Common use of Physical File Characteristics Clause in Contracts

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone for the purpose of data transmission. Where a dedicated line is required, Comcast Phone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast Phone. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone will be the responsibility of Comcast Phone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone end for the purpose of data transmission will be the responsibility of Comcast Phone.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone CLEC-1 via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone CLEC-1 for the purpose of data transmission. Where a dedicated line is required, Comcast Phone CLEC-1 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone CLEC-1 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneCLEC-1. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone CLEC-1 will be the responsibility of Comcast PhoneCLEC-1. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone CLEC-1 end for the purpose of data transmission will be the responsibility of Comcast PhoneCLEC-1.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone OnePoint via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone OnePoint for the purpose of data transmission. Where a dedicated line is required, Comcast Phone OnePoint will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone OnePoint will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneOnePoint. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone OnePoint will be the responsibility of Comcast PhoneOnePoint. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone OnePoint end for the purpose of data transmission will be the responsibility of Comcast PhoneOnePoint.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone SouthEast via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone SouthEast for the purpose of data transmission. Where a dedicated line is required, Comcast Phone SouthEast will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone SouthEast will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneSouthEast. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone SouthEast will be the responsibility of Comcast PhoneSouthEast. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone SouthEast end for the purpose of data transmission will be the responsibility of Comcast PhoneSouthEast.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone BSE via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone BSE for the purpose of data transmission. Where a dedicated line is required, Comcast Phone BSE will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone BSE will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneBSE. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone BSE will be the responsibility of Comcast PhoneBSE. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone BSE end for the purpose of data transmission will be the responsibility of Comcast PhoneBSE.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Global Connection via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone Global Connection for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Global Connection will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Global Connection will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneGlobal Connection. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Global Connection will be the responsibility of Comcast PhoneGlobal Connection. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Global Connection end for the purpose of data transmission will be the responsibility of Comcast PhoneGlobal Connection.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone e.spire via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone e.spire for the purpose of data transmission. Where a dedicated line is required, Comcast Phone e.spire will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone e.spire will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast Phonee.spire. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone e.spire will be the responsibility of Comcast Phonee.spire. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone e.spire end for the purpose of data transmission will be the responsibility of Comcast Phonee.spire.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone TCI via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone TCI for the purpose of data transmission. Where a dedicated line is required, Comcast Phone TCI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone TCI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTCI. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone TCI will be the responsibility of Comcast PhoneTCI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone TCI end for the purpose of data transmission will be the responsibility of Comcast PhoneTCI.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone ICG via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone ICG for the purpose of data transmission. Where a dedicated line is required, Comcast Phone ICG will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone ICG will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneICG. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone ICG will be the responsibility of Comcast PhoneICG. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone ICG end for the purpose of data transmission will be the responsibility of Comcast PhoneICG.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone VELOCITY via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone VELOCITY for the purpose of data transmission. Where a dedicated line is required, Comcast Phone VELOCITY will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone VELOCITY will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneVELOCITY. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone VELOCITY will be the responsibility of Comcast PhoneVELOCITY. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone VELOCITY end for the purpose of data transmission will be the responsibility of Comcast PhoneVELOCITY.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Pinnacle via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Pinnacle for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Pinnacle will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Pinnacle will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePinnacle. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Pinnacle will be the responsibility of Comcast PhonePinnacle. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Pinnacle end for the purpose of data transmission will be the responsibility of Comcast PhonePinnacle.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Choctaw via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Choctaw for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Choctaw will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Choctaw will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneChoctaw. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Choctaw will be the responsibility of Comcast PhoneChoctaw. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Choctaw end for the purpose of data transmission will be the responsibility of Comcast PhoneChoctaw.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone VarTec via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone VarTec for the purpose of data transmission. Where a dedicated line is required, Comcast Phone VarTec will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone VarTec will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneVarTec. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone VarTec will be the responsibility of Comcast PhoneVarTec. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone VarTec end for the purpose of data transmission will be the responsibility of Comcast PhoneVarTec.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File 4.7.2.1 ODUF will be distributed to Comcast Phone TriStar via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 4.7.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone TriStar for the purpose of data transmission. Where a dedicated line is required, Comcast Phone TriStar will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone TriStar will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTriStar. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone TriStar will be the responsibility of Comcast PhoneTriStar. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone TriStar’s end for the purpose of data transmission will be the responsibility of Comcast PhoneTriStar.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone NewSouth via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone NewSouth for the purpose of data transmission. Where a dedicated line is required, Comcast Phone NewSouth will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone NewSouth will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneNewSouth. