Existing Products Except as set forth below, Contractor shall retain all rights, title and interest in Existing Products.
Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.
TIPS Sales and Supplemental Agreements If awarded, when making a sale under this awarded contract, the terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, defects, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, AIA Contract, Invoice, etc.) (“Supplemental Agreement” as used herein) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement. The Supplemental Agreement shall dictate the scope of services, the project delivery expectations, the scheduling of projects and milestones, the support requirements, and all other terms applicable to the specific sale(s) between the Vendor and the TIPS Member.
ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.
Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).
Assignment; Sales; Advance Facilities (a) A Servicer is hereby authorized to enter into a financing or other facility (any such arrangement, an "Advance Facility"), the documentation for which complies with Section 10.07(e) below, under which (1) such Servicer assigns or pledges its rights under this Agreement to be reimbursed for any or all Advances to (i) a Person, which may be a special-purpose bankruptcy-remote entity (an "SPV"), (ii) a Person, which may simultaneously assign or pledge such rights to an SPV or (iii) a lender (a "Lender"), which, in the case of any Person or SPV of the type described in either of the preceding clauses (i) or (ii), may directly or through other assignees and/or pledgees, assign or pledge such rights to a Person, which may include a trustee acting on behalf of holders of debt instruments (any such Person or any such Lender, an "Advance Financing Person"), and/or (2) an Advance Financing Person agrees to fund all the Advances required to be made by such Servicer pursuant to this Agreement. No consent of the Trustee, Certificateholders or any other party shall be required before a Servicer may enter into an Advance Facility nor shall the Trustee or the Certificateholders be a third party beneficiary of any obligation of an Advance Financing Person to a Servicer. Notwithstanding the existence of any Advance Facility under which an Advance Financing Person agrees to fund Advances, (A) the Servicer (i) shall remain obligated pursuant to this Agreement to make Advances pursuant to and as required by this Agreement and (ii) shall not be relieved of such obligations by virtue of such Advance Facility and (B) neither the Advance Financing Person nor any Servicer's Assignee (as hereinafter defined) shall have any right to proceed against or otherwise contact any Mortgagor for the purpose of collecting any payment that may be due with respect to any related Mortgage Loan or enforcing any covenant of such Mortgagor under the related Mortgage Loan documents.
(b) If a Servicer enters into an Advance Facility, such Servicer and the related Advance Financing Person shall deliver to the Trustee at the address set forth in Section 10.05 hereof a written notice (an "Advance Facility Notice"), stating (a) the identity of the Advance Financing Person and (b) the identity of the Person (the "Servicer's Assignee") that will, subject to Section 10.07(c) hereof, have the right to make withdrawals from the Collection Account pursuant to Section 3.11 hereof to reimburse previously unreimbursed Advances ("Advance Reimbursement Amounts"). Advance Reimbursement Amounts (i) shall consist solely of amounts in respect of Advances for which such Servicer would be permitted to reimburse itself in accordance with Section 3.11 hereof, assuming such Servicer had made the related Advance(s) and (ii) shall not consist of amounts payable to a successor Servicer in accordance with Section 3.11 hereof to the extent permitted under Section 10.07(e) below.
(c) Notwithstanding the existence of an Advance Facility, a Servicer, on behalf of the Advance Financing Person and the Servicer's Assignee, shall be entitled to receive reimbursements of Advances in accordance with Section 3.11 hereof, which entitlement may be terminated by the Advance Financing Person pursuant to a written notice to the Trustee in the manner set forth in Section 10.05 hereof. Upon receipt of such written notice, the Servicer shall no longer be entitled to receive reimbursement for any Advance Reimbursement Amounts and the Servicer's Assignee shall immediately have the right to receive from the Collection Account all Advance Reimbursement Amounts. Notwithstanding the foregoing, and for the avoidance of doubt, (i) a Servicer and/or the Servicer's Assignee shall only be entitled to reimbursement of Advance Reimbursement Amounts hereunder from withdrawals from the Collection Account pursuant to Section 3.11 of this Agreement and shall not otherwise be entitled to make withdrawals of, or receive, amounts that shall be deposited in the Distribution Account pursuant to Sections 3.11(a)(i) and 3.27(b) hereof, and (ii) none of the Trustee or the Certificateholders shall have any right to, or otherwise be entitled to, receive any Advance Reimbursement Amounts to which the Servicer or Servicer's Assignee, as applicable, shall be entitled pursuant to Section 3.11 hereof. An Advance Facility may be terminated by the joint written direction of the Servicer and the related Advance Financing Person. Written notice of such termination shall be delivered to the Trustee in the manner set forth in Section 10.05 hereof. None of the Depositor or the Trustee shall, as a result of the existence of any Advance Facility, have any additional duty or liability with respect to the calculation or payment of any Advance Reimbursement Amount, nor, as a result of the existence of any Advance Facility, shall the Depositor or the Trustee have any additional responsibility to track or monitor the administration of the Advance Facility or the payment of Advance Reimbursement Amounts to the Servicer's Assignee. The Servicer shall indemnify the Depositor, the Trustee, any successor Servicer and the Trust Fund for any claim, loss, liability or damage resulting from any claim by the related Advance Financing Person, except to the extent that such claim, loss, liability or damage resulted from or arose out of negligence, recklessness or willful misconduct on the part of the Depositor, the Trustee or any successor Servicer, as the case may be, or failure by the successor Servicer or the Trustee, as the case may be, to remit funds as required by this Agreement. The Servicer shall maintain and provide to any successor Servicer and, upon request, the Trustee a detailed accounting on a loan-by-loan basis as to amounts advanced by, pledged or assigned to, and reimbursed to any Advance Financing Person. The successor Servicer shall be entitled to rely on any such information provided by the predecessor Servicer, and the successor Servicer shall not be liable for any errors in such information.
