Common use of Product Availability Clause in Contracts

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the condition of the item and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. Krown lab, Inc. shall not be responsible for in transit damages, shortage or loss, unless solely caused by Krown lab, Inc., both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant specification before installation, and Buyer shall immediately notify Krown Lab, Inc. of any items found to be incorrect or defective so that Krown lab, Inc. may replace same before installation. Krown lab, Inc. shall be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown lab, Inc.’s Manufacturing Partners, Krown lab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. A purchase order and payment as outlined above are required to start the drawing process. A drawing will be provided to for Buyer review. Buyer is responsible for providing Krown Lab, Inc. with all relevant and accurate site conditions and field dimensions. The first revision to apply evolved field dimensions, or any other changes will be provided at no charge. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production of Krown lab, Inc.’s Products, and for mounting point reference locations for said Products. All other aspects of the drawings provided, including but not limited to, dimensions, layouts, and specifications of all kinds, for head and sill details, doors and wall panels, framing or other structural members, trim or case work, are solely included to provide context for Krown Lab, Inc.’s Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require that drawings provided Buyer are to be reviewed and signed as approved. Approved drawings are required before Krown Lab, Inc. begins order fulfillment, related fabrication, and assembly. The scheduled delivery date as noted on Buyer’s quotation will begin from the day Krown Lab, Inc. has received both the purchase order and final approved drawing.

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours our warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the condition of the item and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. Krown lab, Inc. shall not be responsible for in transit damages, shortage or loss, unless solely caused by Krown lab, Inc., both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant specification before installation, and Buyer shall immediately notify Krown Lab, Inc. within 2 business days of any items found to be missing, incorrect or defective so that Krown lab, Inc. may replace same before installation. Krown lab, Inc. shall be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown lab, Inc.’s Manufacturing Partners, Krown lab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. If will call pick-up from our warehouse is chosen for receiving an order, Krown lab, Inc. shall notify Buyer when order is ready for pick-up, and hold the order in will call for a subsequent 4-week period. If Buyer does not pick-up within the 4-week period, Krown lab, Inc. may charge a storage fee of 5% of the order total per month, beginning the first day after the 4-week period. A purchase order and payment as outlined above are required to start the drawing process. A drawing will be provided to for Buyer review. Buyer is responsible for providing Krown Lab, Inc. with all relevant and accurate site conditions and field dimensions. The first revision to apply evolved field dimensions, or any other changes will be provided at no charge. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production of Krown lab, Inc.’s Products, and for mounting point reference locations for said Products. All other aspects of the drawings provided, including but not limited to, dimensions, layouts, and specifications of all kinds, for head and sill details, doors and wall panels, framing or other structural members, trim or case work, are solely included to provide context for Krown Lab, Inc.’s Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require that drawings provided Buyer are to be reviewed and signed as approved. Approved drawings are required before Krown Lab, Inc. begins order fulfillment, related fabrication, and assembly. The scheduled delivery date as noted on Buyer’s quotation will begin from the day Krown Lab, Inc. has received both the purchase order and final approved drawing.

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the condition of the item and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. Krown lab, Inc. shall not be responsible for in transit damages, shortage or loss, unless solely caused by Krown lab, Inc., both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant specification before installation, and Buyer shall immediately notify Krown Lab, Inc. of any items found to be incorrect or defective so that Krown lab, Inc. may replace same before installation. Krown lab, Inc. shall be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown lab, Inc.’s Manufacturing Partners, Krown lab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. A purchase This price quotation and/or sales order is made on the assumption that the Buyer has taken all necessary steps to ensure that the work which this quotation and payment as outlined above are required specifications refer to start is acceptable to the drawing processLocal and State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to safety and protection of the public, access, escape in case of fire, ventilation, lighting, and other usability or functionality requirements. A drawing will be provided Xxxxx agrees to for Buyer reviewcomply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the build-out is taking place. Buyer Krown lab, Inc. is not responsible for providing Krown Labany violations of building, Inc. with all relevant zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and accurate site conditions and field dimensions. The first revision to apply evolved field dimensions, or any other changes will be provided at no chargeused. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production of Krown lab, Inc.’s ProductsProducts are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown lab, Inc. is not responsible for mounting point reference locations decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for said installation or application of its Products. All other aspects Krown lab, Inc. is further not responsible for the proper installation or performance of the drawings provideddoor panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown lab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown lab, Inc. is not responsible for site conditions, including but not limited to, dimensions, layouts, and specifications uneven floors or levels; walls being out of all kinds, for head and sill details, doors and wall panels, framing square or plumb; improperly supported headers or other structural memberselement or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, trim design, or case workshape of existing or new drywall (or any other material); or by any other site-specific condition involving the application of its Products. Xxxxx agrees to defend, are solely included indemnify and hold harmless Krown Lab, Inc. against all costs, damages, penalties, expenses, and fees in any way associated with the installation, maintenance, or use of its Products unless specifically related to provide context defects in material or workmanship. All tempered glass is subject to experience spontaneous breakage. Any and all specifications provided by Krown Lab, Inc. for glass is only in respect to attachment to our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require is not responsible to ensure that drawings the fabrication of glass is done in accordance with specifications provided Buyer are to be reviewed and signed as approved. Approved drawings are required before by Krown Lab, Inc. begins order fulfillment, related fabrication, and assemblyor any other party. The scheduled delivery date as noted on Buyer’s quotation will begin from the day This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. has received ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). This Warranty is non- transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Original Purchaser includes both the purchase order and final approved drawingactual purchasing company as well as the owner(s) of the dwelling where the Product(s) are initially installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer Warranties supplied by our Manufacturing Partners.

