Common use of Physical File Characteristics Clause in Contracts

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among Preferred’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred for the purpose of data transmission. Where a dedicated line is required, Preferred will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Preferred. Additionally, all message toll charges associated with the use of the dial circuit by Preferred will be the responsibility of Preferred. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on Preferred’s end for the purpose of data transmission will be the responsibility of Preferred.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred Progressive over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredProgressive’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred Progressive for the purpose of data transmission. Where a dedicated line is required, Preferred Progressive will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred Progressive will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredProgressive. Additionally, all message toll charges associated with the use of the dial circuit by Preferred Progressive will be the responsibility of PreferredProgressive. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on Preferred’s Progressive end for the purpose of data transmission will be the responsibility of PreferredProgressive.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred NewSouth over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredNewSouth’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred NewSouth for the purpose of data transmission. Where a dedicated line is required, Preferred NewSouth will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred NewSouth will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredNewSouth. Additionally, all message toll charges associated with the use of the dial circuit by Preferred NewSouth will be the responsibility of PreferredNewSouth. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredNewSouth’s end for the purpose of data transmission will be the responsibility of PreferredNewSouth.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred Colmena over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredColmena’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred Colmena for the purpose of data transmission. Where a dedicated line is required, Preferred Colmena will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred Colmena will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredColmena. Additionally, all message toll charges associated with the use of the dial circuit by Preferred Colmena will be the responsibility of PreferredColmena. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredColmena’s end for the purpose of data transmission will be the responsibility of PreferredColmena.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred USA Digital over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredUSA Digital’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred USA Digital for the purpose of data transmission. Where a dedicated line is required, Preferred USA Digital will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred USA Digital will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredUSA Digital. Additionally, all message toll charges associated with the use of the dial circuit by Preferred USA Digital will be the responsibility of PreferredUSA Digital. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredUSA Digital’s end for the purpose of data transmission will be the responsibility of PreferredUSA Digital.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred ETS over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredETS’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred ETS for the purpose of data transmission. Where a dedicated line is required, Preferred ETS will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred ETS will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredETS. Additionally, all message toll charges associated with the use of the dial circuit by Preferred ETS will be the responsibility of PreferredETS. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredETS’s end for the purpose of data transmission will be the responsibility of PreferredETS.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred DV2 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredDV2’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred DV2 for the purpose of data transmission. Where a dedicated line is required, Preferred DV2 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred DV2 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredDV2. Additionally, all message toll charges associated with the use of the dial circuit by Preferred DV2 will be the responsibility of PreferredDV2. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredDV2’s end for the purpose of data transmission will be the responsibility of PreferredDV2.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred Birch over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among Preferred’s Xxxxx’x Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred Birch for the purpose of data transmission. Where a dedicated line is required, Preferred Xxxxx will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred Xxxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredBirch. Additionally, all message toll charges associated with the use of the dial circuit by Preferred Xxxxx will be the responsibility of PreferredXxxxx. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredBirch’s end for the purpose of data transmission will be the responsibility of PreferredBirch.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred VVI over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredVVI’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred VVI for the purpose of data transmission. Where a dedicated line is required, Preferred VVI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred VVI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredVVI. Additionally, all message toll charges associated with the use of the dial circuit by Preferred VVI will be the responsibility of PreferredVVI. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on PreferredVVI’s end for the purpose of data transmission will be the responsibility of PreferredVVI.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred CI2 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredCI2’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred CI2 for the purpose of data transmission. Where a dedicated line is required, Preferred CI2 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred CI2 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredCI2. Additionally, all message toll charges associated with the use of the dial circuit by Preferred CI2 will be the responsibility of PreferredCI2. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on PreferredCI2’s end for the purpose of data transmission will be the responsibility of Preferred.CI2. Version 3Q00: 11/28/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred CCI over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredCCI’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred CCI for the purpose of data transmission. Where a dedicated line is required, Preferred CCI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred CCI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredCCI. Additionally, all message toll charges associated with the use of the dial circuit by Preferred CCI will be the responsibility of PreferredCCI. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredCCI’s end for the purpose of data transmission will be the responsibility of PreferredCCI.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred TCI over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredTCI’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred TCI for the purpose of data transmission. Where a dedicated line is required, Preferred TCI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred TCI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredTCI. Additionally, all message toll charges associated with the use of the dial circuit by Preferred TCI will be the responsibility of PreferredTCI. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on Preferred’s TCI end for the purpose of data transmission will be the responsibility of PreferredTCI.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred Pathnet over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredPathnet’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred Pathnet for the purpose of data transmission. Where a dedicated line is required, Preferred Pathnet will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred Pathnet will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredPathnet. Additionally, all message toll charges associated with the use of the dial circuit by Preferred Pathnet will be the responsibility of PreferredPathnet. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredPathnet’s end for the purpose of data transmission will be the responsibility of PreferredPathnet.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred ALLTEL over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredALLTEL’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred ALLTEL for the purpose of data transmission. Where a dedicated line is required, Preferred ALLTEL will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred ALLTEL will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredALLTEL. Additionally, all message toll charges associated with the use of the dial circuit by Preferred byALLTEL will be the responsibility of PreferredALLTEL. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredALLTEL’s end for the purpose of data transmission will be the responsibility of PreferredALLTEL.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred Level 3 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredLevel 3’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred Level 3 for the purpose of data transmission. Where a dedicated line is required, Preferred Level 3 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred Level 3 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredLevel 3. Additionally, all message toll charges associated with the use of the dial circuit by Preferred Level 3 will be the responsibility of PreferredLevel 3. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredLevel 3’s end for the purpose of data transmission will be the responsibility of PreferredLevel 3.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred Colmena over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among Preferred’s Colmena's Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an withan LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred Colmena for the purpose of data transmission. Where a dedicated line is required, Preferred Colmena will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred Colmena will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredColmena. Additionally, all message toll charges associated with the use of the dial circuit by Preferred colmena will be the responsibility of PreferredColmena. Associated equipment on the BellSouth BelLSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on Preferred’s Colmena's end for the purpose of data transmission will be the responsibility of PreferredColmena.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to Preferred TLX over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among PreferredTLX’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Preferred TLX for the purpose of data transmission. Where a dedicated line is required, Preferred TLX will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Preferred TLX will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to PreferredTLX. Additionally, all message toll charges associated with the use of the dial circuit by Preferred TLX will be the responsibility of PreferredTLX. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on PreferredTLX’s end for the purpose of data transmission will be the responsibility of PreferredTLX.