Provider Obligations A. PROVIDER will perform the Services in accordance with the standards of care, skill, and diligence expected of a qualified, competent and experienced professional in the provision of the type of services required under this Agreement.
B. PROVIDER will obtain, maintain in effect, and pay the cost for all licenses, permits, or certifications that may be necessary for PROVIDER’s performance of this Agreement.
C. PROVIDER represents and warrants that there are no obligations, commitments, third party rights, or impediments of any kind that will limit or prevent PROVIDER’s performance of the Services.
Perform Obligations To perform promptly all of the obligations of Tenant set forth in this Lease; and to pay when due the Fixed Rent and Additional Rent and all charges, rates and other sums which by the terms of this Lease are to be paid by Tenant.
Portfolio Expense and Performance Data The Trust shall provide such data regarding each Portfolio’s expense ratios and investment performance as the Company shall reasonably request, to facilitate the registration and sale of the Variable Contracts. Without limiting the generality of the forgoing, the Trust shall provide the following Portfolio expense and performance data on a timely basis to facilitate the Company’s preparation of its annually updated registration statement for the Variable Contracts (and as otherwise reasonably requested by the Company), but in no event later than 10 calendar days after the close of each Portfolio’s fiscal year:
(a) The gross “Annual Portfolio Company Expenses” for each Portfolio calculated in accordance with Item 3 of Form N-1A, before any expense reimbursements or fee waiver arrangements (and in accordance with (i) Instruction 16 to Item 4 of Form N-4, and (ii) Instruction 4(a) to Item 4 of Form N-6);
(b) The net “Annual Portfolio Company Expenses” (aka “Total Annual Fund Operating Expenses”) for each Portfolio calculated in accordance with Item 3 of Form N-1A, that include any expense reimbursements or fee waiver arrangements (and in accordance with (i) Instruction 17 to Item 4 of Form N-4, (ii) Instruction 4 to Item 17 of Form N-4, (iii) Instruction 4(b) to Item 4 of Form N-6, and (iv) Instruction 4 to Item 18 of Form N-6), and the period for which the expense reimbursements or fee waiver arrangement is expected to continue and whether it can be terminated by the Portfolio (or Fund); and
(c) The “Average Annual Total Returns” for each Portfolio (before taxes) as calculated pursuant to Item 4(b)(2)(iii) of Form N-1A (for the 1, 5, and 10 year periods, and in accordance with (i) Instruction 7 to Item 17 of Form N-4, and (ii) Instruction 7 to Item 18 of Form N-6).
Client Obligations 3.1 The Client warrants and represents that:
3.1.1 it shall co-operate with Centaur as required for the proper performance of the Services;
3.1.2 it shall provide, for Centaur, its agents, subcontractors, consultants and employees, in a timely manner and at no charge, access to the Client's premises during normal office hours (being Monday – Friday 8am – 6pm), office accommodation, data and other facilities as is reasonably required by Centaur or any of them for the proper performance of the Services;
3.1.3 all information it has provided to Centaur in relation to the Services as at the date of the Order Form is accurate, complete and is not misleading and it shall provide, in a timely manner, such further information and Client Material as Centaur may require for the proper performance of the Services, and ensure that such information and Client Material is accurate, complete and not misleading;
3.1.4 it shall be responsible (at its own cost) for preparing and maintaining the relevant premises for the supply of the Services;
3.1.5 it shall inform Centaur of all health and safety rules and regulations and any other reasonable security requirements that apply at any of the Client's premises;
3.1.6 it shall only use the Services for internal business purposes and, without prejudice to the foregoing, shall not use the Services, the Deliverables or any Centaur Materials to develop a product or service that competes with any of the products or services provided by Centaur;
3.1.7 the Client Materials shall not infringe any third party rights, including any third party Intellectual Property Rights; and
3.1.8 it shall obtain and maintain all necessary licences and consents and comply with all relevant legislation in relation to the Services, before the date on which the Services are to start.
