Placement Schedule Sample Clauses

Placement Schedule. Provide schedule for each structure receiving overlay. • Provide placement sequence for each structure. Include paving lengths, widths, directions, and phase joint locations. Cold joints between passes within 6 inches of the indicated line striping locations or centered within a lane are not allowed. Limit joints as much as practical. Do not add joints, other than those indicated, unless approved.
AutoNDA by SimpleDocs
Placement Schedule. 1. Column I – a) Bachelor's Degree, plus two (2) years vocational experience, or b) an Associate’s Degree plus six (6) years vocational experience or a Community College Instructor's credential in a vocational/occupational subject matter area. 2. Column II a) Bachelor's Degree plus 30 units, or b) a Master's; or c) Community College Instructor's credential (fully-satisfied) in a vocational/occupational subject matter area and six (6) years vocational experience.
Placement Schedule. Date field practicum will begin: Date field practicum will end:
Placement Schedule. 1. The placement schedule attached to the Negotiated Agreement (Appendix I) is to be utilized for new teachers hired by the District based upon the teacher’s education and relevant experience.
Placement Schedule. A. The placement schedule shall be in accordance with the attached Appendix A. All employees covered by this agreement shall be paid in accordance with the provisions of this Appendix. B. With respect to the salary advancement as set forth in the placement schedule, a teacher must teach for at least one (1) full semester in the district to be qualified for an increase.

Related to Placement Schedule

  • Payment Schedule The purchase price for timber sold under this contract shall be paid in advance as follows: The first payment shall be paid within 30 days of the notification of high bid or before operating, whichever occurs first. The first payment shall be 10 percent of the total estimated bid value. The total estimated bid value shall be the sum obtained by multiplying the estimated timber volumes by the prices given in Section 44 less the amount of the project work. Cash bid deposits shall be applied to the initial payment. Subsequent payments shall be made in advance of timber removal when log hauling begins. Each payment shall be made before the value of timber removed equals one-half an advance payment or within the time period stated on the billing if PURCHASER is more than one-half of a payment in advance. The amount of each advance payment shall be calculated by dividing the total estimated bid value less the initial payment by 9; with the total estimated bid value being the sum obtained by multiplying the estimated timber volumes by the prices given in Section 44 less the amount of the project work. STATE may accept partial payment, upon written request, if logging is inactive. However, the full amount of advance payment is paid before logging resumes. Partial payment must be sufficient to maintain a payment deposit equal to one-half of a regular advance payment. The total purchase price shall be calculated after all log scale is reported by multiplying prices in Section 44 by the scaled volume. STATE shall refund any advance payment in excess of the total price, or PURCHASER shall pay any deficit within 30 days of notice. PURCHASER's deposit account shall not accrue interest payable to PURCHASER.

  • Development Schedule The Project shall substantially comply with the specific timetables and triggers for action set forth in Article 5 of this Agreement. The parties acknowledge that, as provided in G.S. 160A-400.25(b), the failure to meet a commencement or completion date shall not, in and of itself, constitute a material breach of this Agreement pursuant to G.S. 160A-400.27 but must be judged based upon the totality of the circumstances.

  • Delivery Schedule The Goods specified in the List of Goods are required to be delivered within the acceptable time range (after the earliest and before the final date, both dates inclusive) specified in Section V, Schedule of Requirements. No credit will be given to deliveries before the earliest date, and Tenders offering delivery after the final date shall be treated as non-responsive. Within this acceptable period, an adjustment of [insert the adjustment factor], will be added, for evaluation purposes only, to the Tender price of Tenders offering deliveries later than the “Earliest Delivery Date” specified in Section V, Schedule of Requirements.

