Common use of Receipt Point Gas Quality Specifications Clause in Contracts

Receipt Point Gas Quality Specifications. Gas delivered by or for the account of Producer to each Receipt Point shall meet the following specifications (collectively, the “Gas Quality Specifications”): (a) The Gas shall not contain any of the following in excess of: one-quarter (1/4) grain of hydrogen sulfide per hundred (100) Cubic Feet; one (1) grain of total sulfur per hundred (100) Cubic Feet; two one-hundredths of one percent (0.02%) by volume of oxygen; or two percent (2%) by volume of nitrogen. (b) The total of all non-hydrocarbon gases shall not exceed three percent (3%) by volume. (c) The temperature of the Gas at the Receipt Point shall not be less than forty (40) degrees Fahrenheit or in excess of one hundred twenty (120) degrees Xxxxxxxxxx. (x) The Gas shall be free of solids, sand, salt, dust, gums, crude oil, and hydrocarbons in the liquid phase, and other objectionable substances which may be injurious to pipelines or which may interfere with the measurement, transmission or commercial utilization of said Gas. (e) The Gas shall have a Gross Heating Value of less than 1100 Btu per million cubic feet of Gas. (f) Prior to the installation of a System Compressor Station placing a Receipt Points(s) on suction, each Receipt Point shall have a water vapor content of five (5) pounds per Cubic Foot of Gas. Except for items (a) through (f) above, such Gas shall meet the most restrictive quality specifications required from time to time by the Downstream Pipelines receiving Delivery Point Gas, except for water vapor content, for which there shall be no specification applicable at the Receipt Points.

Receipt Point Gas Quality Specifications. Gas delivered by or for the account of Producer to each Receipt Point shall meet the following specifications (collectively, the “Gas Quality Specifications”): (a) The Gas shall not contain any of the following in excess of: one-quarter (1/4) grain of hydrogen sulfide per hundred (100) Cubic Feet; one (1) grain of total sulfur per hundred (100) Cubic Feet; two one-hundredths of one percent (0.02%) by volume of oxygen; or two percent (2%) by volume of nitrogen. (b) The total of all non-hydrocarbon gases shall not exceed three percent (3%) by volume. (c) The temperature of the Gas at the Receipt Point shall not be less than forty (40) degrees Fahrenheit or in excess of one hundred twenty (120) degrees XxxxxxxxxxFahrenheit. (xd) The Gas shall be free of solids, sand, salt, dust, gums, crude oil, and hydrocarbons in the liquid phase, and other objectionable substances which may be injurious to pipelines or which may interfere with the measurement, transmission or commercial utilization of said Gas. (e) The Gas shall have a Gross Heating Value of less than 1100 Btu per million cubic feet of Gas. (f) Prior to the installation of a System Compressor Station placing a Receipt Points(s) on suction, each Receipt Point shall have a water vapor content of five (5) pounds per Cubic Foot of Gas. Except for items (a) through (fSection 10.1(f) above, such Gas shall meet the most restrictive quality specifications required from time to time by the Downstream Pipelines receiving Delivery Point Gas, except that for water vapor contenteach Receipt Point other than the Goliath Receipt Point, for which there shall be no specification applicable at the Receipt Pointswater vapor content specification.