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone NewSouth will be the responsibility of Comcast PhoneNewSouth. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone NewSouth end for the purpose of data transmission will be the responsibility of Comcast PhoneNewSouth.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Comm South via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone Comm South for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Comm South will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Comm South will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneComm South. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Comm South will be the responsibility of Comcast PhoneComm South. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Comm South end for the purpose of data transmission will be the responsibility of Comcast PhoneComm South.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Light Networks via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Light Networks for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Light Networks will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Light Networks will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneLight Networks. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Light Networks will be the responsibility of Comcast PhoneLight Networks. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Light Networks end for the purpose of data transmission will be the responsibility of Comcast PhoneLight Networks.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Fast Phones via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone Fast Phones for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Fast Phones will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Fast Phones will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneFast Phones. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Fast Phones will be the responsibility of Comcast PhoneFast Phones. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Fast Phones end for the purpose of data transmission will be the responsibility of Comcast PhoneFast Phones.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Express Title via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Express Title for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Express Title will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Express Title will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneExpress Title. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Express Title will be the responsibility of Comcast PhoneExpress Title. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Express Title end for the purpose of data transmission will be the responsibility of Comcast PhoneExpress Title.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Edge Connections via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Edge Connections for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Edge Connections will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Edge Connections will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneEdge Connections. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Edge Connections will be the responsibility of Comcast PhoneEdge Connections. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Edge Connections end for the purpose of data transmission will be the responsibility of Comcast PhoneEdge Connections.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Colmena via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Colmena for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Colmena will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Colmena will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneColmena. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Colmena will be the responsibility of Comcast PhoneColmena. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Colmena end for the purpose of data transmission will be the responsibility of Comcast PhoneColmena.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone ALLTEL via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone ALLTEL for the purpose of data transmission. Where a dedicated line is required, Comcast Phone ALLTEL will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone ALLTEL will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneALLTEL. Additionally, all message toll charges associated with the use of Version1Q00:3/6/00 the dial circuit by Comcast Phone ALLTEL will be the responsibility of Comcast PhoneALLTEL. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone ALLTEL end for the purpose of data transmission will be the responsibility of Comcast PhoneALLTEL.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Colmena via an agreed medium with CONNECT:: Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (circuits( private line or dial-up) will may be required between BellSouth and Comcast Phone Colmena for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Colmena will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Colmena will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneColmena. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Colmena will be the responsibility of Comcast PhoneColmena. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Colmena end for the purpose of data transmission will be the responsibility of Comcast PhoneColmena.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone DV2 via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone DV2 for the purpose of data transmission. Where a dedicated line is required, Comcast Phone DV2 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone DV2 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneDV2. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone DV2 will be the responsibility of Comcast PhoneDV2. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone DV2 end for the purpose of data transmission will be the responsibility of Comcast PhoneDV2.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Level 3 via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Level 3 for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Level 3 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Level 3 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneLevel 3. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Level 3 will be the responsibility of Comcast PhoneLevel 3. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Level 3 end for the purpose of data transmission will be the responsibility of Comcast PhoneLevel 3.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Oltronics via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Oltronics for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Oltronics will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Oltronics will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneOltronics. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Oltronics will be the responsibility of Comcast PhoneOltronics. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Oltronics end for the purpose of data transmission will be the responsibility of Comcast PhoneOltronics.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Arrow via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Arrow for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Arrow will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Arrow will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneArrow. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Arrow will be the responsibility of Comcast PhoneArrow. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Arrow end for the purpose of data transmission will be the responsibility of Comcast PhoneArrow.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Advantel via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Advantel for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Advantel will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Advantel will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneAdvantel. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Advantel will be the responsibility of Comcast PhoneAdvantel. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Advantel end for the purpose of data transmission will be the responsibility of Comcast PhoneAdvantel.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Xxxx via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Xxxx for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Xxxx will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Xxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneXxxx . Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Xxxx will be the responsibility of Comcast PhoneXxxx . Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Xxxx end for the purpose of data transmission will be the responsibility of Comcast PhoneXxxx .

