Non-Standard Uses Sample Clauses

Non-Standard Uses. Products are designed for standard commercial ----------------- applications such as communications networks only and are not intended for planning, construction, maintenance or direct operation of critical systems or facilities, such as aircraft control systems and nuclear or hazardous waste facilities. Licensee will not use Products for such non- standard applications without OSI's prior consent, which will require additional contractual safeguards. If Licensee uses Products in such a non-standard application, it will be solely liable for the use and will indemnify and hold OSI harmless from all loss, damage, expense or liability in connection with that use.
AutoNDA by SimpleDocs

Related to Non-Standard Uses

  • Construction Standards The Developer shall construct the Subdivision in accordance with the Subdivision Plan, as approved by the Planning Commission, and if applicable, the requirements of the Design Review Committee, and in accordance with the requirements of (a) the Millington Subdivision Regulations; (b) standards and specifications contained in “Local Public Works Standard, and Specifications”, as amended to include specific requirements for construction in Millington, TN; (c) the Building Code (as adopted by Shelby County); (d) the Fire Code (as adopted by Shelby County); (e) the Millington Zoning Ordinance; and (f) the applicable Ordinances of the City. Items (a) through (f) are hereby made a part of this Agreement by reference and are hereinafter referred to collectively as the “Codes”. References herein to the Codes are to those in effect on the Effective Date unless amendments are hereafter made which apply to all improvements or subdivisions regardless of their date of commencement and/or completion of construction. The Conditions of Approval established by the Planning Commission, and, as applicable, the Design Review Committee (any or all of which as may have been modified by the Board of Mayor and Aldermen) are set forth in Exhibit “A” to this Agreement and are incorporated herein by reference and made a part hereof.

  • Reformulation Standard “Reformulated Products” shall mean Products that contain concentrations less than or equal to 0.1% (1,000 parts per million (ppm)) of DEHP when analyzed pursuant to U.S. Environmental Protection Agency testing methodologies 3580A and 8270C or other methodology utilized by federal or state government agencies for the purpose of determining the phthalate content in a solid substance.

  • Reformulation Standards A “reformulated” product (a) contains lead in concentrations that do not exceed 90 parts per million, equivalent to 0.009%, in any exterior parts analyzed pursuant to U.S. Environmental Protection Agency (EPA) methodologies 3050B and 6010B, or (b) yields a result of no more than 1.0 micrograms of lead when sampled according to NIOSH 9100 protocol and analyzed according to EPA 6010B. In addition to the above tests, the Settling Entity may use equivalent methods utilized by any California or federal agency to determine lead content in a solid substance or the amount of the bioavailability of the toxicant through a wipe test, respectively.

  • Design Standards Most recent edition of the “Owner’s Design Standards,” including any partial updates as may be directed by the Owner.

  • Common Areas - Rules and Regulations Lessor or such other person(s) as Lessor may appoint shall have the exclusive control and management of the Common Areas and shall have the right, from time to time, to establish, modify, amend and enforce reasonable rules and regulations (“Rules and Regulations”) for the management, safety, care, and cleanliness of the grounds, the parking and unloading of vehicles and the preservation of good order, as well as for the convenience of other occupants or tenants of the Building and the Project and their invitees. Lessee agrees to abide by and conform to all such Rules and Regulations, and to cause its employees, suppliers, shippers, customers, contractors and invitees to so abide and conform. Lessor shall not be responsible to Lessee for the non-compliance with said Rules and Regulations by other tenants of the Project.

  • Overstandard Tenant Use If Tenant uses water, electricity, heat or air conditioning in excess of that supplied by Landlord pursuant to Section 6.1 of this Lease, Tenant shall pay to Landlord, upon billing, the cost of such excess utility consumption, the cost of the installation, operation, and maintenance of equipment which is required to be installed in order to supply such excess consumption; and, to the extent no previously installed, Landlord may install devices to separately sub-meter any increased use and in such event Tenant shall pay the increased cost directly to Landlord, on demand, at the rates charged by the public utility company furnishing the same, including the cost of such additional metering (or sub-metering) devices. Tenant’s use of electricity shall never exceed the capacity of the feeders to the Property or the risers or wiring installation; provided, however, Tenant shall have the right, subject to the terms of Article 8, to increase such capacity. Notwithstanding anything to the contrary in this Lease, Tenant may operate the HVAC within the Premises at its discretion; provided, however, if Tenant desires to use heat, ventilation or air conditioning during hours other than those for which Landlord is obligated to supply such utilities pursuant to the terms of Section 6.1 of this Lease, Tenant shall reimburse Landlord for the actual cost of supplying chilled water and gas to the Premises during non-Building Hours at the actual rates charged by the utilities, which cost shall be equitably prorated among all Building occupants (other than the Bank) operating HVAC during the same non-Building Hours. For purposes of an example, Exhibit K, attached hereto, sets forth the calculation of such actual utilities costs, with the actual calculation being subject to the actual rates charged by the utilities. Landlord shall, at its sole cost, as part of the Core and Shell Work, provide a cloud-based software system (Workspeed) to allow Tenant to control Tenant’s after-hours HVAC.

