Production; Transfer of Product Sample Clauses

Production; Transfer of Product. (a) From and after the Commencement Date, TF shall use commercially reasonable efforts to produce at the TF Plant (within the capacity of the TF Plant) all pork products reasonably requested by SBF, so long as such products are standard industry products or SBF is producing such products at the Xxxxxx Plant. (b) Upon 30 days prior written notice to and consent of the other Party (which consent shall not be unreasonably withheld or delayed), TF shall have the right to transfer, and SBF shall have the right to cause TF to transfer, product ("Transferred Product") from the TF Plant to an Affiliated Plant so that such Transferred Product may be modified into a form that otherwise is not produced at the TF Plant; provided, however, that the amount of Transferred Product per Party during any 30-day period shall not be greater than 50% (by weight) of the total amount of such product produced at the TF Plant during such 30-day period (it being understood, however, that if the Transferred Product required modification prior to transfer, then, for the purposes of this proviso, the applicable weight of the Transferred Product shall refer to the applicable weight of the applicable origin product (prior to such modification) produced at the TF Plant during such 30-day period).
Sample 1
AutoNDA by SimpleDocs

Related to Production; Transfer of Product

  • Transfer of Materials To facilitate the conduct of activities under the Research Plan or an Additional Research Plan, as applicable, either Party (the “Transferor Party”) may, at its election, provide Materials to the other Party (the “Transferee Party”) solely as mutually agreed by the Parties or as set forth in the Research Plan or any Additional Research Plan. All such Materials (a) will remain the sole property of the Transferor Party, (b) will be used only in the exercise if the Transferee Party’s rights or fulfillment of the Transferee Party’s obligations under this Agreement, (c) except as provided in the Research Plan or Additional Research Plan or as otherwise agreed by the Parties, (i) will remain solely under the control of the Transferee Party, (ii) will not be used or delivered by the Transferee Party to or for the benefit of any Third Party, and (iii) will not be used in research or testing involving human subjects, and (d) will be subject to all additional restrictions and obligations that the Transferor Party has identified in a written notice to the Transferee Party as being necessary for the Transferor Party to comply with its obligations to Third Parties with respect to the applicable Material, which notice is provided at or prior to the delivery of such Materials to the Transferee Party. Without limitation to ARTICLE 7, all Materials supplied under this Section 2.1.9 are supplied “as is”, with no warranties of fitness for a particular purpose, and must be used with prudence and appropriate caution in any experimental work, as not all of their characteristics may be known. Following the completion of the activities for which the applicable Materials were supplied under this Section 2.1.9 or upon the Transferor Party’s earlier request, the Transferee Party will either destroy or return to the Transferor Party, at the Transferor Party’s sole discretion, all Materials provided by the Transferor Party that are unused; provided that Vertex will have the right to retain and continue to use any Materials provided by Company that Vertex has the right to Exploit under the license granted to Vertex pursuant to Section 4.1.1.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • License Transfer Customer may not sublicense, assign, transfer, rent or lease the software or software license except as permitted by HP. HP-branded software licenses are generally transferable subject to HP’s prior written authorization and payment to HP of any applicable fees. Upon such transfer, Customer’s rights shall terminate and Customer shall transfer all copies of the software to the transferee. Transferee must agree in writing to be bound by the applicable software license terms. Customer may transfer firmware only upon transfer of associated hardware.

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.

  • Marketing of Production Except for contracts listed and in effect on the date hereof on Schedule 7.19, and thereafter either disclosed in writing to the Administrative Agent or included in the most recently delivered Reserve Report (with respect to all of which contracts the Borrower represents that it or its Subsidiaries are receiving a price for all production sold thereunder which is computed substantially in accordance with the terms of the relevant contract and are not having deliveries curtailed substantially below the subject Property’s delivery capacity), no material agreements exist which are not cancelable on 60 days notice or less without penalty or detriment for the sale of production from the Borrower’s or its Subsidiaries’ Hydrocarbons (including, without limitation, calls on or other rights to purchase, production, whether or not the same are currently being exercised) that (a) pertain to the sale of production at a fixed price and (b) have a maturity or expiry date of longer than six (6) months from the date hereof.

