Order Terms and Returns Sample Clauses

Open Split View

Download

Share

Cite

Order Terms and Returns 

Sample 1

Save

Copy

Related to Order Terms and Returns

• Standard Terms and Conditions Executive expressly understands and acknowledges that the Standard Terms and Conditions attached hereto are incorporated herein by reference, deemed a part of this Agreement and are binding and enforceable provisions of this Agreement. References to “this Agreement” or the use of the term “hereof” shall refer to this Agreement and the Standard Terms and Conditions attached hereto, taken as a whole.

• CONTRACT TERMS AND CONDITIONS This section sets forth the terms and conditions of the Contract.

• ADDITIONAL TERMS AND CONDITIONS This Annex A to the Second Amended and Restated Servicing Agreement, dated October 31, 2021 (the “Agreement”), among Xxxxx Bank and Xxxxx Trust Company, as Sellers, the Bank Assets Purchaser and, upon execution of the Joinder Agreement, the Delaware Trust Assets Purchaser, as Purchasers, and Guarantor (solely for purposes of Section 9.5 of the Agreement), is incorporated into and deemed part of the Agreement in all respects.

• Additional Terms applicable to the Transaction Adjustments applicable to the Transaction: Potential Adjustment Events: Notwithstanding Section 11.2(e) of the Equity Definitions, a “Potential Adjustment Event” means an occurrence of any event or condition, as set forth in any Dilution Adjustment Provision, that would result in an adjustment pursuant to the Indenture to the “Conversion Rate” or the composition of a “unit of Reference Property” or to any “Last Reported Sale Price”, “Daily VWAP,” “Daily Conversion Value” or “Daily Settlement Amount” (each as defined in the Indenture). For the avoidance of doubt, Dealer shall not have any delivery or payment obligation hereunder, and no adjustment shall be made to the terms of the Transaction, on account of (x) any distribution of cash, property or securities by Counterparty to holders of the Convertible Notes (upon conversion or otherwise) or (y) any other transaction in which holders of the Convertible Notes are entitled to participate, in each case, in lieu of an adjustment under the Indenture of the type referred to in the immediately preceding sentence (including, without limitation, pursuant to the fourth sentence of Section 14.04(c) of the Indenture or the fourth sentence of Section 14.04(d) of the Indenture). Method of Adjustment: Calculation Agent Adjustment, which means that, notwithstanding Section 11.2(c) of the Equity Definitions, upon any Potential Adjustment Event, the Calculation Agent, acting in good faith and in a commercially reasonable manner, shall make a corresponding adjustment to any one or more of the Strike Price, Number of Options, Option Entitlement and any other variable relevant to the exercise, settlement or payment for the Transaction. Notwithstanding the foregoing and “Consequences of Merger Events / Tender Offers” below, if the Calculation Agent in good faith disagrees with any adjustment to the Convertible Notes that involves an exercise of discretion by Counterparty or its board of directors (including, without limitation, pursuant to Section 14.05 of the Indenture, Section 14.07 of the Indenture or any supplemental indenture entered into thereunder or the determination of the fair value of any securities, property, rights or other assets), then in each such case, the Calculation Agent will determine the adjustment to be made to any one or more of the Strike Price, Number of Options, Option Entitlement and any other variable relevant to the exercise, settlement or payment for the Transaction in a commercially reasonable manner taking into account the relevant provisions of the Indenture; provided that, notwithstanding the foregoing, if any Potential Adjustment Event occurs during the Settlement Averaging Period but no adjustment was made to any Convertible Note under the Indenture because the relevant Holder (as such term is defined in the Indenture) was deemed to be a record owner of the underlying Shares on the related Conversion Date, then the Calculation Agent shall make a commercially reasonable adjustment, as determined by it, to the terms hereof in order to account for such Potential Adjustment Event. Dilution Adjustment Provisions: Sections 14.04(a), (b), (c), (d) and (e) and Section 14.05 of the Indenture. Extraordinary Events applicable to the Transaction: Merger Events: Applicable; provided that notwithstanding Section 12.1(b) of the Equity Definitions, a “Merger Event” means the occurrence of any event or condition set forth in the definition of “Merger Event” in Section 14.07 of the Indenture. Tender Offers: Applicable; provided that notwithstanding Section 12.1(d) of the Equity Definitions, a “Tender Offer” means the occurrence of any event or condition set forth in Section 14.04(e) of the Indenture. Consequences of Merger Events / Tender Offers: Notwithstanding Section 12.2 and Section 12.3 of the Equity Definitions, upon the occurrence of a Merger Event or a Tender Offer, the Calculation Agent shall make a corresponding adjustment in respect of any adjustment under the Indenture to any one or more of the nature of the Shares (in the case of a Merger Event), Strike Price, Number of Options, Option Entitlement and any other variable relevant to the exercise, settlement or payment for the Transaction, subject to the second paragraph under “Method of Adjustment”; provided, however, that such adjustment shall be made without regard to any adjustment to the Conversion Rate pursuant to any Excluded Provision; provided further that if (x) with respect to any Merger Event or any Tender Offer, (i) (A) the consideration for the Shares includes (or, at the option of a holder of Shares, may include) shares of an entity or person that is not a corporation or is not organized under the laws of the United States, any State thereof or the District of Columbia or (B) the Counterparty to the Transaction following such Merger Event or Tender Offer will not be a corporation organized under the laws of the United States, any State thereof or the District of Columbia and (ii) Dealer determines at any time following the occurrence of such Merger Event or Tender Offer that (A) such Merger Event or Tender Offer has had or will have an adverse effect on Dealer’s rights and obligations under the Transaction or (B) Dealer will incur or has incurred an increased (as compared with circumstances existing on the Trade Date) amount of tax, duty, expense or fee to (1) acquire, establish, re-establish, substitute, maintain, unwind or dispose of any transaction(s) or asset(s) constituting a commercially reasonable hedge position in respect of the economic risk of entering into and performing its obligations with respect to the Transaction or (2) realize, recover or remit the proceeds of any transaction(s) or asset(s) constituting a commercially reasonable hedge position in respect of the economic risk of entering into and performing its obligations with respect to the Transaction or (y) a Prohibited Foreign Transaction occurs, then, in the case of either clause (x) or clause (y), Cancellation and Payment (Calculation Agent Determination) may apply at Dealer’s commercially reasonable election; provided further that, for the avoidance of doubt, adjustments shall be made pursuant to the provisions set forth above regardless of whether any Merger Event or Tender Offer results in a Conversion Date occurring prior to the Free Convertibility Date (any such conversion, an “Early Conversion”).