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone BHN via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth AT&T and Comcast Phone BHN for the purpose of data transmission. Where a dedicated line is required, Comcast Phone BHN will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone AT&T. BHN will also be responsible for any charges associated with this line. Equipment required on the BellSouth AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth AT&T data center by BellSouth AT&T and the associated charges assessed to Comcast PhoneBHN. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone BHN will be the responsibility of Comcast PhoneBHN. Associated equipment on the BellSouth AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone BHN end for the purpose of data transmission will be the responsibility of Comcast PhoneBHN.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File ODUF will be distributed to Comcast Phone Rhythms via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Rhythms for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Rhythms will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Rhythms will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneRhythms. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Rhythms will be the responsibility of Comcast PhoneRhythms. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Rhythms’ end for the purpose of data transmission will be the responsibility of Comcast PhoneRhythms.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Xxxxxxx via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Xxxxxxx for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Xxxxxxx will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Xxxxxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneXxxxxxx. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Xxxxxxx will be the responsibility of Comcast PhoneXxxxxxx. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Xxxxxxx end for the purpose of data transmission will be the responsibility of Comcast PhoneXxxxxxx.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Express Connection via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone Express Connection for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Express Connection will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Express Connection will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneExpress Connection. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Express Connection will be the responsibility of Comcast PhoneExpress Connection. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Express Connection end for the purpose of data transmission will be the responsibility of Comcast PhoneExpress Connection.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Telstar via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone Telstar for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Telstar will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Telstar will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTelstar. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Telstar will be the responsibility of Comcast PhoneTelstar. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Telstar end for the purpose of data transmission will be the responsibility of Comcast PhoneTelstar.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Wakul via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Wakul for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Wakul will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Xxxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneWakul. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Wakul will be the responsibility of Comcast PhoneWakul. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Wakul end for the purpose of data transmission will be the responsibility of Comcast PhoneWakul.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone NA Communications via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone NA Communications for the purpose of data transmission. Where a dedicated line is required, Comcast Phone NA Communications will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone NA Communications will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneNA Communications. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone NA Communications will be the responsibility of Comcast PhoneNA Communications. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone NA Communications end for the purpose of data transmission will be the responsibility of Comcast PhoneNA Communications.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone MPOWER via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone MPOWER for the purpose of data transmission. Where a dedicated line is required, Comcast Phone MPOWER will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone XXXXXX will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneMPOWER. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone MPOWER will be the responsibility of Comcast PhoneMPOWER. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone MPOWER end for the purpose of data transmission will be the responsibility of Comcast PhoneMPOWER.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone CCI via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone CCI for the purpose of data transmission. Where a dedicated line is required, Comcast Phone CCI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone CCI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneCCI. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone CCI will be the responsibility of Comcast PhoneCCI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone CCI end for the purpose of data transmission will be the responsibility of Comcast PhoneCCI.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Intermedia via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Intermedia for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Intermedia will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Intermedia will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneIntermedia. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Intermedia will be the responsibility of Comcast PhoneIntermedia. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Intermedia end for the purpose of data transmission will be the responsibility of Comcast PhoneIntermedia.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Preferred via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Preferred for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Preferred will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Preferred will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePreferred. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Preferred will be the responsibility of Comcast PhonePreferred. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Preferred end for the purpose of data transmission will be the responsibility of Comcast PhonePreferred.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Pyramid via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Pyramid for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Pyramid will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Pyramid will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePyramid. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Pyramid will be the responsibility of Comcast PhonePyramid. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Pyramid end for the purpose of data transmission will be the responsibility of Comcast PhonePyramid.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Network Telephone via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Network Telephone for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Network Telephone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Network Telephone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneNetwork Telephone. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Network Telephone will be the responsibility of Comcast PhoneNetwork Telephone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Network Telephone end for the purpose of data transmission will be the responsibility of Comcast PhoneNetwork Telephone.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File ODUF will be distributed to Comcast Phone GulfPines via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone GulfPines for the purpose of data transmission. Where a dedicated line is required, Comcast Phone GulfPines will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone GulfPines will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneGulfPines. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone GulfPines will be the responsibility of Comcast PhoneGulfPines. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone GulfPines end for the purpose of data transmission will be the responsibility of Comcast PhoneGulfPines.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone TEL3 via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone TEL3 for the purpose of data transmission. Where a dedicated line is required, Comcast Phone TEL3 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone TEL3 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTEL3. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone TEL3 will be the responsibility of Comcast PhoneTEL3. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone TEL3 end for the purpose of data transmission will be the responsibility of Comcast PhoneTEL3.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Teligent via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Teligent for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Teligent will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Teligent will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTeligent. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Teligent will be the responsibility of Comcast PhoneTeligent. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Teligent end for the purpose of data transmission will be the responsibility of Comcast PhoneTeligent.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Knology via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Knology for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Knology will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Knology will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneKnology. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Knology will be the responsibility of Comcast PhoneKnology. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Knology end for the purpose of data transmission will be the responsibility of Comcast PhoneKnology.