  • Repayment Schedule The Semiannual Loan Payment shall be computed based upon the principal amount of the Loan plus the estimated Loan Service Fee and the principle of level debt service. The Semiannual Loan Payment amount may be adjusted, by amendment of this Agreement, based upon revised information. After the final disbursement of Loan proceeds, the Semiannual Loan Payment shall be based upon the actual Project costs, the actual Loan Service Fee and Loan Service Fee capitalized interest, if any, and actual dates and amounts of disbursements, taking into consideration any previous payments. Actual Project costs shall be established after the Department's inspection of the completed Project and associated records. The Department will deduct the Loan Service Fee and any associated interest from the first available repayments following the final amendment. Each Semiannual Loan Payment shall be in the amount of $82,812 until the payment amount is adjusted by amendment. The interest and Grant Allocation Assessment portions of each Semiannual Loan Payment shall be computed, using their respective rates, on the unpaid balance of the principal amount of the Loan, which includes Capitalized Interest. Interest (at the Financing Rate) also shall be computed on the estimated Loan Service Fee. The interest and Grant Allocation Assessment on the unpaid balance shall be computed as of the due date of each Semiannual Loan Payment. Semiannual Loan Payments shall be received by the Department beginning on March 15, 2019 and semiannually thereafter on September 15 and March 15 of each year until all amounts due hereunder have been fully paid. Funds transfer shall be made by electronic means. The Semiannual Loan Payment amount is based on the total amount owed of $3,312,465, which consists of the Loan principal and the estimated Loan Service Fee.

  • Contract Schedule The information set forth in the Contract Schedule is true and correct.

  • Shift Schedule The words "shift schedule" when used in this Agreement shall mean a timetable of the shifts and off days assigned to a position or group of positions which commences at the beginning of a pay period and includes one complete rotation of said shifts.

  • Salary Schedule Placement College Training A. Unit members qualifying for the “Entry Level Salary” shall remain at this level until they met the minimum requirements for placement on any other salary column (1-4). Upon verification of documentation qualifying unit members for placement upon any other salary column (1-4), the unit member shall then be placed upon the appropriate step on that salary column in accordance with his/her length of service. B. School Nurses who have a Bachelor’s degree, qualify for crediting of previous experience, but have not completed 30 semester units after the Bachelor’s degree or the appropriate clear credential, shall be exempt from placement at “Entry Level Salary”; shall instead, be placed on Column 1; and shall advance on the salary schedule in accordance with the Agreement for unit members. C. Unit members placed on “COLUMN 1” of the Salary Schedules by the agreement (Appendix C1) between the Association and the District shall advance on the schedule in accordance with that agreement (Appendix C1). D. All college or university credits which will qualify a unit member for a new salary placement must be verified by official college or university transcripts in order to justify a contract revision. Such college or university credits must be obtained from an institution of higher learning which is accredited by the Western Association of Schools and Colleges or other recognized accreditation organization. Salary revision shall be effective following District approval (as stipulated by this Article) of the necessary credits for column advancement. E. The unit requirement for each salary column is stated in semester hours of credit; quarter hour credits can be converted into semester hours by multiplying 2/3. F. For salary schedule purposes, only semester units earned after the completion of the Bachelor’s Degree shall be considered. G. Credit will not be granted for any course for which less than a "C" grade is earned. H. Unit members shall not enroll in courses which conflict with the work day. I. A major teaching field is considered to be 36 semester hours (12 of which must be upper division or graduate), a minor teaching field is considered to be 20 semester hours (8 of which must be upper division or graduate). J. Repeat credit may be granted for a course taken at an accredited institution in which the content field has recently undergone substantial change or, in the case of a course originally taken many years ago, an updating of study is desirable. K. Course work, for salary credit must be upper division, graduate level, or transferable* lower division courses, taken at an accredited college or university, and must conform to one or more of the following guidelines: 1. Units may be taken in a subject directly related to the teaching/work assignment. 2. Units may be taken in a subject directly related to a person’s major or minor. For unit members in a self-contained classroom program; a subject commonly taught in the elementary school. For unit members in a departmentalized classroom program; courses in an additional major or minor. 3. Units may be taken in a subject directly related to an advanced degree in professional education or in a subject related to the teaching/work assignment. 4. Units may be taken in a subject directly related to a credential or certificate authorized by the California Commission on Teacher Credentialing. 5. Units may be taken in a Board authorized, District sponsored, professional activity. Credit equivalent will be adopted at the time of such Board action. *A transferable lower division course is a lower division course taken at an accredited college or university that is acceptable for baccalaureate graduation credit at another accredited college or university. L. The submission of transcripts for columnar advancement of the salary schedule is limited to two (2) submission dates per school year. Additional units may be banked for future salary schedule advancement. M. Transcripts for completed units must be submitted to the Human Resources Division no later than the first of September or February for salary adjustment. Adjustment for qualifying units submitted no later than the first of September will be retroactively made effective on the first work day of the school year. Adjustment for qualifying units submitted no later than the first of February will be retroactively made effective on the first work day of the calendar year.

