Required Procurement Procedures for Obtaining Goods and Services The Grantee shall provide maximum open competition when procuring goods and services related to the grant- assisted project in accordance with Section 287.057, Florida Statutes.
Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.
CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “
(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “
(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.
Purpose; Incorporation by Reference of Auction Procedures and Settlement Procedures (a) On each Auction Date, the provisions of the Auction Procedures will be followed by the Auction Agent for the purpose of determining the Applicable Rate for the of APS, for the next Dividend Period therefor. Each periodic operation of such procedures is hereinafter referred to as an "Auction."
(b) All of the provisions contained in the Auction Procedures and the Settlement Procedures are incorporated herein by reference in their entirety and shall be deemed to be a part of this Agreement to the same extent as if such provisions were set forth fully herein.
(c) BD agrees to act as, and assumes the obligations of and limitations and restrictions placed upon, a Broker-Dealer under this Agreement. BD understands that other Persons meeting the requirements specified in the definition of "Broker-Dealer" contained in Paragraph 10 of Article VII of the Amended By-laws may execute a Broker-Dealer Agreement and participate as Broker-Dealers in Auctions.
(d) BD and other Broker-Dealers may participate in Auctions for their own accounts. However, the Trust, by notice to BD and all other Broker Dealers, may prohibit all Broker-Dealers from submitting Bids in Auctions for their own accounts, provided that Broker-Dealers may continue to submit Hold Orders and Sell Orders.
PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:
Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.
Change of Control; Assignment and Subcontracting Except as set forth in this Section 7.5, neither party may assign any of its rights and obligations under this Agreement without the prior written approval of the other party, which approval will not be unreasonably withheld. For purposes of this Section 7.5, a direct or indirect change of control of Registry Operator or any subcontracting arrangement that relates to any Critical Function (as identified in Section 6 of Specification 10) for the TLD (a “Material Subcontracting Arrangement”) shall be deemed an assignment.
(a) Registry Operator must provide no less than thirty (30) calendar days advance notice to ICANN of any assignment or Material Subcontracting Arrangement, and any agreement to assign or subcontract any portion of the operations of the TLD (whether or not a Material Subcontracting Arrangement) must mandate compliance with all covenants, obligations and agreements by Registry Operator hereunder, and Registry Operator shall continue to be bound by such covenants, obligations and agreements. Registry Operator must also provide no less than thirty (30) calendar days advance notice to ICANN prior to the consummation of any transaction anticipated to result in a direct or indirect change of control of Registry Operator.
(b) Within thirty (30) calendar days of either such notification pursuant to Section 7.5(a), ICANN may request additional information from Registry Operator establishing (i) compliance with this Agreement and (ii) that the party acquiring such control or entering into such assignment or Material Subcontracting Arrangement (in any case, the “Contracting Party”) and the ultimate parent entity of the Contracting Party meets the ICANN-‐adopted specification or policy on registry operator criteria then in effect (including with respect to financial resources and operational and technical capabilities), in which case Registry Operator must supply the requested information within fifteen (15) calendar days.
(c) Registry Operator agrees that ICANN’s consent to any assignment, change of control or Material Subcontracting Arrangement will also be subject to background checks on any proposed Contracting Party (and such Contracting Party’s Affiliates).
(d) If ICANN fails to expressly provide or withhold its consent to any assignment, direct or indirect change of control of Registry Operator or any Material Subcontracting Arrangement within thirty (30) calendar days of ICANN’s receipt of notice of such transaction (or, if ICANN has requested additional information from Registry Operator as set forth above, thirty (30) calendar days of the receipt of all requested written information regarding such transaction) from Registry Operator, ICANN shall be deemed to have consented to such transaction.
(e) In connection with any such assignment, change of control or Material Subcontracting Arrangement, Registry Operator shall comply with the Registry Transition Process.
