircraft Security Agreement and of all rights and interests of the Trustee (and the other beneficiaries hereof) and shall no longer be deemed a Part hereunder. Upon request of the Grantor from time to time, the Trustee shall execute and deliver to the Grantor an appropriate instrument confirming the release of any such removed Part from the Lien of this Aircraft Security Agreement.
Sprinkler System If there now is or shall be installed in the Building a "sprinkler system", and such system or any of its appliances shall be damaged or injured or not in proper working order by reason of any act or omission of Tenant, Tenant's agents, servants, employees, licensees or visitors, Tenant shall forthwith restore the same to good working condition at its own expense; and if the New York Board of Fire Underwriters or the New York Fire Insurance Rating Organization or any bureau, department or official of the state or city government, shall require or recommend that any changes, modifications, alterations or additional sprinkler heads or other equipment be made or supplied by reason of Tenant's business, or the location of the partitions, trade fixtures, or other contents of the Premises, Tenant shall, at Tenant's expense, promptly make and supply such changes, modifications, alterations, additional sprinkler heads or other equipment.
Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.
ALTERATIONS - ADDITIONS The LESSEE shall not make structural alterations or additions to the leased premises, but may make non-structural alterations provided the LESSOR consents thereto in writing, which consent shall not be unreasonably withheld or delayed. All such allowed alterations shall be at LESSEE's expense and shall be in quality at least equal to the present construction. LESSEE shall not permit any mechanics' liens, or similar liens, to remain upon the leased premises for labor and material furnished to LESSEE or claimed to have been furnished to LESSEE in connection with work of any character performed or claimed to have been performed at the direction of LESSEE and shall cause any such lien to be released of record forthwith without cost to LESSOR. Any alterations or improvements made by the LESSEE shall become the property of the LESSOR at the termination of occupancy as provided herein.
Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.
ALTERATIONS AND ADDITIONS Tenant shall not make, or suffer to be made, any alteration or addition to the Premises, or any part thereof, without the written consent of Landlord first had and obtained by Tenant, but at the cost of Tenant, and any addition to, or alteration of, the Premises, except moveable furniture and trade fixtures, shall at once become a part of the Premises and belong to Landlord. If Landlord consents to the making of any alteration, addition, or improvement to or of the Premises by Tenant, the same shall be made by Landlord at Tenant’s sole cost and expense. Any modifications to the building or building systems required by governmental code or otherwise as a result of Tenant’s alterations, additions or improvements shall be made at Tenant’s sole cost and expense. Tenant shall retain title to all moveable furniture and trade fixtures placed in the Premises. All heating, lighting, electrical, air conditioning, partitioning, drapery, carpeting and floor installations made by Tenant, together with all property that has become an integral part of the Premises, shall not be deemed trade fixtures. Tenant agrees that it will not proceed to make any alterations or additions, without having obtained consent from Landlord to do so, and until five (5) days from the receipt of such consent, in order that Landlord may post appropriate notices to avoid any liability to contractors or material suppliers for payment for Tenant’s improvements. Tenant will at all times permit such notices to be posted and to remain posted until the completion of work. Tenant shall, if required by Landlord, secure at Tenant’s own cost and expense, a completion and lien indemnity bond, satisfactory to Landlord, for such work. Tenant further covenants and agrees that any mechanic’s lien filed against the Premises or against the Complex for work claimed to have been done for, or materials claimed to have been furnished to Tenant, will be discharged by Tenant, by bond or otherwise, within ten (10) days after the filing thereof, at the cost and expense of Tenant. Any exceptions to the foregoing must be made in writing and executed by both Landlord and Tenant. Pursuant to California Civil Code Section 1938, Landlord hereby notifies Tenant that as of the Effective Date, the Premises and Building have not undergone inspection by a “Certified Access Specialist” to determine whether the Premises meets all applicable construction related accessibility standards under California Civil Code Section 55.53
Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “
AMENDMENT OR ALTERATION No amendment or alteration of the terms of this Agreement shall be valid unless made in writing and signed by both of the parties hereto.