(d) An Advance Financing Person who receives an assignment or pledge of rights to receive Advance Reimbursement Amounts and/or whose obligations are limited to the funding of Advances pursuant to an Advance Facility shall not be required to meet the criteria for qualification as a Subservicer.
(e) As between a predecessor Servicer and its Advance Financing Person, on the one hand, and a successor Servicer and its Advance Financing Person, if any, on the other hand, Advance Reimbursement Amounts on a loan-by-loan basis with respect to each Mortgage Loan as to which an Advance shall have been made and be outstanding shall be allocated on a "first-in, first out" basis. In the event the Servicer's Assignee shall have received some or all of an Advance Reimbursement Amount related to Advances that were made by a Person other than such predecessor Servicer or its related Advance Financing Person in error, then such Servicer's Assignee shall be required to remit any portion of such Advance Reimbursement Amount to each Person entitled to such portion of such Advance Reimbursement Amount. Without limiting the generality of the foregoing, the Servicer shall remain entitled to be reimbursed by the Advance Financing Person for all Advances funded by the Servicer to the extent the related Advance Reimbursement Amounts have not been assigned or pledged to such Advance Financing Person or Servicer's Assignee.
(f) For purposes of any Officer's Certificate of the Servicer made pursuant to Section 4.01(d), any Nonrecoverable P&I Advance or Nonrecoverable Servicing Advance referred to therein may have been made by such Servicer or any predecessor Servicer. In making its determination that any Advance or Servicing Advance theretofore made has become a Nonrecoverable P&I Advance or Nonrecoverable Servicing Advance, the Servicer shall apply the same criteria in making such determination regardless of whether such Advance or Servicing Advance shall have been made by the Servicer or any predecessor Servicer.
(g) Any amendment to this Section 10.07 or to any other provision of this Agreement that may be necessary or appropriate to effect the terms of an Advance Facility as described generally in this Section 10.07, including amendments to add provisions relating to a successor Servicer, may be entered into by the Trustee, the Depositor and the Servicer without the consent of any Certificateholder, provided such amendment complies with Section 10.01 hereof. All reasonable costs and expenses (including attorneys' fees) of each party hereto of any such amendment shall be borne solely by the Servicer. The parties hereto hereby acknowledge and agree that: (a) the Advances financed by and/or pledged to an Advance Financing Person under any Advance Facility are obligations owed to the Servicer payable only from the cash flows and proceeds received under this Agreement for reimbursement of Advances only to the extent provided herein, and the Trustee and the Trust are not, as a result of the existence of any Advance Facility, obligated or liable to repay any Advances financed by the Advance Financing Person; (b) the Servicer will be responsible for remitting to the Advance Financing Person the applicable amounts collected by it as reimbursement for Advances funded by the Advance Financing Person, subject to the provisions of this Agreement; and (c) the Trustee shall not have any responsibility to track or monitor the administration of the financing arrangement between the Servicer and any Advance Financing Person.
Supply Agreement Seller and Buyer, or their Affiliates, shall have executed the Supply Agreement.
Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions.
(b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.
Additional Products Upon satisfying the minimum order requirements above, Enrolled Affiliate may order Additional Products.
Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.
(b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.
