New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s transmission system. The Customer shall pay the Transmitter=s reasonable costs of doing so. 28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s failure to attend, the Party shall, at the request of the other Party, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity. 28.2.3. The Customer shall, at the Transmitter=s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24. 1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued. 28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s facilities shall be consistent with the requirements applicable to the Transmitter=s transmission system as set out in this Agreement. 28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter. 28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s transmission facilities, on the facilities of another of the Transmitter=s customers or on the facilities of one of the Transmitter=s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.
Appears in 2 contracts
Samples: Connection Agreement, Connection Agreement for Load Customers
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s ’s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s ’s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s ’s transmission system. The Customer shall pay the Transmitter=s ’s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s failure to attend, the Party shall, at the request of the other Party, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s ’s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals approval that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s ’s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
124.1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s ’s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s ’s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.428.2.3. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s ’s facilities shall be consistent with the requirements applicable to the Transmitter=s ’s transmission system as set out in this Agreement.
28.2.528.2.4. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.628.2.5. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s ’s transmission facilities, facilities or on the facilities of another of the Transmitter=s customers or on the facilities of one of the Transmitter=s neighbouring Ontario transmitters’s customers, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.K.
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s ’s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s ’s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s ’s transmission system. The Customer shall pay the Transmitter=s ’s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s ’s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s ’s failure to attend, the Party shall, at the request of the other Partyparty, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s ’s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s ’s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
124.1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s ’s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s ’s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s ’s facilities shall be consistent with the requirements applicable to the Transmitter=s ’s transmission system as set out in this Agreement.
28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s ’s transmission facilities, on the facilities of another of the Transmitter=s ’s customers or on the facilities of one of the Transmitter=s ’s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.K.
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s ’s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s ’s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s ’s transmission system. The Customer shall pay the Transmitter=s ’s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s ’s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s ’s failure to attend, the Party shall, at the request of the other Party, shall pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s ’s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s ’s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s ’s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s ’s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s ’s facilities shall be consistent with the requirements applicable to the Transmitter=s ’s transmission system as set out in this Agreement.
28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s ’s transmission facilities, on the facilities of another of the Transmitter=s ’s customers or on the facilities of one of the Transmitter=s ’s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.K.
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s ’s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s ’s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s ’s transmission system. The Customer shall pay the Transmitter=s ’s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s ’s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s ’s failure to attend, the Party shall, at the request of the other Party, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s ’s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s ’s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s ’s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s ’s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s ’s facilities shall be consistent with the requirements applicable to the Transmitter=s ’s transmission system as set out in this Agreement.
28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s ’s transmission facilities, on the facilities of another of the Transmitter=s ’s customers or on the facilities of one of the Transmitter=s ’s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s ’s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s ’s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s ’s transmission system. The Customer shall pay the Transmitter=s ’s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s failure to attend, the Party shall, at the request of the other Party, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s ’s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals approval that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s ’s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
124.1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s ’s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s ’s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.428.2.3. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s ’s facilities shall be consistent with the requirements applicable to the Transmitter=s ’s transmission system as set out in this Agreement.
28.2.528.2.4. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.628.2.5. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s ’s transmission facilities, facilities or on the facilities of another of the Transmitter=s customers or on the facilities of one of the Transmitter=s neighbouring Ontario transmitters’s customers, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s ’s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s ’s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s ’s transmission system. The Customer shall pay the Transmitter=s ’s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s ’s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s ’s failure to attend, the Party shall, at the request of the other Party, shall pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s ’s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s ’s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s ’s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s ’s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s ’s facilities shall be consistent with the requirements applicable to the Transmitter=s ’s transmission system as set out in this Agreement.
28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s ’s transmission facilities, on the facilities of another of the Transmitter=s ’s customers or on the facilities of one of the Transmitter=s ’s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s transmission system. The Customer shall pay the Transmitter=s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s failure to attend, the Party shall, at the request of the other Partyparty, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s facilities shall be consistent with the requirements applicable to the Transmitter=s transmission system as set out in this Agreement.. Transmission System Code, Appendix 1 (version B)
28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s transmission facilities, on the facilities of another of the Transmitter=s customers or on the facilities of one of the Transmitter=s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.Transmission System Code, Appendix 1 (version B)
Appears in 1 contract
Samples: Connection Agreement
New, Modified or Replacement Customer Facilities. 28.2.1. The Customer shall, at the Transmitter=s request, permit the Transmitter to inspect, test or witness the commissioning of any of the Customer=s new, modified or replacement facilities where the Transmitter reasonably considers that such new, modified or replacement facilities may adversely affect the performance of the Transmitter=s transmission system. The Customer shall pay the Transmitter=s reasonable costs of doing so.
28.2.2. Where section 28.2.1 applies, the inspection, testing or commissioning of the Customer=s facilities shall be conducted at a time that is mutually agreed by the Customer and the Transmitter. If the inspection, test or commissioning is required to be rescheduled at the request of a Party or by reason of a Party=s failure to attend, the Party shall, at the request of the other Partyparty, pay all reasonable costs incurred by the other Party in respect of the rescheduling of the inspection, testing or commissioning activity.
28.2.3. The Customer shall, at the Transmitter=s request, provide the Transmitter with test certificates, including any certificates of inspection or other applicable authorizations or approvals that the Ontario Electrical Safety Authority may have issued, certifying that any of the Customer=s new, modified or replacement facilities have passed the relevant tests and comply with all applicable instruments and standards referred to in paragraphs (a) to (c) of section 24.
124.1. The Transmitter may require the provision of these certificates as a condition of connecting any of the Customer=s new, modified or replacement facilities. The Customer acknowledges that the Transmitter cannot, where a connection authorization or other applicable authorization or approval issued by the Ontario Electrical Safety Authority is required in relation to the Customer=s new, modified or replacement facilities, connect such facilities unless that connection authorization has been issued.
28.2.4. The Transmitter shall provide to the Customer such technical parameters as may be required to assist the Customer in ensuring that the design of the Customer=s facilities shall be consistent with the requirements applicable to the Transmitter=s transmission system as set out in this Agreement.
28.2.5. The Customer shall not make any modifications to its facilities of a type that is specified in section D.2 of Schedule D without the prior approval of the Transmitter.
28.2.6. Where the Transmitter considers that a type of modification that is not already specified in section D.2 of Schedule D is likely to have a material adverse effect on the Transmitter=s transmission facilities, on the facilities of another of the Transmitter=s customers or on the facilities of one of the Transmitter=s neighbouring Ontario transmitters, the Transmitter shall so notify the Customer. The Parties shall then negotiate in good faith appropriate amendments to section D.2 of Schedule D. 29.1. The Parties shall comply with their respective obligations under Schedule J.K.
Appears in 1 contract
Samples: Connection Agreement