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Accutel via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Accutel for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Accutel will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Accutel will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneAccutel. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Accutel will be the responsibility of Comcast PhoneAccutel. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Accutel end for the purpose of data transmission will be the responsibility of Comcast PhoneAccutel.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Premiere via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Premiere for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Premiere will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Premiere will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePremiere. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Premiere will be the responsibility of Comcast PhonePremiere. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Premiere end for the purpose of data transmission will be the responsibility of Comcast PhonePremiere.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone InterCept via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone InterCept for the purpose of data transmission. Where a dedicated line is required, Comcast Phone InterCept will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone InterCept will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneInterCept. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone InterCept will be the responsibility of Comcast PhoneInterCept. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone InterCept end for the purpose of data transmission will be the responsibility of Comcast PhoneInterCept.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Comm South via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Comm South for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Comm South will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Comm South will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneComm South. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Comm South will be the responsibility of Comcast PhoneComm South. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Comm South end for the purpose of data transmission will be the responsibility of Comcast PhoneComm South.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Electronic Telco via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone Electronic Telco for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Electronic Telco will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Electronic Telco will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneElectronic Telco. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Electronic Telco will be the responsibility of Comcast PhoneElectronic Telco. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Electronic Telco end for the purpose of data transmission will be the responsibility of Comcast PhoneElectronic Telco.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Access One via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Access One for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Access One will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Access One will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated Version1Q00:2/17/00 charges assessed to Comcast PhoneAccess One. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Access One will be the responsibility of Comcast PhoneAccess One. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Access One end for the purpose of data transmission will be the responsibility of Comcast PhoneAccess One.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone New Access via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone New Access for the purpose of data transmission. Where a dedicated line is required, Comcast Phone New Access will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone New Access will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneNew Access. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone New Access will be the responsibility of Comcast PhoneNew Access. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone New Access end for the purpose of data transmission will be the responsibility of Comcast PhoneNew Access.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone VVI via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone VVI for the purpose of data transmission. Where a dedicated line is required, Comcast Phone VVI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone VVI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneVVI. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone VVI will be the responsibility of Comcast PhoneVVI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone VVI end for the purpose of data transmission will be the responsibility of Comcast PhoneVVI.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Pathnet via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Pathnet for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Pathnet will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Pathnet will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePathnet. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Pathnet will be the responsibility of Comcast PhonePathnet. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Pathnet end for the purpose of data transmission will be the responsibility of Comcast PhonePathnet.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone VSSI via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone VSSI for the purpose of data transmission. Where a dedicated line is required, Comcast Phone VSSI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone VSSI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneVSSI. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone VSSI will be the responsibility of Comcast PhoneVSSI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone VSSI end for the purpose of data transmission will be the responsibility of Comcast PhoneVSSI.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Best Communications via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Best Communications for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Best Communications will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Best Communications will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneBest Communications. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Best Communications will be the responsibility of Comcast PhoneBest Communications. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Best Communications end for the purpose of data transmission will be the responsibility of Comcast PhoneBest Communications.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Personal Paging via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Personal Paging for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Personal Paging will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Personal Paging will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePersonal Paging. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Personal Paging will be the responsibility of Comcast PhonePersonal Paging. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone Personal Paging end for the purpose of data transmission will be the responsibility of Comcast PhonePersonal Paging.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Money To Go via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Money To Go for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Money To Go will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Money To Go will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneMoney To Go. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Money To Go will be the responsibility of Comcast PhoneMoney To Go. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Money To Go end for the purpose of data transmission will be the responsibility of Comcast PhoneMoney To Go.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone NuStar via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone NuStar for the purpose of data transmission. Where a dedicated line is required, Comcast Phone NuStar will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone NuStar will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneNuStar. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone NuStar will be the responsibility of Comcast PhoneNuStar. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone NuStar end for the purpose of data transmission will be the responsibility of Comcast PhoneNuStar.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Davco via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Davco for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Davco will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Davco will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneDavco. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Davco will be the responsibility of Comcast PhoneDavco. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Davco end for the purpose of data transmission will be the responsibility of Comcast PhoneDavco.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone aXessa via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone aXessa for the purpose of data transmission. Where a dedicated line is required, Comcast Phone aXessa will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone aXessa will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneaXessa. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone aXessa will be the responsibility of Comcast PhoneaXessa. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone aXessa end for the purpose of data transmission will be the responsibility of Comcast PhoneaXessa.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone TrustedNet via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone TrustedNet for the purpose of data transmission. Where a dedicated line is required, Comcast Phone TrustedNet will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone TrustedNet will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTrustedNet . Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone TrustedNet will be the responsibility of Comcast PhoneTrustedNet . Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone TrustedNet end for the purpose of data transmission will be the responsibility of Comcast PhoneTrustedNet .

