Common use of Network (Floating) Licenses Clause in Contracts

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used at Customer facilities located in North, Central and South America (MSC’s “Americas Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one ne time does not exceed the number of floating licenses (or “licensing units/tokens” tokens in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used used, by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License. 4.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facilityfacilities); (ii) if If Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility)Site; (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities)located; or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.,

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Authorised Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility)Site; (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities)located; or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that the Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically at the Installation Site solely on Customer machines located at the Installation Site and served by the Customer Computer (on client machines located at the Installation Sitelicense server), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (solely on client Customer machines located at any such Customer facilityfacilities and served by the Customer Computer (license server); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (solely on client Customer machines located at such Customer facilitiesfacilities and served by the Customer Computer (license server); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used at Customer facilities located in Norththe FFT-designated “Region” (e.g., Central and South America (MSC’s “Americas Region”the Americas, EMEA, Asia/Pacific) (in which it was acquired solely on client Customer machines located at such Customer facilitiesfacilities and served by the Customer Computer (license server), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server“License Server”) and Authorized Users may access and use the Software on client Customer machines served by the license serverLicense Server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” tokens in the case of an MSC a “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following terms and restrictions: (i) if -If Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be installed, accessed or used by Authorized Users physically located at the Installation Site (on client Customer machines served by the License Server and physically located at the Installation Site), or if ; except that Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users employees physically located at any Customer facility within ten a fifty (1050) miles mile radius of the Installation Site may access and use the Software by remote access to Customer’s network and the License Server through VPN (but solely on client Customer machines served by the License Server and physically located at any such Customer facilitywithin a fifty (50) mile radius of the Installation Site); (ii) if . -If Customer acquires a Country Network License, the Software may only be installed, accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located; except that Customer employees physically located within such country may access and use the Software by remote access to Customer’s network and the License Server through VPN (but solely on client Customer machines served by the License Server and physically located at within such Customer facilitiescountry); or (iii) if . -If Customer acquires a Regional Network License, the Software may only be installed, accessed or used by Authorized Users physically located at Customer facilities within the specified Region where the Installation Site is located; except that Customer employees physically located in North, Central within such Region may access and South America use the Software by remote access to Customer’s network and the License Server through VPN (MSC’s “Americas but solely on Customer machines served by the License Server and physically located within such Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any -Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, License unless it is expressly identified otherwise in the Order Schedule as a “Country” or “Regional” Network LicenseSchedule.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility)Site; (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities)located; or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”); or (iv) (on client machines if Customer acquires a Worldwide Network License, the Software may be accessed or used by Authorized Users at Customer facilities located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical dataworldwide. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.,

