Common use of Physical File Characteristics Clause in Contracts

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 for the purpose of data transmission. Where a dedicated line is required, CLEC-1 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 will be the responsibility of CLEC-1. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s end for the purpose of data transmission will be the responsibility of CLEC-1.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 MPOWER over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1MPOWER’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 MPOWER for the purpose of data transmission. Where a dedicated line is required, CLEC-1 MPOWER will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 MPOWER will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1MPOWER. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 MPOWER will be the responsibility of CLEC-1MPOWER. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1MPOWER’s end for the purpose of data transmission will be the responsibility of CLEC-1MPOWER.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 SouthEast over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1SouthEast’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 SouthEast for the purpose of data transmission. Where a dedicated line is required, CLEC-1 SouthEast will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 SouthEast will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1SouthEast. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 SouthEast will be the responsibility of CLEC-1SouthEast. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1SouthEast’s end for the purpose of data transmission will be the responsibility of CLEC-1.SouthEast. Version 3Q00: 09/29/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Knology over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Knology’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Knology for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Knology will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Knology will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Knology. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Knology will be the responsibility of CLEC-1Knology. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1Knology’s end for the purpose of data transmission will be the responsibility of CLEC-1.Knology. Version 2Q00: 8/17/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Source One Communications over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Source One Communications’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-non- compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Source One Communications for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Source One Communications will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Source One Communications will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where Version 2Q01: 07/25/01 a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Source One Communications. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Source One Communications will be the responsibility of CLEC-1Source One Communications. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1Source One Communications’s end for the purpose of data transmission will be the responsibility of CLEC-1Source One Communications.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Xxxxx-4-U over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Xxxxx-4-U’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Xxxxx-4- U for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Xxxxx-4-U will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Xxxxx-4-U will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1. Xxxxx-4-U. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Xxxxx-4-U will be the responsibility of CLEC-1. Xxxxx-4-U. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1Xxxxx-4-U’s end for the purpose of data transmission will be the responsibility of CLEC-1.Xxxxx-4-U. Version 2Q01: 07/25/01

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Xxxxxxx over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1’s Xxxxxxx’x Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Xxxxxxx for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Xxxxxxx will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Xxxxxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Xxxxxxx. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Xxxxxxx will be the responsibility of CLEC-1Xxxxxxx. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s Xxxxxxx’x end for the purpose of data transmission will be the responsibility of CLEC-1Xxxxxxx.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 aXessa over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1aXessa’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 aXessa for the purpose of data transmission. Where a dedicated line is required, CLEC-1 aXessa will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 aXessa will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1aXessa. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 aXessa will be the responsibility of CLEC-1aXessa. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1aXessa’s end for the purpose of data transmission will be the responsibility of CLEC-1.aXessa. Version 2Q00: 8/17/00

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Teligent over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Teligent’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Teligent for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Teligent will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Teligent will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Teligent. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Teligent will be the responsibility of CLEC-1Teligent. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s Teligent end for the purpose of data transmission will be the responsibility of CLEC-1Teligent.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 A-1 Mobile over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1A-1 Mobile’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 A-1 Mobile for the purpose of data transmission. Where a dedicated line is required, CLEC-1 A-1 Mobile will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 A-1 Mobile will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1A-1 Mobile. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 A-1 Mobile will be the responsibility of CLEC-1A-1 Mobile. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1A-1 Mobile’s end for the purpose of data transmission will be the responsibility of CLEC-1A-1 Mobile.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 VELOCITY over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1VELOCITY’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 VELOCITY for the purpose of data transmission. Where a dedicated line is required, CLEC-1 VELOCITY will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 VELOCITY will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1VELOCITY. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 VELOCITY will be the responsibility of CLEC-1VELOCITY. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including Version 2Q00: 8/17/00 modems and software, that is required on CLEC-1VELOCITY’s end for the purpose of data transmission will be the responsibility of CLEC-1VELOCITY.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 VarTec over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1VarTec’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 VarTec for the purpose of data transmission. Where a dedicated line is required, CLEC-1 VarTec will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 VarTec will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1VarTec. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 VarTec will be the responsibility of CLEC-1VarTec. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1VarTec’s end for the purpose of data transmission will be the responsibility of CLEC-1.VarTec. Version 2Q01: 06/15/01

