Recycled Material Sample Clauses

Recycled Material. Wherever possible, the County of Riverside is looking for items made from, or containing in part, recycled material. Bidders are encouraged to bid items containing recycled material as an alternative for the items specified; however, the County reserves the right to reject those alternatives as nonresponsive.
Sample 1Sample 2
AutoNDA by SimpleDocs
Recycled Material. The Department encourages the use of products and materials with recycled content and post-consumer recovered materials. If the item(s) specified in the Technical Specification is available with recycled content, we request that you provide product information to help in our search for recycled products. However, this bid request is for the product as specified herein and does not require prices for recycled product. This information should be sent as part of your bid response or may be sent separately.
Sample 1
Recycled Material. One hundred percent (100%) of the paper stock must contain at least 30 percent (30%) postconsumer recycled materials. The recycled paper must meet the requirements for procuring recycled printing paper as provided in the federal Resource Conservation and Recovery Act of 1976 (RCRA), as amended, 42 U.S.C. § 6962, and set forth in 40 C.F.R., pt. 247, and in related executive orders or advisory notices issued by the United States Environmental Protection Agency.
Sample 1
Recycled Material. 1.16.2.1 In its contracts with Processors entered into after September 1, 2011, BRI agrees to use its commercially reasonable efforts to require Processors to retain records for audit purposes by, and make such records available to, the Ministry and/or its appointee appointed pursuant to section 1.15 of this Schedule 1 to conduct audits of recycled materials. 1.16.2.2 BRI agrees to retain for audit purposes and make available to the Ministry and/or its appointee appointed pursuant to section 1.15 of this Schedule 1:  calculations by BRI Return Locations showing the conversion of Program Containers redeemed to weight using standard average weight by Deposit Category;  monthly calculations to determine standard Deposit Category weights;  complete audit trail of recycled material (e.g. retail/depot shipping bills of lading indicated by recycling category and by carrier);  verifiable written semi-monthly assurance from Processors that Processors are complying with environmental performance requirements set forth in Part C of this Schedule 1;  a semi-annual written outline of the processing, by weight, of the following Program Containers and Secondary Packaging collected by BRI under the Contract during such period through to the point of final processing and disposition (that is, to the point of sale to an end user of such processed Program Containers and Secondary Packaging, but excluding such end user itself), that includes a general description, by weight, of how the materials were processed by each Processor (and each sub-processor thereof) during such period, shall be provided to the Ministry on or before the end of the fourth month following each semi- annual period ending April 30 and October 30 in each year: (i) glass Program Containers, (ii) Program Cans, (iii) PET Program Containers, and (iv) Secondary Packaging; and  a semi-annual written report from each Processor of the amount, by weight, of the following Program Containers and Secondary Packaging collected by BRI under the Contract during such period sent by such Processor to landfill or incinerated due to contamination or for other reasons specified in paragraph (l)(ii) of Part C Environmental Performance Requirements of Schedule 1 during such period shall be provided to the Ministry on or before the end of the fourth month following each semi• annual period ending April 30 and October 30 in each year: (i) glass Program Containers, (ii) Program Cans, (iii) PET Program Containers, and (iv) ...
Sample 1
Recycled Material. −Recycled paper products, structural materials made from recycled plastics, re-refined lubricating oils, reclaimed solvents, recycled asphalt and concrete, recycled glass products, re-treaded tires, ferrous metals containing recycled scrap metals and all other materials that contain waste materials generated by a business or consumer, materials that have served their intended purpose, and/or materials that have been separated from solid waste for collection, recycling and disposition in the percentage determined by the State as provided by Law.
Sample 1
Recycled Material. Not Applicable.
Sample 1
AutoNDA by SimpleDocs
Recycled Material. The use of Recycled Asphalt Pavement (RAP) shall be limited to a maximum of fifteen percent (15%). The exact amount of RAP shall be approved by the Engineer. Contractor must submit mix design for approval. Mix design shall be of recent or present date.
Sample 1
Recycled Material. The use of recycled material from any off-site source will not be permitted.
Sample 1

Related to Recycled Material

  • Stored Materials The Department shall not be required to pay for materials stored at the site or stored at other locations absent prior written authorization to do so, which authorization may be withheld at the Department's sole discretion. If the Department expressly agrees to pay for materials stored at the site but not yet incorporated into the Work, the Application for Payment may also include a request for payment of the cost of such materials, if the materials have been delivered to the site, and suitably stored. Such requests shall be documented by appropriate invoices and bills of sale. Payment for stored materials shall be conditioned also on the Design-Builder’s representation that it has inspected the material and found it to be free from defect and otherwise in conformity with this Agreement, and on satisfactory evidence that the materials are insured under the builder’s risk policy. Further, if the Design-Builder requests the Department to allow payments for storage of materials offsite, the Design-Builder shall be required, inter alia, to agree to execution of proper documentation to afford the Department a secured interest in the materials upon payment.

  • Recycled Products The Contractor agrees to comply with all the requirements of Section 6002 of the Resource Conservation and Recovery Act (RCRA), as amended (42 U.S.C. 6962), including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order 12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part 247. References: 42 U.S.C. 6962, 40 CFR Part 247, Executive Order 12873 (More than $10,000)

  • Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Use of Recycled Products Consultant shall prepare and submit all reports, written studies and other printed material on recycled paper to the extent it is available at equal or less cost than virgin paper.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • Dangerous Materials Tenant shall not keep or have on the Premises any article or thing of a dangerous, flammable, or explosive character that might substantially increase the danger of fire on the Premises, or that might be considered hazardous by a responsible insurance company, unless the prior written consent of Landlord is obtained and proof of adequate insurance protection is provided by Tenant to Landlord.

  • Security of All Software Components Supplier will inventory all software components (including open source software) used in Deliverables, and provide such inventory to Accenture upon request. Supplier will assess whether any such components have any security defects or vulnerabilities that could lead to a Security Incident. Supplier will perform such assessment prior to providing Accenture with access to such software components and on an on-going basis thereafter during the term of the Agreement. Supplier will promptly notify Accenture of any identified security defect or vulnerability and remediate same in a timely manner. Supplier will promptly notify Accenture of its remediation plan. If remediation is not feasible in a timely manner, Supplier will replace the subject software component with a component that is not affected by a security defect or vulnerability and that does not reduce the overall functionality of the Deliverable(s).

  • Time and Materials If this contract is designated as a Time and Materials contract, invoicing and payment shall be as follows: (a) Consultant shall submit invoices, not more often than once a month during the term of this agreement, based on the cost for work performed in accordance with the Rate Schedule in the Scope of Work and authorized reimbursable expenses incurred prior to the invoice date. Invoices shall contain the following information: (i) Serial identifications of bills, i.e., Xxxx No. 1; (ii) The beginning and ending dates of the billing period; (iii) A summary containing the total contract amount, the amount of prior xxxxxxxx, the total due this period, percentage of work completed, the remaining balance available for all remaining billing periods, and a brief description of work completed during the billing period. (b) City shall make monthly payments, based on such invoices, for satisfactory progress in completion of the Scope of Work, and for authorized reimbursable expenses incurred.

  • Customer Materials Subject to Section 4(a), all right, title and interest (including all Intellectual Property Rights) in and to the Customer Materials are owned by Customer or Customer’s suppliers.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!