(f) Notwithstanding the foregoing, (i) any consummated change of control shall not be voidable by ICANN; provided, however, that, if ICANN reasonably determines to withhold its consent to such transaction, ICANN may terminate this Agreement pursuant to Section 4.3(g), (ii) ICANN may assign this Agreement without the consent of Registry Operator upon approval of the ICANN Board of Directors in conjunction with a reorganization, reconstitution or re-‐incorporation of ICANN upon such assignee’s express assumption of the terms and conditions of this Agreement, (iii) Registry Operator may assign this Agreement without the consent of ICANN directly to a wholly-‐owned subsidiary of Registry Operator, or, if Registry Operator is a wholly-‐owned subsidiary, to its direct parent or to another wholly-‐owned subsidiary of its direct parent, upon such subsidiary’s or parent’s, as applicable, express assumption of the terms and conditions of this Agreement, and (iv) ICANN shall be deemed to have consented to any assignment, Material Subcontracting Arrangement or change of control transaction in which the Contracting Party is an existing operator of a generic top-‐level domain pursuant to a registry agreement between such Contracting Party and ICANN (provided that such Contracting Party is then in compliance with the terms and conditions of such registry agreement in all material respects), unless ICANN provides to Registry Operator a written objection to such transaction within ten (10) calendar days of ICANN’s receipt of notice of such transaction pursuant to this Section 7.5. Notwithstanding Section 7.5(a), in the event an assignment is made pursuant to clauses (ii) or (iii) of this Section 7.5(f), the assigning party will provide the other party with prompt notice following any such assignment.
POST ONLINE PUBLIC AUCTION PROCEDURES 4.1. Successful E-bidders shall and undertake to sign the Memorandum of Sale at the office of the Auctioneer within 3 working days from the date of auction, failing which the deposit paid will be forfeited to the Assignee bank and the sale will be deemed cancelled/terminated and the property may be put up again for subsequent auction without further notice to the said E-Bidders. The Auctioneer shall send the Memorandum of Sale for stamping and thereafter forward the same together with the required deposit paid under Clause 2.4 above and the differential sum paid under this clause (if any) to the Assignee bank.
4.2. Any successful E-bidder who is unable to attend to sign the Memorandum of Sale at the Auctioneer's office may do so by authorising another person to sign the same of his/her behalf by inserting the particulars of the authorised person and furnishing a copy of his/her identity card and also a Letter of Authorisation for this purpose.
4.3. In the event that there is inconsistency between the personal details and the documents uploaded in the PAH Website and the actual documents produced by the successful bidder, the Auctioneer shall have the right to refuse the successful bidder from signing the Memorandum of Sale and may at its discretion cancel the sale and proceed to put up property up for a new auction and the deposit paid shall be forfeited.
4.4. The Memorandum of Sale upon being signed by the Auctioneer, Solicitor for the Assignee bank and the successful Bidder/Authorised agent shall be conclusive evidence of the sale of the property to the successful bidder.
CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “
(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “
(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.
Proposed Policies and Procedures Regarding New Online Content and Functionality By October 31, 2017, the School will submit to OCR for its review and approval proposed policies and procedures (“the Plan for New Content”) to ensure that all new, newly-added, or modified online content and functionality will be accessible to people with disabilities as measured by conformance to the Benchmarks for Measuring Accessibility set forth above, except where doing so would impose a fundamental alteration or undue burden.
a) When fundamental alteration or undue burden defenses apply, the Plan for New Content will require the School to provide equally effective alternative access. The Plan for New Content will require the School, in providing equally effective alternate access, to take any actions that do not result in a fundamental alteration or undue financial and administrative burdens, but nevertheless ensure that, to the maximum extent possible, individuals with disabilities receive the same benefits or services as their nondisabled peers. To provide equally effective alternate access, alternates are not required to produce the identical result or level of achievement for persons with and without disabilities, but must afford persons with disabilities equal opportunity to obtain the same result, to gain the same benefit, or to reach the same level of achievement, in the most integrated setting appropriate to the person’s needs.
b) The Plan for New Content must include sufficient quality assurance procedures, backed by adequate personnel and financial resources, for full implementation. This provision also applies to the School’s online content and functionality developed by, maintained by, or offered through a third-party vendor or by using open sources.
c) Within thirty (30) days of receiving OCR’s approval of the Plan for New Content, the School will officially adopt, and fully implement the amended policies and procedures.