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours our warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the for condition of the item issues and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. Krown lab, Inc. shall not be responsible for in transit damages, shortage or loss, unless solely caused by Krown lab, Inc., both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant specification before installation, and Buyer shall immediately notify Krown Lab, Inc. within 2 business days of any items found to be missing, incorrect or defective so that Krown lab, Inc. may replace same before installation. Krown lab, Inc. shall be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown lab, Inc.’s Manufacturing Partners, Krown lab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. A purchase order and payment as outlined above are required to start the drawing process. A drawing If will be provided to call pick-up from our warehouse is chosen for Buyer review. Buyer is responsible for providing Krown Labreceiving an order, Inc. with all relevant and accurate site conditions and field dimensions. The first revision to apply evolved field dimensions, or any other changes will be provided at no charge. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production of Krown lab, Inc.’s ProductsInc. shall notify Buyer when order is ready for pick-up, and hold the order in will call for mounting point reference locations for said Productsa subsequent 4-week period. All other aspects If Buyer does not pick-up within the 4-week period, Krown lab, Inc. may charge a storage fee of 5% of the drawings providedorder total per month, including but not limited to, dimensions, layouts, and specifications of all kinds, for head and sill details, doors and wall panels, framing or other structural members, trim or case work, are solely included to provide context for Krown Lab, Inc.’s Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require that drawings provided Buyer are to be reviewed and signed as approved. Approved drawings are required before Krown Lab, Inc. begins order fulfillment, related fabrication, and assembly. The scheduled delivery date as noted on Buyer’s quotation will begin from beginning the first day Krown Lab, Inc. has received both after the purchase order and final approved drawing4-week period.

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours (or our Manufacturing Partner’s) warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the condition of the item and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. The item will be returned and a replacement item will be shipped to you. Krown labLab, Inc. shall is not be responsible for in transit any damages, shortage or loss, in transit, and Krown lab, Inc. (or our Manufacturing Partners) shall not be responsible unless damages, shortage or loss, in transit are caused solely caused by Krown lab, Inc.Inc. (or our Manufacturing Partners). Krown Lab, Inc. accepts no liability for in transit damages, shortage, or loss, unless both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, and the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant Krown Lab, Inc. specification before installation, and Buyer shall immediately notify Krown Lab, Inc. of any items found to be incorrect or defective so that Krown lab, Inc. (or our Manufacturing Partners) may replace same before installation. Neither Krown lab, Inc. (or our Manufacturing Partners) shall be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown lab, Inc.’s Manufacturing Partners, Krown lab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. A purchase order and payment as outlined above are required to start the drawing process. A drawing will be provided to for Buyer review. Buyer is responsible for providing Krown Lab, Inc. with all relevant and accurate site conditions and field dimensions. The first revision to apply evolved field dimensions, or any other changes will be provided at no charge. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production of Krown lab, Inc.’s Products, and for mounting point reference locations for said Products. All other aspects of the drawings provided, including but not limited to, dimensions, layouts, and specifications of all kinds, for head and sill details, doors and wall panels, framing or other structural members, trim or case work, are solely included to provide context for Krown Lab, Inc.’s Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require that drawings provided Buyer are to be reviewed and signed as approved. Approved drawings are required before Krown Lab, Inc. begins order fulfillment, related fabrication, and assembly. The scheduled delivery date as noted on Buyer’s quotation will begin from the day Krown Lab, Inc. has received both the purchase order and final approved drawing.