3.2 If Centaur's performance of its obligations under this Agreement is prevented or delayed by any act or omission of the Client, its agents, subcontractors, consultants or employees, Centaur shall not be liable for any costs, charges or losses sustained or incurred by the Client that arise directly or indirectly from such prevention or delay.
Developer Obligations In accordance with applicable NYISO requirements, Developer shall maintain satisfactory operating communications with Connecting Transmission Owner and NYISO. Developer shall provide standard voice line, dedicated voice line and facsimile communications at its Large Generating Facility control room or central dispatch facility through use of either the public telephone system, or a voice communications system that does not rely on the public telephone system. Developer shall also provide the dedicated data circuit(s) necessary to provide Developer data to Connecting Transmission Owner and NYISO as set forth in Appendix D hereto. The data circuit(s) shall extend from the Large Generating Facility to the location(s) specified by Connecting Transmission Owner and NYISO. Any required maintenance of such communications equipment shall be performed by Developer. Operational communications shall be activated and maintained under, but not be limited to, the following events: system paralleling or separation, scheduled and unscheduled shutdowns, equipment clearances, and hourly and daily load data.
Supplier Obligations 7.1 The Supplier shall:
7.1.1 at all times allocate sufficient resources to supply the Services in accordance with the Contract;
7.1.2 provide and fulfil any ancillary or incidental service, function or responsibility not specified in the Service Specification where such service, function or responsibility is necessary for the proper performance of the relevant Services;
7.1.3 obtain, and maintain throughout the duration of the Contract, all the consents, approvals, licences and permissions (statutory, regulatory, contractual or otherwise) it may require and which are necessary for the provision of the Services or performance of any other obligation under this Contract;
7.1.4 ensure the Supplier Assets used in the performance of the Services will be free of all encumbrances (except as agreed in writing with the Authority);
7.1.5 ensure that in the performance of its obligations under the Contract it does not disrupt the operations of each Commissioning Body and their respective Personnel;
7.1.6 ensure that any documentation, information and training provided to each Commissioning Body under this Contract (including in relation to the use of the Website) is comprehensive, accurate and prepared in accordance with Good Industry Practice;
7.1.7 co-operate with the Other Supplier(s) and provide reasonable information (including any documentation), advice and assistance in connection with the Services to the Other Supplier(s) including to enable such Other Supplier(s) to provide services to the respective Commissioning Bodies and, on the expiry or termination of this Contract for any reason, to enable the timely transition of the Services (or any of them) to the respective Commissioning Bodies and/or to any Replacement Supplier;
7.1.8 to the extent it is legally able to do so, hold on trust for the sole benefit of the Authority, all warranties and indemnities provided by third parties or any Sub- contractor in respect of any Deliverables and/or the Services and, where any such warranties are held on trust, at its cost enforce such warranties in accordance with any reasonable directions that the Authority may notify from time to time to the Supplier;
7.1.9 unless it is unable to do so, assign to the Authority on the Authority’s written request and at the cost of the Supplier any such warranties and/or indemnities as are referred to in Clause 7.1.8;
7.1.10 provide each Commissioning Body with such advice and assistance as that Commissioning Body may reasonably require during the Contract Period in respect of the supply of the Services;
7.1.11 gather, collate and provide such information and co-operation as the Authority may reasonably request for the purposes of ascertaining the Supplier’s compliance with its obligations under the Contract;
7.1.12 notify the Authority of any circumstances suggesting that a change of Control of the Supplier is planned, in contemplation or has taken place;
7.1.13 notify the Authority in writing of any material detrimental change in the financial standing and/or any change in the credit rating of the Supplier;
7.1.14 subject to Clause 33.6, notify the Authority in writing within ten (10) Working Days of their occurrence, of any actions, suits or proceedings or regulatory investigations before any court or administrative body or arbitration tribunal pending or, to its knowledge, threatened against it that might affect its ability to perform its obligations under the Contract; and
7.1.15 ensure that neither it, nor any of its Affiliates or Personnel, bring any Commissioning Body into disrepute by engaging in any act or omission which is reasonably likely to diminish the trust that the public places in that Commissioning Body, regardless of whether or not such act or omission is related to the Supplier’s obligations under this Contract.