• Payment Terms and Billing (1) Payment shall be made only after the Client Agency receives and accepts the Goods or Services and after it receives a properly completed invoice. Unless otherwise specified in the Contract, payment for all accepted Goods or Services shall be due within forty-five (45) days after acceptance of the Goods or Services, or thirty (30) days if the Contractor is a certified small contractor or minority business enterprise as defined in Conn. Gen.

• Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.

• Payment Terms and Funding Out Clause 1 Payment Terms:

• SETTLEMENT TERMS AND CONDITIONS Contour is willing to resolve the violations cited herein by entering into this Agreement and freely and voluntarily waives its right to a hearing under Banking Law Sections 44 and 598. Therefore, in consideration of the promises and covenants set forth herein, the Settling Parties agree, as follows: 1. Contour shall not: a. Under any name or designation conduct or transact business in this state at any physical location that has not been approved by the Superintendent; b. Under any name or designation conduct or transact business in this state through the use of any website or domain name that has not been approved by the Superintendent; c. Conduct or transact business under any name or designation other than that shown on its license or branch certificate; d. Assign mortgage loan originators to locations that are not licensed by the Superintendent; e. Engage in net branching or offer net branching opportunities in violation of the Department’s prohibition against net branching; f. Transfer or assign its mortgage banker license; g. Engage in conduct prohibited by Part 38 of the General Regulations. 2. Contour agrees to take all necessary steps to ensure its compliance with all applicable federal and state laws, regulations, supervisory requirements, and guidance letters relating to its mortgage business, including but not limited to: a. Complying with the requirements of Banking Law Articles 12-D and 12- E, Part 420 of the Superintendent’s Regulations, and Part 38 of the General Regulations; b. Assigning mortgage loan originators only to locations licensed by the Superintendent, and displaying the license for each mortgage loan originator working at such location; c. Providing the proper oversight and supervision of each individual who becomes employed by, or affiliated as an independent contractor of or consultant for, Contour; and d. Maintaining books and records in a manner that will enable the Superintendent to determine whether Contour is complying with all applicable federal and state laws, regulations, supervisory requirements, and guidance letters. 3. Contour agrees to develop a comprehensive operations manual governing its day-to-day operations, which shall, at a minimum, address the: a. Establishment of new business locations; b. Use of business names and designations; c. Activities and supervision of employees, independent contractors, and consultants; and d. Maintenance of books and records. 4. Contour agrees to develop a written compliance manual designed to ensure compliance with all applicable federal and state laws, regulations, supervisory requirements, and guidance letters. The manual shall, at a minimum, address: a. The designation of an individual responsible for monitoring compliance with all applicable laws, regulations, supervisory requirements, and guidance letters; b. Prohibited conduct as described by Section 38.7 of the General Regulations; c. The duties of an originating entity as described by Part 420 of the Superintendent’s Regulations; d. Reporting requirements as described by Part 420 of the Superintendent’s Regulations; e. Use of business names and designations, domain names, and websites; f. The duties and responsibilities of employees, independent contractors, and consultants; and g. A compliance training program for employees and independent contractors. 5. Within ninety (90) days from the effective date of this Agreement, Xxxxxxx agrees to submit drafts of its operations and compliance manuals to the Department. 6. Within one hundred twenty (120) days from the effective date of this Agreement, Xxxxxxx agrees to submit copies of its final operations and compliance manuals to the Department together with a letter from an authorized officer of Contour indicating his or her approval of said manuals. 7. Contour agrees that its mortgage banking activities will be subject to examinations semi-annually for a twenty-four-month period following the execution of this Agreement. 8. Contour agrees to pay a fine of $20,000. Contour further agrees that such payment will be made in immediately available funds in accordance with Department payment instructions.

• Price Schedule, Payment Terms and Billing, and Price Adjustments (a) Price Schedule: Price Schedule under this Contract is set forth in Exhibit B.

• ONLINE TERMS AND CONDITIONS The Terms and Conditions specified herein shall govern all members of xxx.xxxxxxxxxxxxxxxx.xxx (“EHSAN AUCTIONEERS SDN. BHD. website”).