Predictive Maintenance Sample Clauses

Predictive Maintenance. A predictive maintenance program will center on Manager’s ability to track vital trend information. Observing critical variables over time will yield valuable information regarding equipment deterioration. The preventive maintenance frequency may be increased or decreased, depending on the condition of the equipment found during a predictive maintenance inspection. Use of the preventive and predictive maintenance schedules, in conjunction with the monitoring of operational data that reflect equipment condition, will result in high reliability and reduced maintenance costs.
Sample 1Sample 2
AutoNDA by SimpleDocs
Predictive Maintenance. The Contractor shall perform lubricating oil analysis on all lubricating and hydraulic oil systems. The Contractor shall respond to and perform as necessary preventative and corrective maintenance as indicated by the analysis.
Sample 1
Predictive Maintenance. A predictive maintenance program is implemented which can include one or all of the following: • Vibration Analysis – Regular checking of equipment vibration signatures to detect imbalances or bearing faults. • Lube Oil Analysis – Testing of lubrication oils and greases to detect water, acids or other dissolved contaminants. These analyses also evaluate wear particles to determine type and severity of machinery wear. • Dielectric Oil Analysis – Testing of transformer oils for dielectric strength and for dissolved gases and water. • Infrared Thermography (IRT) – Infrared imaging of operating electrical or mechanical equipment to detect hot spots.
Sample 1
Predictive Maintenance. Comparing the trend of measured physical parameters against known engineering limits for the purpose of detecting, analyzing, and correcting problems before failure occurs.
Sample 1
Predictive Maintenance. “Predictive maintenance” is a program of maintenance activities in which scheduling of maintenance derives from monitoring the operating condition, or changes in the operating condition, of equipment being maintained.
Sample 1

Related to Predictive Maintenance

  • Software Maintenance Subrecipient shall apply security patches and upgrades in a timely manner and keep virus software up-to-date on all systems on which State data may be stored or accessed.

  • Use; Maintenance Borrower shall keep and maintain all items of equipment and other similar types of personal property that form any significant portion or portions of the Collateral in good operating condition and repair and shall make all necessary replacements thereof and renewals thereto so that the value and operating efficiency thereof shall at all times be maintained and preserved. Borrower shall not permit any such material item of Collateral to become a fixture to real estate or an accession to other personal property, without the prior written consent of Lender. Borrower shall not permit any such material item of Collateral to be operated or maintained in violation of any applicable law, statute, rule or regulation. With respect to items of leased equipment (to the extent Lender has any security interest in any residual Borrower’s interest in such equipment under the lease), Borrower shall keep, maintain, repair, replace and operate such leased equipment in accordance with the terms of the applicable lease.

  • Patent Maintenance All annuity and maintenance fees that are necessary in order to keep the Patents in force as of the Effective Date have been paid by Seller, and no payment of annuities or fees, or papers to be filed in patent offices, are required to be made within the three-month period after the Effective Date.

  • System Maintenance The Trust understands that USBFS will perform periodic maintenance to the System(s), which may cause temporary service interruptions. To the extent possible, USBFS shall notify the Trust of all planned outages and will perform any necessary maintenance during non-business hours.

  • Tenant’s Maintenance Subject to the provisions of Article Fourteen, Tenant, at its expense, shall keep and maintain the Premises and all Tenant Additions in good order, condition and repair and in accordance with all Laws and Environmental Laws. Tenant shall not permit waste and shall promptly and adequately repair all damages to the Premises and replace or repair all damaged or broken glass in the interior of the Premises, fixtures or appurtenances. Any repairs or maintenance shall be completed with materials of similar quality to the original materials, all such work to be completed under the supervision of Landlord. Any such repairs or maintenance shall be performed only by contractors or mechanics approved by Landlord, which approval shall not be unreasonably withheld, and whose work will not cause or threaten to cause disharmony or interference with Landlord or other tenants in the Building and their respective agents and contractors performing work in or about the Building. If Tenant fails to perform any of its obligations set forth in this Section 8.02, Landlord may, in its sole discretion and upon 24 hours prior notice to Tenant (except without notice in the case of emergencies), perform the same, and Tenant shall pay to Landlord any costs or expenses incurred by Landlord upon demand.