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours our warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the for condition of the item issues and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. Krown lab, Inc. shall not be responsible for in transit damages, shortage or loss, unless solely caused by Krown lab, Inc., both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant specification before installation, and Buyer shall immediately notify Krown Lab, Inc. within 2 business days of any items found to be missing, incorrect or defective so that Krown labLab, Inc. may replace same before installation. Krown labLab, Inc. shall not be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown labLab, Inc.’s Manufacturing Partners, Krown labLab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. A purchase order and payment as outlined above are required to start the drawing process. A drawing If will be provided to call pick-up from our warehouse is chosen for Buyer review. Buyer is responsible for providing receiving an order, Krown Lab, Inc. with all relevant shall notify Buyer when order is ready for pick-up, and accurate site conditions and field dimensionshold the order in will call for a subsequent 4-week period. The first revision to apply evolved field dimensionsIf Buyer does not pick-up within the 4-week period, or any other changes will be provided at no charge. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production may charge a storage fee of Krown lab, Inc.’s Products, and for mounting point reference locations for said Products. All other aspects 5% of the drawings providedorder total per month, including but not limited to, dimensions, layouts, and specifications of all kinds, for head and sill details, doors and wall panels, framing or other structural members, trim or case work, are solely included to provide context for Krown Lab, Inc.’s Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require that drawings provided Buyer are to be reviewed and signed as approved. Approved drawings are required before Krown Lab, Inc. begins order fulfillment, related fabrication, and assembly. The scheduled delivery date as noted on Buyer’s quotation will begin from beginning the first day Krown Lab, Inc. has received both after the purchase order and final approved drawing4-week period.

Product Availability. Krown Lab, Inc. makes every effort to ensure that your product is shipped according to the estimated lead times provided at the time of purchase. The estimated lead times are in business days (Monday through Friday, excluding federal holidays). Although Krown Lab, Inc. makes every effort to ensure shipment of your order according to the lead time provided, shipping dates may change due to changes in supply. If the lead-time changes, Krown Lab, Inc. will contact you and provide a revised shipping estimate. Buyer must be able to provide means of receiving the delivery of items, which may require a forklift. Once an item leaves ours our warehouse we are unable to prevent delays by the freight carrier. It is the Buyer’s responsibility to coordinate acceptance or pick-up of items upon attempted delivery. Any costs or expenses incurred by Krown lab, Inc. as a result of the Buyer’s failure to accept or pick-up the items will be charged to the Buyer. When receiving your items please check the for condition of the item issues and make note of any damage before signing the bill of lading. The shipper is only responsible for damages noted on the bill of lading. Any damages not noted will not be covered by the shipper. If an item is severely damaged at the time of delivery, please refuse delivery. Krown lab, Inc. shall not be responsible for in transit damages, shortage or loss, unless solely caused by Krown lab, Inc., both Krown Lab, Inc. and the carrier(s) are notified within one day of receipt of Products, the Products have been signed for as “damaged”, or “not examined”, and have been handled by the Buyer in accordance with the carrier’s conditions of use. Products supplied and delivered for installation shall be checked by the Buyer against relevant specification before installation, and Buyer shall immediately notify Krown Lab, Inc. within 2 business days of any items found to be missing, incorrect or defective so that Krown labLab, Inc. may replace same before installation. Krown labLab, Inc. shall not be responsible for charges or for any cost incurred in dismantling incorrect or defective items. For all Products delivered to Buyer directly from Krown labLab, Inc.’s Manufacturing Partners, Krown labLab, Inc.’s involvement, liability, and responsibility ends once Product(s) is in transit to Buyer. The only exception to the aforesaid is if Krown Lab, Inc. has incorrectly relayed Buyer’s specifications to the Manufacturing Partner. Buyer is therefore in all other cases to communicate directly and exclusively with relevant Manufacturing Partner once Product(s) is in transit. A purchase order and payment as outlined above are required to start If will call pick-up from our warehouse is chosen for receiving the drawing process. A drawing will be provided to for Buyer review. Buyer is responsible for providing order, Krown Lab, Inc. with all relevant shall notify Buyer for will call pick-up, holding the order for a subsequent 4-week period in the case of hardware and accurate site conditions and field dimensionsa subsequent 2-week period in the case of a door (or doors). The first revision to apply evolved field dimensionsIf Buyer does not pick-up within the prescribed period, or any other changes will be provided at no charge. All subsequent revisions will be subject to charge of $125.00 per hour, per revision, per door opening. Drawings will be returned within 24 to 72 hours depending upon the degree of revisions required. Krown Lab, Inc. drawings are solely intended to provide information required for production may charge a storage fee of Krown lab, Inc.’s Products, and for mounting point reference locations for said Products. All other aspects 3% of the drawings providedorder total per day, including but not limited tobeginning the first day after the period ends. In the case of an order being held back from shipping by Xxxxx's request, dimensions, layouts, and specifications of all kinds, for head and sill details, doors and wall panels, framing or other structural members, trim or case work, are solely included to provide context for Krown Lab, Inc.’s Products, and are not be considered comprehensive or complete, nor job specific. Krown Lab, Inc. require that drawings provided Buyer are to be reviewed and signed as approved. Approved drawings are required before Krown Labmay charge a storage fee of 3% of the order total per day, Inc. begins order fulfillment, related fabrication, and assembly. The scheduled delivery date as noted on Buyer’s quotation will begin from beginning 30 days after the day Krown Lab, Inc. has received both the purchase order and final approved drawingagreed upon ship date.