  • BUILDING RULES AND REGULATIONS The following rules and regulations shall apply, where applicable, to the Premises, the Building, the parking facilities (if any), the Property and the appurtenances. In the event of a conflict between the following rules and regulations and the remainder of the terms of the Lease, the remainder of the terms of the Lease shall control. Capitalized terms have the same meaning as defined in the Lease.

  • PARKING RULES AND REGULATIONS The following rules and regulations govern the use of the parking facilities which serve the Building. Tenant will be bound by such rules and regulations and agrees to cause its employees, subtenants, assignees, contractors, suppliers, customers and invitees to observe the same: 1. Tenant will not permit or allow any vehicles that belong to or are controlled by Tenant or Tenant’s employees, subtenants, customers or invitees to be loaded, unloaded or parked in areas other than those designated by Landlord for such activities. No vehicles are to be left in the parking areas overnight and no vehicles are to be parked in the parking areas other than normally sized passenger automobiles, motorcycles and pick-up trucks. No extended term storage of vehicles is permitted. 2. Vehicles must be parked entirely within painted stall lines of a single parking stall. 3. All directional signs and arrows must be observed. 4. The speed limit within all parking areas shall be five (5) miles per hour. 5. Parking is prohibited: (a) in areas not striped for parking; (b) in aisles or on ramps; (c) where “no parking” signs are posted; (d) in cross-hatched areas; and (e) in such other areas as may be designated from time to time by Landlord or Landlord’s parking operator. 6. Landlord reserves the right, without cost or liability to Landlord, to tow any vehicle if such vehicle’s audio theft alarm system remains engaged for an unreasonable period of time. 7. Washing, waxing, cleaning or servicing of any vehicle in any area not specifically reserved for such purpose is prohibited. 8. Landlord may refuse to permit any person to park in the parking facilities who violates these rules with unreasonable frequency, and any violation of these rules shall subject the violator’s car to removal, at such car owner’s expense. Tenant agrees to use its best efforts to acquaint its employees, subtenants, assignees, contractors, suppliers, customers and invitees with these parking provisions, rules and regulations. 9. Parking stickers, access cards, or any other device or form of identification supplied by Landlord as a condition of use of the parking facilities shall remain the property of Landlord. Parking identification devices, if utilized by Landlord, must be displayed as requested and may not be mutilated in any manner. The serial number of the parking identification device may not be obliterated. Parking identification devices, if any, are not transferable and any device in the possession of an unauthorized holder will be void. Landlord reserves the right to refuse the sale of monthly stickers or other parking identification devices to Tenant or any of its agents, employees or representatives who willfully refuse to comply with these rules and regulations and all unposted city, state or federal ordinances, laws or agreements. 10. Loss or theft of parking identification devices or access cards must be reported to the management office in the Development immediately, and a lost or stolen report must be filed by the Tenant or user of such parking identification device or access card at the time. Landlord has the right to exclude any vehicle from the parking facilities that does not have a parking identification device or valid access card. Any parking identification device or access card which is reported lost or stolen and which is subsequently found in the possession of an unauthorized person will be confiscated and the illegal holder will be subject to prosecution. 11. All damage or loss claimed to be the responsibility of Landlord must be reported, itemized in writing and delivered to the management office located within the Development within ten (10) business days after any claimed damage or loss occurs. Any claim not so made is waived. Landlord is not responsible for damage by water or fire, or for the acts or omissions of others, or for articles left in vehicles. In any event, the total liability of Landlord, if any, is limited to Two Hundred Fifty Dollars ($250.00) for all damages or loss to any car. Landlord is not responsible for loss of use.

  • Permitted and Prohibited Uses 1.1. The Data may only be used for linguistic education and research, including but not limited to information retrieval, document understanding, machine translation or speech recognition. 1.2. User shall not publish, retransmit, display, redistribute, reproduce or commercially exploit the Data in any form, except that User may include limited excerpts from the Data in articles, reports and other documents describing the results of User’s linguistic education and research.

  • Use of Basement and Service Areas The basement(s) and service areas, if any, as located within the

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!