  • Licensed Product The term “Licensed Product” shall mean any product (a) the manufacture, use, importation, sale or offer for sale of which would, in the absence of the license granted by this Agreement, infringe a Valid Claim of any of the Licensed Patent Rights, or (b) that is comprised of, utilizes or incorporates Licensed Biological Materials, or (c) that is discovered, developed or made using a Licensed Process.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • Transfer of License Notwithstanding the provisions of conditions 13.1 and 13.2, if Customer sells or transfers the Equipment in which the Software operates, Kodak shall offer to license the Software, and to provide services, to any bona fide end user (“Transferee”) pursuant to Kodak’s then current standard terms, conditions and fees, provided that the Transferee is not considered, in Kodak’s discretion, a competitor of Kodak or its parent, affiliates or subsidiaries. To the extent that the Software is licensed to a Transferee in accordance with this condition, Customer’s license to use the Software shall be deemed terminated. Kodak shall offer to provide de-installation services for the Customer and re-installation and certification for the Equipment and Software and services for the Transferee at Kodak’s then current applicable fees.

  • Transfer of Technology 1. The Parties agree to exchange views and information on their law and international practices on the protection and enforcement of intellectual property rights, affecting transfer of technology. This shall, in particular, include exchanges on measures to facilitate information flows, business partnerships, and voluntary licensing and subcontracting agreements. Particular attention shall be paid to the conditions necessary to create an adequate enabling environment for technology transfer in the host countries, including issues such as the domestic legal framework and the development of human capital. 2. When measures are taken with regard to technology transfer, the legitimate interests of the intellectual property right holders shall be protected.

  • Valid Transfer This Agreement or, in the case of Additional Accounts, the related Assignment constitutes a valid sale, transfer and assignment to the Trust of all right, title and interest of the Seller in the Receivables and the Collateral Security and the proceeds thereof and all of the Seller's rights, remedies, powers and privileges with respect to the Receivables under the Receivables Purchase Agreement and, upon the filing of the financing statements described in Section 2.01 with the Secretary of State of the State of Delaware and, in the case of the Receivables hereafter created and the proceeds thereof, upon the creation thereof, the Trust shall have a first priority perfected ownership interest in such property, subject to the rights of the Purchased Receivables Owners in any Collateral Security in respect of the Partial Accounts (other than the Vehicles relating to Principal Receivables arising in the Partial Accounts), except for Liens permitted under the Receivables Purchase Agreement. Except as otherwise provided in this Agreement and except for Liens permitted under the Receivables Purchase Agreement or the other Transaction Documents, neither the Seller nor any Person claiming through or under the Seller has any claim to or interest in the Collateral of the Trust. The representations and warranties set forth in this Section 2.03 shall survive the transfer and assignment of the Receivables to the Trust and the issuance of the Notes. Upon discovery by the Seller, the Servicer, the Trust, the Owner Trustee, any Agent or the Trustee of a breach of any of the foregoing representations and warranties, the party discovering such breach shall give prompt written notice to the other parties specified above, and to any Enhancement Providers. In the event of any breach of any of the representations and warranties set forth in this Section 2.03 having a material adverse effect on the interests of the Noteholders, then either the Trustee or the Holders of Notes evidencing not less than a majority of the aggregate Outstanding Dollar Principal Amount of all Notes, by notice then given in writing to the Seller (and to the Trustee, the Trust, any Enhancement Providers and the Servicer if given by the Noteholders), may direct the Seller to purchase the Noteholders' Interest within 60 days of such notice (or within such longer period as may be specified in such notice), and the Seller shall be obligated to make such purchase on a Payment Date occurring within such 60-day period on the terms and conditions set forth below; provided, however, that no such purchase shall be required to be made if, by the end of such 60-day period (or such longer period as may be specified), the representations and warranties set forth in this Section 2.03 shall be satisfied in all material respects, and any material adverse effect on the Noteholders' Interest caused thereby shall have been cured. The Seller shall deposit in the Collection Account in immediately available funds on the Business Day preceding such Payment Date, in payment for such purchase of the Noteholders' Interest, the Reassignment Amount for such Payment Date. Notwithstanding anything to the contrary in this Agreement, such amounts deposited in the Collection Account shall be applied in accordance with Section 706 of the Indenture and shall be allocated pro rata among the then-outstanding Series based on their respective Series Nominal Liquidation Amounts. If the Trustee or the Noteholders give notice directing the Seller to purchase the Noteholders' Interest as provided above, the obligation of the Seller to purchase the Noteholders' Interest pursuant to this Section 2.03 shall constitute the sole remedy respecting an event of the type specified in the first sentence of this Section 2.03 available to the Noteholders (or the Trustee on behalf of the Noteholders).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!