Subchapter M The Fund intends to direct the investment of the proceeds of the offering described in the Registration Statement in such a manner as to comply with the requirements of Subchapter M of the Internal Revenue Code of 1986, as amended ("Subchapter M of the Code" and the "Code," respectively), and intends to qualify as a regulated investment company under Subchapter M of the Code.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Title VI List of Pertinent Nondiscrimination Acts and Authorities During the performance of this contract, the Consultant, for itself, its assignees, and successors in interest (hereinafter referred to as the “Consultant”) agrees to comply with the following non-discrimination statutes and authorities; including but not limited to: • Title VI of the Civil Rights Act of 1964 (42 U.S.C. § 2000d et seq., 78 stat. 252), (prohibits discrimination on the basis of race, color, national origin); • 49 CFR part 21 (Non-discrimination In Federally-Assisted Programs of The Department of Transportation—Effectuation of Title VI of The Civil Rights Act of 1964); • The Uniform Relocation Assistance and Real Property Acquisition Policies Act of 1970, (42 U.S.C. § 4601), (prohibits unfair treatment of persons displaced or whose property has been acquired because of Federal or Federal-aid programs and projects); • Section 504 of the Rehabilitation Act of 1973, (29 U.S.C. § 794 et seq.), as amended, (prohibits discrimination on the basis of disability); and 49 CFR part 27; • The Age Discrimination Act of 1975, as amended, (42 U.S.C. § 6101 et seq.), (prohibits discrimination on the basis of age); • Airport and Airway Improvement Act of 1982, (49 USC § 471, Section 47123), as amended, (prohibits discrimination based on race, creed, color, national origin, or sex); • The Civil Rights Restoration Act of 1987, (PL 100-209), (Broadened the scope, coverage and applicability of Title VI of the Civil Rights Act of 1964, The Age Discrimination Act of 1975 and Section 504 of the Rehabilitation Act of 1973, by expanding the definition of the terms “programs or activities” to include all of the programs or activities of the Federal-aid recipients, sub-recipients and contractors, whether such programs or activities are Federally funded or not); • Titles II and III of the Americans with Disabilities Act of 1990, which prohibit discrimination on the basis of disability in the operation of public entities, public and private transportation systems, places of public accommodation, and certain testing entities (42 U.S.C. §§ 12131 – 12189) as implemented by Department of Transportation regulations at 49 CFR parts 37 and 38; • The Federal Aviation Administration’s Non-discrimination statute (49 U.S.C. § 47123) (prohibits discrimination on the basis of race, color, national origin, and sex); • Executive Order 12898, Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations, which ensures non-discrimination against minority populations by discouraging programs, policies, and activities with disproportionately high and adverse human health or environmental effects on minority and low-income populations; • Executive Order 13166, Improving Access to Services for Persons with Limited English Proficiency, and resulting agency guidance, national origin discrimination includes discrimination because of limited English proficiency (LEP). To ensure compliance with Title VI, you must take reasonable steps to ensure that LEP persons have meaningful access to your programs (70 Fed. Reg. at 74087 to 74100); • Title IX of the Education Amendments of 1972, as amended, which prohibits you from discriminating because of sex in education programs or activities (20 U.S.C. 1681 et seq).
Compliance with Certain Requirements of Regulations; Deficit Capital Accounts In the event the Company is “liquidated” within the meaning of Regulations Section 1.704-1(b)(2)(ii)(g), distributions shall be made pursuant to this Article X to the Unit Holders who have positive Capital Accounts in compliance with Regulations Section 1.704-1(b)(2)(ii)(b)(2). If any Unit Holder has a deficit balance in such Member’s Capital Account (after giving effect to all contributions, distributions and allocations for all Fiscal Years, including the Fiscal Year during which such liquidation occurs), such Unit Holder shall have no obligation to make any contribution to the capital of the Company with respect to such deficit, and such deficit shall not be considered a debt owed to the Company or to any other Person for any purpose whatsoever. In the discretion of the Liquidator, a pro rata portion of the distributions that would otherwise be made to the Unit Holders pursuant to this Article X may be: (i) distributed to a trust established for the benefit of the Unit Holders for the purposes of liquidating Company assets, collecting amounts owed to the Company, and paying any contingent or unforeseen liabilities or obligations of the Company, in which case the assets of any such trust shall be distributed to the Unit Holders from time to time, in the reasonable discretion of the Liquidator, in the same proportions as the amount distributed to such trust by the Company would otherwise have been distributed to the Unit Holders pursuant to Section 10.2 of this Agreement; or (b) withheld to provide a reasonable reserve for Company liabilities (contingent or otherwise) and to reflect the unrealized portion of any installment obligations owed to the Company, provided that such withheld amounts shall be distributed to the Unit Holders as soon as practicable.