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Choctaw over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Choctaw’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Choctaw for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Choctaw will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Choctaw will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Choctaw. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Choctaw will be the responsibility of CLEC-1Choctaw. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1Choctaw’s end for the purpose of data transmission will be the responsibility of CLEC-1.Choctaw. Version 3Q00: 11/28/00

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Davco over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Davco’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Davco for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Davco will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Davco will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Davco. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Davco will be the responsibility of CLEC-1Davco. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s Davco end for the purpose of data transmission will be the responsibility of CLEC-1Davco.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Pointecom over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Pointecom’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Pointecom for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Pointecom will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Pointecom will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Pointecom. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Pointecom will be the responsibility of CLEC-1Pointecom. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1Pointecom’s end for the purpose of data transmission will be the responsibility of CLEC-1Pointecom.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 LS-One over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1LS-One’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 LS-One for the purpose of data transmission. Where a dedicated line is required, CLEC-1 LS-One will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 LS-One will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1LS-One. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 LS- One will be the responsibility of CLEC-1LS-One. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1LS-One’s end for the purpose of data transmission will be the responsibility of CLEC-1.LS-One. Version 2Q00: 8/17/00

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 TEL3 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1TEL3’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 TEL3 for the purpose of data transmission. Where a dedicated line is required, CLEC-1 TEL3 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 TEL3 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1TEL3. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 TEL3 will be the responsibility of CLEC-1TEL3. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s TEL3 end for the purpose of data transmission will be the responsibility of CLEC-1TEL3.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Comm South over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Comm South’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Comm South for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Comm South will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Comm South will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Comm South. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Comm South will be the responsibility of CLEC-1Comm South. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s Comm South end for the purpose of data transmission will be the responsibility of CLEC-1Comm South.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 InterCept over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1InterCept’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 InterCept for the purpose of data transmission. Where a dedicated line is required, CLEC-1 InterCept will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 InterCept will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1InterCept. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 InterCept will be the responsibility of CLEC-1InterCept. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1’s InterCept end for the purpose of data transmission will be the responsibility of CLEC-1InterCept.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 VarTec over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1VarTec’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 VarTec for the purpose of data transmission. Where a dedicated line is required, CLEC-1 VarTec will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 VarTec will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1VarTec. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 VarTec will be the responsibility of CLEC-1VarTec. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1VarTec’s end for the purpose of data transmission will be the responsibility of CLEC-1VarTec.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 MPOWER over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1MPOWER’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 MPOWER for the purpose of data transmission. Where a dedicated line is required, CLEC-1 MPOWER will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 XXXXXX will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1MPOWER. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 MPOWER will be the responsibility of CLEC-1MPOWER. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on CLEC-1MPOWER’s end for the purpose of data transmission will be the responsibility of CLEC-1MPOWER.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 AM-TEL over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1AM-TEL’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 AM- TEL for the purpose of data transmission. Where a dedicated line is required, CLEC-1 AM- TEL will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 AM-TEL will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1AM-TEL. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 AM-TEL will be the responsibility of CLEC-1AM-TEL. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1AM-TEL’s end for the purpose of data transmission will be the responsibility of CLEC-1.AM-TEL. Version 2Q01: 07/25/01

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Choctaw over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Choctaw’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Choctaw for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Choctaw will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Choctaw will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Choctaw. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Choctaw will be the responsibility of CLEC-1Choctaw. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1Choctaw’s end for the purpose of data transmission will be the responsibility of CLEC-1Choctaw.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to CLEC-1 Edge Connections over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among CLEC-1Edge Connections’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and CLEC-1 Edge Connections for the purpose of data transmission. Where a dedicated line is required, CLEC-1 Edge Connections will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. CLEC-1 Edge Connections will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to CLEC-1Edge Connections. Additionally, all message toll charges associated with the use of the dial circuit by CLEC-1 Edge Connections will be the responsibility of CLEC-1Edge Connections. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on CLEC-1Edge Connections’s end for the purpose of data transmission will be the responsibility of CLEC-1Edge Connections.