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone AM-TEL via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone AM-TEL for the purpose of data transmission. Where a dedicated line is required, Comcast Phone AM-TEL will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone AM-TEL will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneAM- TEL. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone AM-TEL will be the responsibility of Comcast PhoneAM-TEL. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone AM- TEL end for the purpose of data transmission will be the responsibility of Comcast PhoneAM-TEL.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone TLX via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone TLX for the purpose of data transmission. Where a dedicated line is required, Comcast Phone TLX will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone TLX will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneTLX. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone TLX will be the responsibility of Comcast PhoneTLX. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone TLX end for the purpose of data transmission will be the responsibility of Comcast PhoneTLX.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone CI2 via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone CI2 for the purpose of data transmission. Where a dedicated line is required, Comcast Phone CI2 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone CI2 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneCI2. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone CI2 will be the responsibility of Comcast PhoneCI2. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone CI2 end for the purpose of data transmission will be the responsibility of Comcast PhoneCI2.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone ETS via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone ETS for the purpose of data transmission. Where a dedicated line is required, Comcast Phone ETS will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone ETS will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneETS. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone ETS will be the responsibility of Comcast PhoneETS. Associated equipment on the BellSouth end, Version1Q00:3/6/00 including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone ETS end for the purpose of data transmission will be the responsibility of Comcast PhoneETS.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone A-1 Mobile via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone A-1 Mobile for the purpose of data transmission. Where a dedicated line is required, Comcast Phone A-1 Mobile will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone A-1 Mobile will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneA-1 Mobile. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone A-1 Mobile will be the responsibility of Comcast PhoneA-1 Mobile. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone A-1 Mobile end for the purpose of data transmission will be the responsibility of Comcast PhoneA-1 Mobile.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Pointecom via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Pointecom for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Pointecom will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Pointecom will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePointecom. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Pointecom will be the responsibility of Comcast PhonePointecom. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Pointecom end for the purpose of data transmission will be the responsibility of Comcast PhonePointecom.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone Birch via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone Birch for the purpose of data transmission. Where a dedicated line is required, Comcast Phone Xxxxx will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone Xxxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneBirch. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone Xxxxx will be the responsibility of Comcast PhoneXxxxx. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Partiesparties. All equipment, including modems and software, that is required on Comcast Phone Birch end for the purpose of data transmission will be the responsibility of Comcast PhoneBirch.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone SPARDI via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone SPARDI for the purpose of data transmission. Where a dedicated line is required, Comcast Phone XXXXXX will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone XXXXXX will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneSPARDI. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone SPARDI will be the responsibility of Comcast PhoneSPARDI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone SPARDI end for the purpose of data transmission will be the responsibility of Comcast PhoneSPARDI.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone PowerNet via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone PowerNet for the purpose of data transmission. Where a dedicated line is required, Comcast Phone PowerNet will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone PowerNet will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhonePowerNet. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone PowerNet will be the responsibility of Comcast PhonePowerNet. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone PowerNet end for the purpose of data transmission will be the responsibility of Comcast PhonePowerNet.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone DPI via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Comcast Phone DPI for the purpose of data transmission. Where a dedicated line is required, Comcast Phone DPI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone DPI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneDPI. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone DPI will be the responsibility of Comcast PhoneDPI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone DPI end for the purpose of data transmission will be the responsibility of Comcast PhoneDPI.

Physical File Characteristics. 6.2.1 The Optional Daily Usage File will be distributed to Comcast Phone ZNC via an agreed medium with CONNECT:Direct being the preferred transport method. The ODUF feed Daily Usage Feed will be a variable block format (2476) with an LRECL of 2472. The data on the ODUF feed Daily Usage Feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will may be required between BellSouth and Comcast Phone ZNC for the purpose of data transmission. Where a dedicated line is required, Comcast Phone ZNC will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone ZNC will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast PhoneZNC. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone ZNC will be the responsibility of Comcast PhoneZNC. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual a case by case basis between the Parties. All equipment, including modems and software, that is required on Comcast Phone ZNC end for the purpose of data transmission will be the responsibility of Comcast PhoneZNC.