Application of Internal Revenue Code Section 409A Notwithstanding anything to the contrary set forth herein, any payments and benefits provided under this Agreement (the “Severance Benefits”) that constitute “deferred compensation” within the meaning of Section 409A of the Code and the regulations and other guidance thereunder and any state law of similar effect (collectively “Section 409A”) shall not commence in connection with Executive’s termination of employment unless and until Executive has also incurred a “separation from service” (as such term is defined in Treasury Regulation Section 1.409A-1(h) (“Separation From Service”), unless Employer reasonably determines that such amounts may be provided to Executive without causing Executive to incur the additional 20% tax under Section 409A. It is intended that each installment of the Severance Benefits payments provided for in this Agreement is a separate “payment” for purposes of Treasury Regulation Section 1.409A-2(b)(2)(i). For the avoidance of doubt, it is intended that payments of the Severance Benefits set forth in this Agreement satisfy, to the greatest extent possible, the exemptions from the application of Section 409A provided under Treasury Regulation Sections 1.409A-1(b)(4), 1.409A-1(b)(5) and 1.409A-1(b)(9). However, if Employer (or, if applicable, the successor entity thereto) determines that the Severance Benefits constitute “deferred compensation” under Section 409A and Executive is, on the termination of service, a “specified employee” of Employer or any successor entity thereto, as such term is defined in Section 409A(a)(2)(B)(i) of the Code, then, solely to the extent necessary to avoid the incurrence of the adverse personal tax consequences under Section 409A, the timing of the Severance Benefit payments shall be delayed until the earlier to occur of: (i) the date that is six months and one day after Executive’s Separation From Service, or (ii) the date of Executive’s death (such applicable date, the “Specified Employee Initial Payment Date”), the Employer (or the successor entity thereto, as applicable) shall (A) pay to Executive a lump sum amount equal to the sum of the Severance Benefit payments that Executive would otherwise have received through the Specified Employee Initial Payment Date if the commencement of the payment of the Severance Benefits had not been so delayed pursuant to this Section and (B) commence paying the balance of the Severance Benefits in accordance with the applicable payment schedules set forth in this Agreement. This Agreement is intended to comply with Section 409A, and it is intended that no amounts payable hereunder shall be subject to tax under Section 409A. Employer shall use commercially reasonable efforts to comply with Section 409A with respect to payments of benefits hereunder.
Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.
Application of Code Section 409A 8.1 Notwithstanding anything in this Agreement to the contrary, the receipt of any benefits under this Agreement as a result of a termination of employment will be subject to satisfaction of the condition precedent that you undergo a “separation from service” within the meaning of Treas. Reg. § 1.409A-1(h) or any successor thereto. In addition, if you are deemed to be a “specified employee” within the meaning of that term under Code Section 409A(a)(2)(B), then with regard to any payment or the provisions of any benefit that is required to be delayed pursuant to Code Section 409A(a)(2)(B), such payment or benefit will not be made or provided prior to the earlier of (i) the expiration of the six (6) month period measured from the date of your “separation from service” (as such term is defined in Treas. Reg. § 1.409A-1(h)), or (ii) the date of your death (the “Delay Period”). Within 10 days following the expiration of the Delay Period, all payments and benefits delayed pursuant to this Section (whether they would have otherwise been payable in a single sum or in installments in the absence of such delay) will be paid or reimbursed to you in a lump sum, and any remaining payments and benefits due under this Agreement will be paid or provided in accordance with the normal payment dates specified for them herein. To the extent that the foregoing applies to the provision of any ongoing welfare benefits to you that would not be required to be delayed if the premiums therefore were paid by you, you will pay the full costs of premiums for such welfare benefits during the Delay Period and the Corporation or the Bank will pay you an amount equal to the amount of such premiums paid by you during the Delay Period within 10 days after the conclusion of such Delay Period. 8.2 Except as otherwise expressly provided herein, to the extent any expense reimbursement or other in-kind benefit is determined to be subject to Code Section 409A, the amount of any such expenses eligible for reimbursement or in-kind benefits in one calendar year will not affect the expenses eligible for reimbursement or in-kind benefits in any other taxable year (except under any lifetime limit applicable to expenses for medical care), in no event will any expenses be reimbursed or in-kind benefits be provided after the last day of the calendar year following the calendar year in which you incurred such expenses or received such benefits, and in no event will any right to reimbursement or in-kind benefits be subject to liquidation or exchange for another benefit. 8.3 Any payments made pursuant to Section 2.1, to the extent of payments made from the date of termination through March 15th of the calendar year following such date, are intended to constitute separate payments for purposes of Treas. Reg. §1.409A-2(b)(2) and thus payable pursuant to the “short-term deferral” rule set forth in Treas. Reg. §1.409A-1(b)(4); to the extent such payments are made following said March 15th, they are intended to constitute separate payments for purposes of Treas. Reg. §1.409A-2(b)(2) made upon an involuntary termination from service and payable pursuant to Treas. Reg. §1.409A-1(b)(9)(iii), to the maximum extent permitted by said provision. 8.4 To the extent it is determined that any benefits described in Section 2.1(b) are taxable to you, they are intended to be payable pursuant to Treas. Reg. §1.409A-1(b)(9)(v), to the maximum extent permitted by said provision.
FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES 52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) 52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) - ALTERNATE I (JUL 1985) 52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) - ALTERNATE II (JUL 1985) 52.246-03 INSPECTION OF SUPPLIES -- COST-REIMBURSEMENT (MAY 2001) 52.246-04 INSPECTION OF SERVICES -- FIXED-PRICE (AUG 1996) 52.246-05 INSPECTION OF SERVICES -- COST-REIMBURSEMENT (APR 1984) 52.246-06 INSPECTION -- TIME-AND-MATERIAL AND LABOR-HOUR (MAY 2001) 52.246-06 INSPECTION -- TIME-AND-MATERIAL AND LABOR-HOUR (MAY 2001) - ALTERNATE I (APR 1984) 52.246-15 CERTIFICATE OF CONFORMANCE (APR 1984) 52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
DEFENSE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES 252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)