Service Provider Obligations Service Provider shall make the Software and the Services required for provisioning the Software (Software and Services hereinafter together and individually may also be referred to as “Service” or “Services”) available to Customer as described in the Services Description and in the Services Specific Terms (together hereinafter referred to as “Services Description”) referenced in the Order Forms and according to the terms and conditions of this Agreement. Service Provider may amend the Services from time to time, provided that such amendments shall not materially diminish the overall Service. Service Provider aims to provide the Software access to Customer within two (2) working days upon the Effective Date, unless otherwise set forth in the Services Description. The Software may consist of a web application provided to Customer in form of a software as a service solution and a mobile application to be installed by Customer on its mobile device. The agreed scope and quality of the Services is exclusively set forth in the Services Description. Public statements concerning the Service made by Service Provider or its agents will only take form when expressively confirmed by Service Provider in writing. Notwithstanding section 7.1, information and specifications contained within the Services Description shall not qualify as warranty or guarantee with regards to the Service’s quality or as any other kind of guarantee, unless they have been confirmed as such by Service Provider in writing. Service Provider may update and improve the Services from time to time; any such Updates, meaning software that remedies "Defects" (as defined in section 7.4) in the Services and/or may include minor improvements of the Services, are included in the Agreement. In addition to Updates, Service Provider may offer Upgrades and/or Add-On Services to the Services, where “Upgrades” mean new capabilities or functionalities of the Services and “Add-On Services” either mean (i) new and/or additional functionality packages in form of separate modules to the Services, or (ii) integrations or connection applications with other Hilti or third party software applications. Upgrades and Add-On Services are only subject to the Agreement, if ordered separately and paid for by Customer, where additional terms and conditions may apply.
Compliance Obligations Partner will conduct operations in compliance with applicable laws, rules and regulations in exercising its rights and obligations under this Agreement. Laws may include but not be limited to the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act, and local anticorruption legislation that may apply. Partner undertakes that no payments or transfers of value shall be made which have the purpose or effect of public or commercial bribery, or other unlawful or improper means of influencing or obtaining business. Partner agrees that such payment of money, kickback, or anything of value shall be deemed a material breach for purposes of this Agreement. Partner will comply with SAP’s Partner Code of Conduct, or its own code of conduct if comparable standards are established. Partner confirms that it is not listed by any government agency as debarred, suspended, or proposed for suspension or debarment or otherwise determined to be ineligible for government procurement programs.
Payment and Performance of Obligations Pay and perform all material Obligations under this Agreement and the other Loan Documents, and pay or perform (a) all taxes, assessments and other governmental charges that may be levied or assessed upon it or any of its property, and (b) all other indebtedness, obligations and liabilities in accordance with customary trade practices; except to the extent that IPT or the Borrower is contesting any item described in clauses (a) or (b) of this Section 7.5 in good faith and is maintaining adequate reserves with respect thereto in accordance with GAAP.
Parallel Operation Obligations Once the Small Generating Facility has been authorized to commence parallel operation, the Interconnection Customer shall abide by all rules and procedures pertaining to the parallel operation of the Small Generating Facility in the applicable control area, including, but not limited to: (1) the rules and procedures concerning the operation of generation set forth in the NYISO tariffs or ISO Procedures or the Connecting Transmission Owner’s tariff; (2) any requirements consistent with Good Utility Practice or that are necessary to ensure the safe and reliable operation of the Transmission System or Distribution System; and (3) the Operating Requirements set forth in Attachment 5 of this Agreement.