  • Completion Schedule 6.1 The proposed schedule for the completion of the Project is presented in “Attachment D” and is made a part hereof. 6.2 ENGINEER shall adhere to all time limits stated in this Agreement or included in any accepted time schedule. All such time limits shall be of the essence to this Agreement. 6.3 In all events the various stages and phases of ENGINEER’S services are to be completed in such sequence and at such times, and with approved or agreed upon time limits, as may be required to assure the timely, continuous, efficient and diligent prosecution of the work and services provided for by this Agreement. 6.4 OWNER may at any time, by written order, make changes within the general scope of the Agreement in the services of work to be performed. If ENGINEER believes that such a change justifies an increase in ENGINEER’S contract time or contract price required to perform the series under this Agreement it must assert such claim in writing within thirty (30) days of receipt of OWNER’S written order giving rise to the claim. No claim for adjustment in the contract time or contract price will be valid if not submitted in accordance with this paragraph. No services for which ENGINEER will charge additional compensation shall be furnished without the written authorization of OWNER. 6.5 ENGINEER shall carry on all work required under this Agreement and maintain the schedule for services during all disputes or disagreements with OWNER. No work shall be delayed or postponed pending resolution of any disputes or disagreements except as permitted in Article 8, or as ENGINEER and OWNER may otherwise agree in writing. 6.6 If the commencement, prosecution or completion of the services under this Agreement, or of the construction of the Project is delayed by any act, omission, delay, neglect or default of ENGINEER, or anyone employed by ENGINEER, or by any damage or acts caused by the negligent acts or omission by ENGINEER, then ENGINEER shall be liable to OWNER for any and all costs, assessments, expense, liabilities or damages caused thereby, in accordance with Section 4.8. 6.7 ENGINEER shall not be responsible for any time delays in the Project, or in the performance of services under this Agreement, to the extent such delays are caused solely by any act, omission, neglect or default of OWNER or anyone employed by OWNER, or by the unreasonable delay of any review agency or utility, or for any delay or damage caused by fire or the combined action of workers and which are in no way chargeable, in whole or in part, to ENGINEER, or by any other conditions or circumstances beyond the control of ENGINEER, its employee, agent, or other persons for whose acts or omissions ENGINEER is responsible. In the event of such delay, ENGINEER shall be entitled to an adjustment in the schedules or agreed time limitations for the performance of services, and this Agreement shall be modified in writing accordingly. Any claim of ENGINEER for adjustment under this cause must be asserted in writing within thirty (30) days from the date of the occurrence of the event giving rise to the claim, unless OWNER grants a further period of time before the date of final payment to ENGINEER. The adjustment of time for the performance of services, as provided in this paragraph, shall be ENGINEER’s sole exclusive right, entitlement and remedy in the event of such delays, and ENGINEER shall have no claim against OWNER for adjustment for increase in costs of performance, or other damages occurred in connection therewith.

  • Payment Scheduling The earliest possible Scheduled Payment Date for each Xxxxxx will be designated within the portion of the Site through which the Service is offered when you are scheduling the payment. Therefore, the Service will not permit you to select a Scheduled Payment Date less than the earliest possible Scheduled Payment Date designated for each Xxxxxx. When scheduling payments you must select a Scheduled Payment Date that is no later than the actual Due Date reflected on your Xxxxxx statement unless the Due Date falls on a non-Business Day. If the actual Due Date falls on a non-Business Day, you must select a Scheduled Payment Date that is at least one (1) Business Day before the actual Due Date. Scheduled Payment Dates must be prior to any late date or grace period. Depending on the method of payment, your Eligible Transaction Account may be debited prior to the Scheduled Payment Date. For example, if the selected method of payment is a draft, the draft arrives earlier than the Scheduled Payment Date due to expedited delivery by the postal service, and the Xxxxxx immediately deposits the draft, your Eligible Transaction Account may be debited earlier than the Scheduled Payment Date.

  • Auction Schedule The Auction Agent shall conduct Auctions in accordance with the schedule set forth below. Such schedule may be changed by the Auction Agent with the consent of the Company, which consent shall not be withheld unreasonably. The Auction Agent shall give notice of any such change to each Broker-Dealer. Such notice shall be received prior to the first Auction Date on which any such change shall be effective. Time Event ---- ----- By 9:30 A.M. Auction Agent advises the Company and the Broker-Dealers of the Reference Rate and the Maximum Applicable Rate as set forth in Section 2.2(e)(i) hereof.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!