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that the Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically at the Installation Site solely on Customer machines located at the Installation Site and served by the Customer Computer (on client machines located at the Installation Sitelicense server), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (solely on client Customer machines located at any such Customer facilityfacilities and served by the Customer Computer (license server); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (solely on client Customer machines located at such Customer facilitiesfacilities and served by the Customer Computer (license server); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used at Customer facilities located in Norththe MSC-designated “Region” (e.g., Central and South America (MSC’s “Americas Region”the Americas, EMEA, Asia/Pacific) (in which it was acquired solely on client Customer machines located at such Customer facilitiesfacilities and served by the Customer Computer (license server), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server“License Server”) and Authorized Users may access and use the Software on client Customer machines served by the license serverLicense Server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” tokens in the case of an MSC a “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following terms and restrictions: (i) if -If Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be installed, accessed or used by Authorized Users physically located at the Installation Site (on client Customer machines served by the License Server and physically located at the Installation Site), or if ; except that Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users employees physically located at any Customer facility within ten a fifty (1050) miles mile radius of the Installation Site may access and use the Software by remote access to Customer’s network and the License Server through VPN (but solely on client Customer machines served by the License Server and physically located at any such Customer facilitywithin a fifty (50) mile radius of the Installation Site); (ii) if . -If Customer acquires a Country Network License, the Software may only be installed, accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located; except that Customer employees physically located within such country may access and use the Software by remote access to Customer’s network and the License Server through VPN (but solely on client Customer machines served by the License Server and physically located at within such Customer facilitiescountry); or (iii) if . -If Customer acquires a Regional Network License, the Software may only be installed, accessed or used by Authorized Users physically located at Customer facilities within the specified Region where the Installation Site is located; except that Customer employees physically located within such Region may access and use the Software by remote access to Customer’s network and the License Server through VPN (but solely on Customer machines served by the License Server and physically located within such Region). For Regional Network Licenses granted in North America, unless otherwise specified by Hexagon in the Order Schedule or other contract document, the Region shall be the Hexagon’s Americas Region (i.e., North, Central and South America (MSC’s “Americas Region”) (on client machines located at such Customer facilitiesAmerica, subject to Section 14 below), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any -Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, License unless it is expressly identified otherwise in the Order Schedule as a “Country” or “Regional” Network LicenseSchedule.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically at the Installation Site (where the Customer Computer (license server) resides) solely on Customer machines located at the Installation Site (on client machines located at and served by the Installation Site)license server, or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (solely on client Customer machines located at any such Customer facility)facilities and served by the license server; (ii) if If Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (solely on client Customer machines located at such Customer facilities)facilities and served by the license server; or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users at Customer facilities located in MSC’s Americas Region (North, Central and South America (MSC’s “Americas Region”) (America, subject to applicable law, including without limitation, US export laws), solely on client Customer machines located at such Customer facilities), except as prohibited facilities and served by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical datathe license server. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” tokens in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used used, by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” tokens in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used used, by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities); or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License. Groepslogins of gemeenschappelijke logins zijn streng verboden. Bovendien zal het gebruik van de software zoals vastgelegd onder een named-user- licentie toegang geven of gebruikt worden in het land, waar de “Installation Site” is gehuisvest, tenzij anders vastgelegd in het orderschema tenzij anders vermeld in het orderschema.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” tokens in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used used, by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility); (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities); or (iii) if Customer acquires a Regional Network LicenseLicense in the MSC Americas Region, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located in North, Central and South America (MSC’s “Americas Region”) located (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically at the Installation Site (where the Customer Computer (license server) resides) solely on Customer machines located at the Installation Site (on client machines located at and served by the Installation Site)license server, or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (solely on client Customer machines located at any such Customer facility)facilities and served by the license server; (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities facilit ies located within the country where the Installation Site is located (solely on client Customer machines located at such Customer facilities)facilities and served by the license server; or (iii) if Customer acquires a Regional Network LicenseLicense in the MSC Americas Region, the Software may only be accessed or used by Authorized Users at Customer facilities located in North, Central and South America (MSC’s “Americas Region”) (America, solely on client Customer machines located at such Customer facilities)facilities and served by the license server, except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Authorised Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility)Site; (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities)located; or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”); or (iv) (on client machines if Customer acquires a Worldwide Network License, the Software may be accessed or used by Authorized Users at Customer facilities located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical dataworldwide. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country”, “Regional” or “RegionalWorldwide” Network License.

Network (Floating) Licenses. If Customer acquires a Local Network License, Country Network License, or Regional Network License, access to and use of the Software will be controlled by a single Customer Computer (license server) and Authorized Users may access and use the Software on client machines served by the license server, provided that access to and use of the Software at any one time does not exceed the number of floating licenses (or “licensing units/tokens” in the case of an MSC “Licensing System” – see Section 4.3.1) acquired by Customer for that Software. In addition, Customer shall strictly comply with the following restrictions: (i) if Customer acquires a Local Network License (also sometimes referred to simply as a Network License), the Software may only be accessed or used by Authorized Users physically located at the Installation Site (on client machines located at the Installation Site), or if Customer’s local area network is shared by a grouping of Customer facilities, then by Authorized Users physically located at any Customer facility within ten (10) miles of the Installation Site (on client machines located at any such Customer facility)Site; (ii) if Customer acquires a Country Network License, the Software may only be accessed or used by Authorized Users physically located at Customer facilities located within the country where the Installation Site is located (on client machines located at such Customer facilities)located; or (iii) if Customer acquires a Regional Network License, the Software may only be accessed or used by Authorized Users at Customer facilities located in NorthEurope, Central and South America countries in the Middle East and Africa as may be designated by MSC from time to time (collectively, MSC’s “Americas EMEA Region”) (on client machines located at such Customer facilities), except as prohibited by United States and other applicable laws and regulations, including without limitation, those regarding export and import of software and technical data. Any network (floating) license acquired by Customer hereunder shall be deemed a Local Network License, unless it is expressly identified in the Order Schedule as a “Country” or “Regional” Network License.