  • Maintenance and Operation Member-Generator agrees to maintain their system and facilities in accordance with applicable manufacturer's recommended maintenance schedule and standard prudent engineering practices. Member-Generator covenants and agrees to operate their system, facilities and equipment so as to minimize the likelihood for a malfunction or other disturbance, damaging or otherwise affecting or impairing Cooperative’s electrical system. Member-Generator shall comply with all applicable laws, regulations, zoning, building codes, safety rules and other environmental regulations or restrictions applicable to the design, installation, operation and maintenance of the Member-Generator's System. Member-Generator must, at least once every year, conduct a test to confirm that Member-Generator’s System automatically ceases to energize the output (interconnection equipment output voltage goes to zero) within two (2) seconds of being disconnected from Cooperative’s electrical system. Disconnecting the Member-Generator’s System from Cooperative’s electrical system at the visible disconnect switch and measuring the time required for the unit to cease to energize the output shall satisfy this test. Member-Generator shall maintain a record of the results of these tests and, upon request by Cooperative, shall provide a copy of the test results to Cooperative. If Member-Generator is unable to provide a copy of the test results upon request, Cooperative shall notify Member- Generator by mail that Member-Generator has thirty (30) days from the date Member-Generator receives the request to provide Cooperative with the results of a test. If Member-Generator does not provide Cooperative with the test results within the thirty (30) day time period or if the test results provided to Cooperative show that Member-Generator’s net metering unit is not functioning correctly, Cooperative may immediately disconnect Member-Generator’s System from Cooperative’s electrical system. If Member-Generator’s equipment ever fails this test, Member-Generator shall immediately disconnect Member-Generator’s System from Cooperative's electrical system. Member-Generator’s System shall not be reconnected to Cooperative's electrical system by the Member-Generator until Member-Generator’s System is repaired and operating in a normal and safe manner. Cooperative shall have the right to have a representative present and informed when any such tests are conducted. Cooperative does not warrant the testing procedures or results by the presence of its representative. Member-Generator is responsible for protecting their equipment from transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits, and from any other causes or events. Therefore, Cooperative shall not be responsible for damage to Member-Generator’s equipment allegedly caused by transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits or other causes or events. Member-Generator agrees to notify Cooperative no less than thirty (30) days prior to modification of the components or design of the Member-Generator’s System that in any way may degrade or significantly alter the System’s output characteristics. Member-Generator acknowledges that any such modifications will require submission of a new Application and Agreement to Cooperative.

  • Common Area Maintenance Subject to Articles Eleven and Twelve, Landlord shall maintain the Common Areas in good order, condition, and repair. Common Area Maintenance expenses (“CAM Expenses”) are all costs and expenses associated with the operation and maintenance of the Common Areas and the repair and maintenance of the heating, ventilation, air conditioning, plumbing, electrical, utility and safety systems (to the extent not performed by Tenant), including, but not limited to, the following: gardening and landscaping; snow removal; utility, water, sewage and property drainage services for the Common Area; maintenance of signs (other than tenants’ signs); worker’s compensation insurance; personal property taxes; rentals or lease payments paid by Landlord for rented or leased personal property used in the operation or maintenance of the Common Areas; fees for required licenses and permits routine maintenance and repair of roof membrane, flashings, gutters, downspouts, roof drains, skylights and waterproofing; maintenance of paving, (including sweeping, striping, repairing, resurfacing and repaving); general maintenance; painting; lighting; cleaning; refuse removal; security and similar items; reserves for roof replacement, exterior painting and other appropriate reserves; and a property management fee not to exceed five percent (5%) of building revenues. Landlord may cause any or all of such services to be provided by third parties and the cost of such services shall be included in CAM Expenses. With respect to any CAM Expenses which are included for the benefit of the Property and other property. Landlord shall make a reasonable allocation of such cost between the Property and such other property. CAM Expenses shall not include the cost of capital repairs and replacements; provided, however, that (a) the annual depreciation (based on the useful life of the item under generally accepted accounting principles) of any such capital repair or replacement to the Common Areas or the heating, ventilating, air-conditioning, plumbing, electrical, utility and safety systems serving the Property, shall be included in the CAM Expenses each year during the Lease Term; and (b) the cost of capital improvements undertaken to reduce CAM Expenses or made in order to comply with legal requirements shall be included in CAM Expenses each year during the term of this Lease.

  • Information Systems Acquisition Development and Maintenance Security of System Files. To protect City Information Processing Systems and system files containing information, Service Provider will ensure that access to source code is restricted to authorized users whose specific job function necessitates such access.

  • License Maintenance Fees COMPANY shall pay to M.I.T. the following license maintenance fees on the dates set forth below: [January 1, year] [dollar amount] [January 1, year] [dollar amount] [and each January 1 of every year thereafter] [dollar amount] This annual license maintenance fee is nonrefundable; however, the license maintenance fee may be credited to running royalties subsequently due on NET SALES earned during the same calendar year, if any. License maintenance fees paid in excess of running royalties due in such calendar year shall not be creditable to amounts due for future years.

Time is Money Join Law Insider Premium to draft better contracts faster.