Raw Materials Lonza shall procure all required Raw Materials as well as consumables other than those Raw Materials that are Customer Materials. Customer shall be responsible for payment for all consumables and Raw Materials ordered or irrevocably committed to be procured by Lonza hereunder. Upon cancellation of any Batch or termination of the Agreement, all unused Raw Materials shall be paid for by Customer within [***] days of invoice and at Customer’s option will either be (a) held by Lonza for future use for the production of Product, (b) delivered to Customer, or (c) disposed of by Lonza.
Commercial Supply Celgene shall Manufacture and supply all Commercial Supplies.
Clinical Supply Takeda will provide to Licensee[***] the amount of TAK-385 Licensed Compound or TAK-385 Licensed Products needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan (estimated by Licensee as of the Effective Date to be [***]), solely to the extent that Takeda can supply such TAK-385 [***] = Portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment requested under 17 C.F.R. Sections 200.80(b)(4) and 230.406. Licensed Compound or TAK-385 Licensed Products (a) from its supply of TAK-385 Licensed Compound or TAK-385 Licensed Products in existence as of the Effective Date and which supply can be used for its intended purposes without further re-processing (the “Initial Clinical Supply”) and (b) after retaining the amount needed by Takeda for Clinical Trials in the Takeda Territory. Takeda will also provide to Licensee, at [***] any additional supplies of TAK-385 Licensed Compound or TAK-385 Licensed Products in excess of the Initial Clinical Supply needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan. Within [***] days after the Effective Date, the Parties will enter into a manufacturing and supply agreement (the “Takeda Clinical Manufacturing and Supply Agreement”), which will govern the terms and conditions of the Manufacturing and supply of the TAK-385 Licensed Compound and TAK-385 Licensed Products (including the Initial Clinical Supply) by Takeda to Licensee for Development purposes, including the exact quantities and the timelines for delivery. The Parties will negotiate the terms and conditions of such Takeda Clinical Manufacturing and Supply Agreement in good faith for a period of [***] days (as may be extended upon agreement of the Parties). As part of the negotiation related to the Takeda Clinical Manufacturing and Supply Agreement, the Parties shall discuss in good faith the ability of Takeda to supply to Licensee [***]. If the Parties have not entered into a definitive agreement within such negotiation period, then the final terms and conditions of such agreement will be resolved in accordance with Section 8.2 (Arbitration for Failure to Agree).
Borrower Products Except as described on Schedule 5.11, no Intellectual Property owned by Borrower or Borrower Product has been or is subject to any actual or, to the knowledge of Borrower, threatened litigation, proceeding (including any proceeding in the United States Patent and Trademark Office or any corresponding foreign office or agency) or outstanding decree, order, judgment, settlement agreement or stipulation that restricts in any manner Borrower’s use, transfer or licensing thereof or that may affect the validity, use or enforceability thereof. There is no decree, order, judgment, agreement, stipulation, arbitral award or other provision entered into in connection with any litigation or proceeding that obligates Borrower to grant licenses or ownership interest in any future Intellectual Property related to the operation or conduct of the business of Borrower or Borrower Products. Borrower has not received any written notice or claim, or, to the knowledge of Borrower, oral notice or claim, challenging or questioning Borrower’s ownership in any Intellectual Property (or written notice of any claim challenging or questioning the ownership in any licensed Intellectual Property of the owner thereof) or suggesting that any third party has any claim of legal or beneficial ownership with respect thereto nor, to Borrower’s knowledge, is there a reasonable basis for any such claim. Neither Borrower’s use of its Intellectual Property nor the production and sale of Borrower Products infringes the Intellectual Property or other rights of others.
