What if I Make a Contribution for Which I Am Ineligible or Change My Mind About the Type of IRA to Which I Wish to Contribute?
CONDITIONS FOR EMERGENCY/HURRICANE OR DISASTER - TERM CONTRACTS It is hereby made a part of this Invitation for Bids that before, during and after a public emergency, disaster, hurricane, flood, or other acts of God that Orange County shall require a “first priority” basis for goods and services. It is vital and imperative that the majority of citizens are protected from any emergency situation which threatens public health and safety, as determined by the County. Contractor agrees to rent/sell/lease all goods and services to the County or other governmental entities as opposed to a private citizen, on a first priority basis. The County expects to pay contractual prices for all goods or services required during an emergency situation. Contractor shall furnish a twenty-four (24) hour phone number in the event of such an emergency.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Can I Roll Over or Transfer Amounts from Other IRAs or Employer Plans If properly executed, you are allowed to roll over a distribution from one Traditional IRA to another without tax penalty. Rollovers between Traditional IRAs may be made once every 12 months and must be accomplished within 60 days after the distribution. Beginning in 2015, just one 60 day rollover is allowed in any 12 month period, inclusive of all Traditional, Xxxx, SEP, and SIMPLE IRAs owned. Under certain conditions, you may roll over (tax-free) all or a portion of a distribution received from a qualified plan or tax-sheltered annuity in which you participate or in which your deceased spouse participated. In addition, you may also make a rollover contribution to your Traditional IRA from a qualified deferred compensation arrangement. Amounts from a Xxxx XXX may not be rolled over into a Traditional IRA. If you have a 401(k), Xxxx 401(k) or Xxxx 403(b) and you wish to rollover the assets into an IRA you must roll any designated Xxxx assets, or after tax assets, to a Xxxx XXX and roll the remaining plan assets to a Traditional IRA. In the event of your death, the designated beneficiary of your 401(k) Plan may have the opportunity to rollover proceeds from that Plan into a Beneficiary IRA account. In general, strict limitations apply to rollovers, and you should seek competent advice in order to comply with all of the rules governing rollovers. Most distributions from qualified retirement plans will be subject to a 20% withholding requirement. The 20% withholding can be avoided by electing a “direct rollover” of the distribution to a Traditional IRA or to certain other types of retirement plans. You should receive more information regarding these withholding rules and whether your distribution can be transferred to a Traditional IRA from the plan administrator prior to receiving your distribution.
Termination Upon Purchase by the Master Servicer or Liquidation of All Mortgage Loans (a) Except as otherwise set forth in this Article IX, including, without limitation, the obligation of the Master Servicer to make payments to Certificateholders as hereafter set forth, the Trust and the respective obligations and responsibilities of the Company, the Master Servicer, the Trustee and the Delaware Trustee created hereby shall terminate in accordance with Section 3808 of the Statutory Trust Statute upon (i) the purchase by the Master Servicer pursuant to the following paragraph of this Section 9.01(a) of all Mortgage Loans (other than Liquidated Mortgage Loans), all property acquired in respect of any Mortgage Loan remaining in the Trust and all other property included in the REMIC formed under this Agreement at a price equal, after the deduction of related advances, to the sum of (x) the excess of (A) 100% of the aggregate outstanding Principal Balance of such Mortgage Loans (other than Liquidated Mortgage Loans) plus accrued interest at the applicable Pass-Through Rate with respect to such Mortgage Loan (other than a Liquidated Mortgage Loan) through the last day of the month of such purchase, over (B) with respect to any Mortgage Loan which is not a Liquidated Mortgage Loan, the amount of the Bankruptcy Loss incurred with respect to such Mortgage Loan as of the date of such purchase by the Master Servicer to the extent that the Principal Balance of such Mortgage Loan has not been previously reduced by such Bankruptcy Loss, and (y) the appraised fair market value as of the effective date of the termination of the Trust of (A) all property in the Trust which secured a Mortgage Loan and which was acquired by foreclosure or deed in lieu of foreclosure after the Cut-Off Date, including related Insurance Proceeds, and (B) all other property included in any REMIC formed under this Agreement, any such appraisal to be conducted by an appraiser mutually agreed upon by the Master Servicer and the Trustee, or (ii) the later of the final payment or other liquidation (or any advance with respect thereto) of the last Mortgage Loan remaining in the Trust or the disposition of all property acquired upon foreclosure in respect of any Mortgage Loan, and the payment to the Certificateholders of all amounts required to be paid to them hereunder; provided, however, that in no event shall the Trust continue beyond the expiration of 21 years from the death of the survivor of the issue of Xxxxxx X. Xxxxxxx, the late ambassador of the United States to the Court of St. Xxxxx, living on the date hereof. On any Distribution Date after the first date on which the aggregate Principal Balance of the Mortgage Loans is less than the Clean-Up Call Percentage of the aggregate Principal Balance of the Mortgage Loans as of the Cut-Off Date, the Master Servicer