Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment
Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.
Post-Commercial Operation Date Testing and Modifications Each Party shall at its own expense perform routine inspection and testing of its facilities and equipment in accordance with Good Utility Practice as may be necessary to ensure the continued interconnection of the Large Generating Facility with the Participating TO’s Transmission System in a safe and reliable manner. Each Party shall have the right, upon advance written notice, to require reasonable additional testing of the other Party’s facilities, at the requesting Party’s expense, as may be in accordance with Good Utility Practice.
Effective Date Duration and Renewal This Agreement shall become effective as of May 1, 2010. Unless terminated as provided in Section 14 below, this Agreement shall continue in effect as to each Fund until July 31, 2011 and thereafter from year to year only so long as such continuance is specifically approved at least annually (a) by a majority of those trustees who are not interested persons of CAT or of Columbia WAM, voting in person at a meeting called for the purpose of voting on such approval, and (b) by either the Board or vote of the holders of a “majority of the outstanding shares” of that Fund (which term as used throughout this Agreement shall be construed in accordance with the definition of “vote of a majority of the outstanding voting securities of a company” in Section 2(a)(42) of the 1940 Act).
Parties to Lock-Up Agreements The Company has furnished to the Underwriters a letter agreement in the form attached hereto as Exhibit A (the “Lock-up Agreement”) from each of the persons listed on Exhibit B. Such Exhibit B lists under an appropriate caption the directors and executive officers of the Company. If any additional persons shall become directors or executive officers of the Company prior to the end of the Company Lock-up Period (as defined below), the Company shall cause each such person, prior to or contemporaneously with their appointment or election as a director or executive officer of the Company, to execute and deliver to the Representatives a Lock-up Agreement.
Change of Control; Assignment and Subcontracting Except as set forth in this Section 7.5, neither party may assign any of its rights and obligations under this Agreement without the prior written approval of the other party, which approval will not be unreasonably withheld. For purposes of this Section 7.5, a direct or indirect change of control of Registry Operator or any subcontracting arrangement that relates to any Critical Function (as identified in Section 6 of Specification 10) for the TLD (a “Material Subcontracting Arrangement”) shall be deemed an assignment. (a) Registry Operator must provide no less than thirty (30) calendar days advance notice to ICANN of any assignment or Material Subcontracting Arrangement, and any agreement to assign or subcontract any portion of the operations of the TLD (whether or not a Material Subcontracting Arrangement) must mandate compliance with all covenants, obligations and agreements by Registry Operator hereunder, and Registry Operator shall continue to be bound by such covenants, obligations and agreements. Registry Operator must also provide no less than thirty (30) calendar days advance notice to ICANN prior to the consummation of any transaction anticipated to result in a direct or indirect change of control of Registry Operator. (b) Within thirty (30) calendar days of either such notification pursuant to Section 7.5(a), ICANN may request additional information from Registry Operator establishing (i) compliance with this Agreement and (ii) that the party acquiring such control or entering into such assignment or Material Subcontracting Arrangement (in any case, the “Contracting Party”) and the ultimate parent entity of the Contracting Party meets the ICANN-‐adopted specification or policy on registry operator criteria then in effect (including with respect to financial resources and operational and technical capabilities), in which case Registry Operator must supply the requested information within fifteen (15) calendar days. (c) Registry Operator agrees that ICANN’s consent to any assignment, change of control or Material Subcontracting Arrangement will also be subject to background checks on any proposed Contracting Party (and such Contracting Party’s Affiliates). (d) If ICANN fails to expressly provide or withhold its consent to any assignment, direct or indirect change of control of Registry Operator or any Material Subcontracting Arrangement within thirty (30) calendar days of ICANN’s receipt of notice of such transaction (or, if ICANN has requested additional information from Registry Operator as set forth above, thirty (30) calendar days of the receipt of all requested written information regarding such transaction) from Registry Operator, ICANN shall be deemed to have consented to such transaction. (e) In connection with any such assignment, change of control or Material Subcontracting Arrangement, Registry Operator shall comply with the Registry Transition Process. (f) Notwithstanding the foregoing, (i) any consummated change of control shall not be voidable by ICANN; provided, however, that, if ICANN reasonably determines to withhold its consent to such transaction, ICANN may terminate this Agreement pursuant to Section 4.3(g), (ii) ICANN may assign this Agreement without the consent of Registry Operator upon approval of the ICANN Board of Directors in conjunction with a reorganization, reconstitution or re-‐incorporation of ICANN upon such assignee’s express assumption of the terms and conditions of this Agreement, (iii) Registry Operator may assign this Agreement without the consent of ICANN directly to a wholly-‐owned subsidiary of Registry Operator, or, if Registry Operator is a wholly-‐owned subsidiary, to its direct parent or to another wholly-‐owned subsidiary of its direct parent, upon such subsidiary’s or parent’s, as applicable, express assumption of the terms and conditions of this Agreement, and (iv) ICANN shall be deemed to have consented to any assignment, Material Subcontracting Arrangement or change of control transaction in which the Contracting Party is an existing operator of a generic top-‐level domain pursuant to a registry agreement between such Contracting Party and ICANN (provided that such Contracting Party is then in compliance with the terms and conditions of such registry agreement in all material respects), unless ICANN provides to Registry Operator a written objection to such transaction within ten (10) calendar days of ICANN’s receipt of notice of such transaction pursuant to this Section 7.5. Notwithstanding Section 7.5(a), in the event an assignment is made pursuant to clauses (ii) or (iii) of this Section 7.5(f), the assigning party will provide the other party with prompt notice following any such assignment.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Program Changes Contractor agrees to inform the County of any alteration in program or service delivery at least thirty (30) days prior to the implementation of the change, or as soon as reasonably feasible.
Updates to Schedules Should any of the information or disclosures provided on any of the Schedules attached hereto become outdated or incorrect in any material respect, the Borrower shall promptly provide the Agent in writing with such revisions or updates to such Schedule as may be necessary or appropriate to update or correct same; provided, however, that no Schedule shall be deemed to have been amended, modified or superseded by any such correction or update, nor shall any breach of warranty or representation resulting from the inaccuracy or incompleteness of any such Schedule be deemed to have been cured thereby, unless and until the Required Banks, in their sole and absolute discretion, shall have accepted in writing such revisions or updates to such Schedule.
Specific Provisions for Access Rights to Software For the avoidance of doubt, the general provisions for Access Rights provided for in this Section 9 are applicable also to Software. Parties’ Access Rights to Software do not include any right to receive source code or object code ported to a certain hardware platform or any right to receive respective Software documentation in any particular form or detail, but only as available from the Party granting the Access Rights.