Numbers Community Sample Clauses

Numbers Community. The Numbers Resource Organization.
AutoNDA by SimpleDocs

Related to Numbers Community

  • AT&T-12STATE acknowledges that CLEC may have an embedded base of one-way trunks ordered and installed prior to the Effective Date of this Agreement that were used for termination of CLEC’s Section 251(b)(5)/IntraLATA Toll Traffic to AT&T-12STATE (Embedded Base). To the extent that CLEC has such an Embedded Base, CLEC shall only augment trunk groups in the Embedded Base with the mutual agreement of the Parties. CLEC shall not order any new one-way trunk groups following the Effective Date of this Agreement. Moreover, the Parties agree that the Embedded Base will be converted to two-way trunk groups under the following circumstances: 4.2.1.1 With reasonable notification from AT&T-12STATE and upon AT&T-12STATE’s request, CLEC shall convert all of its Embedded Base to two-way trunks. 4.2.1.2 At any time an Embedded Base trunk group (either originating or terminating) requires augmentation, AT&T-12STATE can require the associated originating and terminating trunks to be converted to a single two-way trunk group prior to the augmentation. 4.2.1.3 When any network changes are to be performed on a project basis (i.e., central office conversions, tandem re-homes, etc.), upon request and reasonable notice by AT&T-12STATE, CLEC will convert all of its Embedded Base affected by the project within the intervals and due dates required by the project parameters. 4.2.1.4 In addition to the foregoing, CLEC may choose, at any time, to convert its Embedded Base to two-way trunk groups. 4.2.1.5 The Parties will coordinate any trunk group migration, trunk group prioritization and implementation schedule. AT&T-12STATE agrees to develop a cutover plan within thirty (30) days of notification to CLEC of the need to convert pursuant to Section 4.2.1.1 above and Section 4.2.1.3 above.

  • SBC-12STATE 47.1.1 The terms contained in this Agreement and any Appendices, Attachments, Exhibits, Schedules, and Addenda constitute the entire agreement between the Parties with respect to the subject matter hereof, superseding all prior understandings, proposals and other communications, oral or written between the Parties during the negotiations of this Agreement and through the execution and/or Effective Date of this Agreement. This Agreement shall not operate as or constitute a novation of any agreement or contract between the Parties that predates the execution and/or Effective Date of this Agreement.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Residence Community Living Standards The Residence Community Living Standards (“RCLS”) forms a part of this Agreement. It details the rights, responsibilities, and privileges of Residents as well as the residence conduct process. Each Resident is responsible for reading, understanding, and adhering to the terms outlined within the RCLS. The Manager and the Institution may amend the terms of the RCLS from time to time and may post the amendments in the Residence. Failure to abide by the RCLS may result in eviction from Residence and termination of this Agreement as per the violations and sanctions outlined in the RCLS, and as stated in section 8.01(d). The RCLS can be found online at: xxx.xxxxxxxxxxxxxxx.xx.

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Notice to European Union Users StatesideBPO, LLC's operations are located primarily in the United States. If you provide information to us, the information will be transferred out of the European Union (EU) and sent to the United States. (The adequacy decision on the EU-US Privacy became operational on August 1, 2016. This framework protects the fundamental rights of anyone in the EU whose personal data is transferred to the United States for commercial purposes. It allows the free transfer of data to companies that are certified in the US under the Privacy Shield.) By providing personal information to us, you are consenting to its storage and use as described in this Policy. Under the regulations of the General Data Protection Regulation ("GDPR") of the EU you have certain rights as a Data Subject. These rights are as follows: · The right to be informed: this means we must inform you of how we intend to use your personal data and we do this through the terms of this Policy. · The right of access: this means you have the right to request access to the data we hold about you and we must respond to those requests within one month. You can do this by sending an email to xxxx@xxxxxxxxxxxx.xxx. · The right to rectification: this means that if you believe some of the date, we hold is incorrect, you have the right to have it corrected. You can do this by logging into your account with us, or by sending us an email with your request. · The right to erasure: this means you can request that the information we hold be deleted, and we will comply unless we have a compelling reason not to, in which case you will be informed of same. You can do this by sending an email to xxxx@xxxxxxxxxxxx.xxx. · The right to restrict processing: this means you can change your communication preferences or opt-out of certain communications. You can do this by sending an email to xxxx@xxxxxxxxxxxx.xxx. · The right of data portability: this means you can obtain and use the data we hold for your own purposes without explanation. If you wish to request a copy of your information, contact us at xxxx@xxxxxxxxxxxx.xxx. · The right to object: this means you can file a formal objection with us regarding our use of your information with regard to third parties, or its processing where our legal basis is our legitimate interest in it. To do this, please send an email to xxxx@xxxxxxxxxxxx.xxx. In addition to the rights above, please rest assured that we will always aim to encrypt and anonymize your personal information whenever possible. We also have protocols in place in the unlikely event that we suffer a data breach and we will contact you if your personal information is ever at risk. For more details regarding our security protections see the section below or visit our website at xxx.xxxxxxxxxxxx.xxx.