Product Supply The Parties shall reasonably cooperate and assist each other in transferring ownership of Product drug product and/or Product drug substance (such material, CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. collectively, the “Product Lots”) set forth in Exhibit A attached hereto as promptly as reasonably practicable following the Effective Date; provided, however, that neither Party shall be required to pay money to any Third Party, commence any litigation with, or offer or grant any accommodation (financial or otherwise) to any Third Party. Such Product Lots shall be delivered EXW (Ex Works) (Incoterms 2010) AMGEN, Thousand Oaks, California. Any expense for shipment shall be borne by AKERO (including any import or export duties or taxes). Subject to the terms of this Section 5.4 and Section 6.2 (Additional AMGEN Warranties), AMGEN transfers the Product Lots to AKERO “as is”, and makes no other representation to AKERO in connection therewith. The Parties have entered into a Quality Agreement substantially in the form attached hereto as Exhibit F, dated as of the date hereof, governing the quality of the Product Lots to be supplied pursuant to this Section 5.4. For the avoidance of doubt, Product Lots consisting of drug product as set forth in Exhibit A supplied pursuant to this Section 5.4 shall be labeled for their intended clinical use as set forth in Exhibit A and the labeling of any Product drug product manufactured after the Effective Date shall be the responsibility of AKERO. Except for the Licensed Materials and such Product Lots to be transferred to AKERO, AKERO shall be responsible for, and shall bear the cost of, obtaining (whether by manufacturing or causing to be manufactured) research, clinical and commercial supplies of the Product. From and after the Effective Date, AKERO shall be responsible for all costs and expenses in connection with the storage of, and any stability studies performed on, the Product Lots.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
Supply of Product Salix shall use reasonable efforts to supply the Product during the Co-Promotion Period in sufficient quantities to satisfy the levels of Product sales forecasted in the then current Marketing Plan. Salix shall maintain reasonable inventory levels of the Product in order to ensure their ability to fulfill this obligation. Salix shall have the sole responsibility and right to fill orders with respect to the Product. Altana shall not solicit orders for the Product but, if for any reason, Altana shall receive an order for the Product, Altana shall promptly forward to Salix any such orders. All orders for Product shall be subject to acceptance by Salix, in its sole discretion, which acceptance shall not be unreasonably withheld. Salix may cancel any order for Product at any time after acceptance without incurring any liability to Altana. Salix shall be solely responsible for responding to requests from Target Physicians for individual patients who need the Product but are unable to afford it. Any such request shall be forwarded by Altana to Salix for processing. Salix shall have the sole right and responsibility for establishing and modifying the terms and conditions of the sale of the Product, including (a) the price at which the Product will be sold, (b) whether the Product will be subject to trade or quantity discounts, (c) whether any discount will be provided for payments on accounts receivable, (d) whether the Product will be subject to rebates, returns and allowances or retroactive price reductions, (e) the channels of distribution of the Product, and (f) whether credit [*] Confidential treatment requested; certain information omitted and filed separately with the SEC. is to be granted or refused in connection with any sale of Product. In the event that Salix fails to supply the Product as required pursuant to this Agreement for any reason other than a Force Majeure, which such failure results in lost sales for Altana, the Parties shall meet and attempt to negotiate a mutually agreeable and commercially reasonable solution. If the Parties cannot reach such an agreement within a reasonable period of time, the issue will be dealt with as contemplated under Section 4.4 of this Agreement.
Supply of Products During the term of this Agreement and any extension hereof, the Seller shall sell and supply the products as set out in Schedule 1 hereto (“Products”) to SiPM and SiPM shall buy from the Seller such Products on a non-exclusive basis. The specifications of the Products are set out in Schedule 2 hereto. SUPPLY AGREEMENT - SiPM A Supply Agreement is a document between two parties, a Supplier and a Purchaser. The Supplier can be an individual or business and is the party that " supplies," or sells, the goods to the Purchaser. The Purchaser can also be an individual or a business and is the party that purchases for its use the goods that the Supplier provides.
Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
Manufacture of Product Prior to commercialization of the Product, the Parties may, if appropriate for both parties, negotiate in good faith a manufacturing and supply agreement to provide for Licensor to fulfill the manufacturing requirements of Licensee for Product for sale in the European market. The cost of such manufacturing shall not be greater than * percent (*%) of the cost of any competitor cGMP contract manufacturing facility that proposes to manufacturer the Product for Licensee. * Confidential information has been omitted and filed confidentially with the Securities and Exchange Commission.