may purchase the outstanding Mortgage Loans (other than Liquidated Mortgage Loans), all property acquired in respect of any Mortgage Loan remaining in the Trust and all other property included in any REMIC formed under this Agreement at the price stated in clause (i) of the preceding paragraph; provided, that the Master Servicer may not so purchase the outstanding Mortgage Loans (other than Liquidated Mortgage Loans), all property acquired in respect of any Mortgage Loan remaining in the Trust and all other property included in any REMIC formed under this Agreement if the price stated in clause (i) of the preceding paragraph exceeds the fair market value, determined in accordance with prudent industry practices, of all outstanding Mortgage Loans (other than Liquidated Mortgage Loans), all property acquired in respect of any Mortgage Loan remaining in the Trust and all other property included in any REMIC formed under this Agreement. If such right is exercised, the Master Servicer shall provide to the Trustee (and to the Company, if the Company is no longer acting as Master Servicer) the written certification of an officer of the Master Servicer (which certification shall include a statement to the effect that all amounts required to be paid in order to purchase the Mortgage Loans have been deposited in the Certificate Account) and the Trustee on behalf of the Trust shall promptly execute all instruments as may be necessary to release and assign to the Master Servicer the Mortgage Files and any foreclosed Mortgaged Property pertaining to the Trust. In no event shall the Master Servicer be required to expend any amounts other than those described in the first paragraph of this Section 9.01(a) in order to terminate the Trust or purchase the Mortgage Loans under this Section 9.01, and in no event shall the Company be required to expend any amounts in connection with such termination or purchase. (b) Notice of any termination, specifying the date upon which the Certificateholders may surrender their Certificates to the Trustee for payment and cancellation, shall be given promptly by letter from the Trustee to Certificateholders mailed not less than 30 days prior to such final distribution, specifying (i) the date upon which final payment of the Certificates will be made upon presentation and surrender of Certificates at the office of the Certificate Registrar therein designated (the “Termination Date”), (ii) the amount of such final payment (the “Termination Payment”) and (iii) that the Record Date otherwise applicable to the Distribution Date upon which the Termination Date occurs is not applicable, payments being made only upon presentation and surrender of the Certificates at the office of the Certificate Registrar therein specified. Upon any such notice, the Certificate Account shall terminate subject to the Master Servicer’s obligation to hold all amounts payable to Certificateholders in trust without interest pending such payment. In the event that all of the Certificateholders shall not surrender their Certificates for cancellation within six months after the Termination Date, the Master Servicer shall give a second written notice to the remaining Certificateholders to surrender their Certificates for cancellation and receive the Termination Payment with respect thereto. If within one year after the second notice all the Certificates shall not have been surrendered for cancellation, the Master Servicer may take appropriate steps to contact the remaining Certificateholders concerning surrender of their Certificates, and the cost thereof shall be paid out of the funds and other assets which remain in trust hereunder. Upon the completion of winding up of the Trust, including the payment or the making reasonable provision for payment of all obligations of the Trust in accordance with Section 3808(e) of the Statutory Trust Statute, the Delaware Trustee shall prepare, the Trustee, the Delaware Trustee and any other trustee hereunder shall sign, and the Delaware Trustee (upon the Trustee’s consent acting at the direction of the Master Servicer) shall file, a certificate of cancellation with the Secretary of State in accordance with Section 3810 of the Statutory Trust Statute, at which time the Trust and this Agreement shall terminate. The Master Servicer shall act as the liquidator of the Trust and shall be responsible for taking all actions in connection with winding up the Trust, in accordance with the requirements of this Agreement (including this Section 9.01 and Section 9.02) and applicable law.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:
Unbundled Sub-Loop Distribution Voice Grade (USLD-VG) is a copper sub- loop facility from the cross-box in the field up to and including the point of demarcation at the End User’s premises and may have load coils.
Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.
Unbundled Sub-Loop Feeder 2.8.4.1 Unbundled Sub-Loop Feeder (USLF) provides connectivity between BellSouth's central office and cross-box (or other access point) that serves an end user location. 2.8.4.2 USLF utilized for voice traffic can be configured as 2-wire voice (USLF-2W/V) or 4-wire voice (USLF-4W/V). 2.8.4.3 USLF utilized for digital traffic can be configured as 2-wire ISDN (USLF-2W/I); 2-wire Copper (USLF-2W/C); 4-wire Copper (USLF-4W/C); 4-wire DS0 level loop (USLF-4W/D0); or 4-wire DS1 and ISDN (USLF-4W/DI). 2.8.4.4 USLF will provide access to both the equipment and the features in the BellSouth central office and BellSouth cross box necessary to provide a 2W or 4W communications pathway from the BellSouth central office to the BellSouth cross- box. This element will allow for the connection of Lightyear’s loop distribution elements onto BellSouth's feeder system.