  • Public Works Installation work which is considered public works is excluded from purchase under this Contract. Historically, the New York State Bureau of Public Works has maintained that installation, maintenance, and repair of equipment attached to any wall, ceiling, or floor, or affixed by hard wiring or plumbing is public work. In contrast, installation of a piece of equipment which is portable or a “plug-in” free-standing unit would not be considered public work. Thus, this Contract does not authorize installation where the equipment becomes a permanent part of the building structure, or is otherwise incorporated into the fabric of the building (e.g. installation on a wall, ceiling, or floor in a fixed location, or affixed by hard-wiring or plumbing). See Xxxxxxxx X, §00 Prevailing Wage Rates – Public Works

  • Western LONDON agrees that it will keep records relating to its services hereunder in accordance with all applicable laws, and in compliance with the requirements of Rule 31a-3 under the 1940 Act, WESTERN LONDON hereby agrees that any records that it maintains for the Fund are the property of the Fund, and further agrees to surrender promptly to the Fund any of such records upon the Fund’s request. WESTERN LONDON further agrees to arrange for the preservation of the records required to be maintained by Rule 31a-1 under the 1940 Act for the periods prescribed by Rule 31a-2 under the 1940 Act. (a) WESTERN LONDON, at its expense, shall supply the Board, the officers of the Fund, Xxxx Xxxxx Partners Fund Advisor, LLC and the Subadviser with all information and reports reasonably required by them and reasonably available to WESTERN LONDON relating to the services provided by WESTERN LONDON hereunder. (b) WESTERN LONDON shall bear all expenses, and shall furnish all necessary services, facilities and personnel, in connection with its responsibilities under this Agreement. Other than as herein specifically indicated, WESTERN LONDON shall not be responsible for the Fund’s expenses, including, without limitation, advisory fees; distribution fees; interest; taxes; governmental fees; voluntary assessments and other expenses incurred in connection with membership in investment company organizations; organization costs of the Fund; the cost (including brokerage commissions, transaction fees or charges, if any) in connection with the purchase or sale of the Fund’s securities and other investments and any losses in connection therewith; fees and expenses of custodians, transfer agents, registrars, independent pricing vendors or other agents; legal expenses; loan commitment fees; expenses relating to share certificates; expenses relating to the issuing and redemption or repurchase of the Fund’s shares and servicing shareholder accounts; expenses of registering and qualifying the Fund’s shares for sale under applicable federal and state law; expenses of preparing, setting in print, printing and distributing prospectuses and statements of additional information and any supplements thereto, reports, proxy statements, notices and dividends to the Fund’s shareholders; costs of stationery; website costs; costs of meetings of the Board or any committee thereof, meetings of shareholders and other meetings of the Fund; Board fees; audit fees; travel expenses of officers, members of the Board and employees of the Fund, if any; and the Fund’s pro rata portion of premiums on any fidelity bond and other insurance covering the Fund and its officers, Board members and employees; litigation expenses and any non-recurring or extraordinary expenses as may arise, including, without limitation, those relating to actions, suits or proceedings to which the Fund is a party and the legal obligation which the Fund may have to indemnify the Fund’s Board members and officers with respect thereto.

  • BUILDING NAME AND ADDRESS Tenant shall not utilize any name selected by Landlord from time to time for the Building and/or the Project as any part of Tenant's corporate or trade name. Landlord shall have the right to change the name, address, number or designation of the Building or Project without liability to Tenant.

  • Public Utilities No Restricted Entity or Affiliate thereof is a "holding company," or a "subsidiary company" of a "holding company," or an "affiliate" of a "holding company" or of a "subsidiary company" of a "holding company," within the meaning of the Public Utility Holding Company Act of 1935, as amended. No Restricted Entity or Affiliate thereof is a regulated public utility.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!