Ranks for Faculty Sample Clauses

Ranks for Faculty. All limited-term, tenure-track and tenured faculty appointments under this Collective Agreement will be made at the ranks of Lecturer, Assistant Professor, Associate Professor or Professor.
AutoNDA by SimpleDocs
Ranks for Faculty. (a) All appointments under this Collective Agreement will be made in the following ranks: Professor, Associate Professor, Assistant Professor, or Lecturer. (b) The ranks Professor, Associate Professor, Assistant Professor and Lecturer are defined as being those traditionally understood as such in Nipissing University practice.

Related to Ranks for Faculty

  • DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.

  • Names of Stewards The Union shall notify the Employer in writing of the name of each Xxxxxxx and the department(s) he represents and the name of the Chief Xxxxxxx, before the Employer shall be required to recognize him.

  • Accounts for Minors We may require any account established by a minor to be a joint account with an owner who has reached the age of majority under state law and who shall be jointly and severally liable to us for any returned item, overdraft, or unpaid charges or amounts on such account. We may pay funds directly to the minor without regard to his or her minority. Unless a guardian or parent is an account owner, the guardian or parent shall not have any account access rights. We have no duty to inquire about the use or purpose of any transaction. We will not change the account status when the minor reaches the age of majority, unless authorized in writing by all account owners.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Reservations for Registry Operations The following ASCII labels must be withheld from registration or allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: WWW, RDDS and WHOIS. The following ASCII label must be allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: NIC. Registry Operator may activate WWW, RDDS and WHOIS in the DNS, but must activate NIC in the DNS, as necessary for the operation of the TLD. None of WWW, RDDS, WHOIS or NIC may be released or registered to any person (other than Registry Operator) or third party. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD all such withheld or allocated names shall be transferred as specified by ICANN. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator may activate in the DNS at All Levels up to one hundred (100) names (plus their IDN variants, where applicable) necessary for the operation or the promotion of the TLD. Registry Operator must act as the Registered Name Holder of such names as that term is defined in the then-current ICANN Registrar Accreditation Agreement (RAA). These activations will be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator must either (i) register such names through an ICANN-accredited registrar; or (ii) self-allocate such names and with respect to those names submit to and be responsible to ICANN for compliance with ICANN Consensus Policies and the obligations set forth in Subsections 3.7.7.1 through 3.7.7.12 of the then-current RAA (or any other replacement clause setting out the terms of the registration agreement between a registrar and a registered name holder). At Registry Operator’s discretion and in compliance with all other terms of this Agreement, such names may be released for registration to another person or entity. Registry Operator may withhold from registration or allocate to Registry Operator names (including their IDN variants, where applicable) at All Levels in accordance with Section 2.6 of the Agreement. Such names may not be activated in the DNS, but may be released for registration to another person or entity at Registry Operator’s discretion. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names that remain withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Upon ICANN’s request, Registry Operator shall provide a listing of all names withheld or allocated to Registry Operator pursuant to Section 2.6 of the Agreement. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.

  • Offices for Payments, etc So long as any of the Securities remain outstanding, the Issuer will maintain in the Borough of Manhattan, The City of New York, the following for each series: an office or agency (a) where the Securities may be presented for payment, (b) where the Securities may be presented for registration of transfer and for exchange as in this Indenture or any supplemental indenture provided and (c) where notices and demands to or upon the Issuer in respect of the Securities or of this Indenture may be served. The Issuer will give to the Trustee written notice of the location of any such office or agency and of any change of location thereof. Unless otherwise specified in accordance with Section 2.03, the Issuer hereby initially designates the Corporate Trust Office of the Trustee, as the office to be maintained by it for each such purpose. In case the Issuer shall fail to so designate or maintain any such office or agency or shall fail to give such notice of the location or of any change in the location thereof, presentations and demands may be made and notices may be served at the Corporate Trust Office. The Issuer may from time to time designate one or more additional offices or agencies where the Securities of a series may be presented for payment, where the Securities of that series may be presented for exchange as provided in this Indenture and pursuant to Section 2.03 and where the Securities of that series may be presented for registration of transfer as provided in this Indenture, and the Issuer may from time to time rescind any such designation, as the Issuer may deem desirable or expedient; provided, however, that no such designation or rescission shall in any manner relieve the Issuer of its obligation to maintain the agencies provided for in this Section. The Issuer will give to the Trustee prompt written notice of any such designation or rescission thereof.

  • Audit Requirements for Recipients of State Financial Assistance For purposes of this paragraph, the word "Contractor" shall be deemed to mean "nonstate entity," as that term is defined in section 4-230 of the Connecticut General Statutes. The Contractor shall provide for an annual financial audit acceptable to the Client Agency for any expenditure of State awarded funds made by the Contractor. Such audit shall include management letters and audit recommendations. The State Auditors of Public Accounts shall have access to all records and accounts for the fiscal year(s) in which the award was made. The Contractor shall comply with federal and State single audit standards as applicable.

  • Requirements for E- Bidders 3.1. For Individual/ Joint E-Bidders, the following documents shall be uploaded during online registration; 3.1.1. Copy of Identification Documents (both sides) 3.1.2. Evidence of deposit payment 3.2. For Agent acting for Individual/ Joint Online Bidders, the following documents shall be uploaded during online registration; 3.2.1. Copy of Identification Documents (both sides) of Individual/ Joint Online Bidder 3.2.2. Copy of Identification Documents (both sides) of Agent 3.2.3. Copy of letter of authorization to bid 3.2.4. Evidence of deposit payment 3.3. For Company, the following documents shall be uploaded during online registration: 3.3.1. Copy of Identification Documents (both sides) of the representative. 3.3.2. Copy of letter of authorization to bid under the Company’s Letter Head 3.3.3. Form 24; Form 44; Form 49 (or their equivalent forms under the Companies Act 2016)

  • GUIDELINES FOR REVIEWS We may provide you areas on the Site to leave reviews or ratings. When posting a review, you must comply with the following criteria: (1) you should have firsthand experience with the person/entity being reviewed; (2) your reviews should not contain offensive profanity, or abusive, racist, offensive, or hate language; (3) your reviews should not contain discriminatory references based on religion, race, gender, national origin, age, marital status, sexual orientation, or disability; (4) your reviews should not contain references to illegal activity; (5) you should not be affiliated with competitors if posting negative reviews; (6) you should not make any conclusions as to the legality of conduct; (7) you may not post any false or misleading statements; and (8) you may not organize a campaign encouraging others to post reviews, whether positive or negative. We may accept, reject, or remove reviews in our sole discretion. We have absolutely no obligation to screen reviews or to delete reviews, even if anyone considers reviews objectionable or inaccurate. Reviews are not endorsed by us, and do not necessarily represent our opinions or the views of any of our affiliates or partners. We do not assume liability for any review or for any claims, liabilities, or losses resulting from any review. By posting a review, you hereby grant to us a perpetual, non-exclusive, worldwide, royalty-free, fully-paid, assignable, and sublicensable right and license to reproduce, modify, translate, transmit by any means, display, perform, and/or distribute all content relating to reviews.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!