Common use of Recycling Services Clause in Contracts

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services. All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged. (i) Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs. Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable. Glass may not be accepted at all locations. Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof. All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company from time-to-time. Company reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials. (ii) Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Waste, Excluded Materials or other materials that are deleterious or capable of causing material damage to any part of Company’s property, its personnel or the public or materially impair the strength or the durability of Company’s structures or equipment. (iii) Company may reject in whole or in part, or may process, in its sole discretion, Recyclable Materials not meeting the specifications. Customer shall pay Company for all increased costs, losses and expenses incurred with respect to such non-conforming Recyclable Materials which charges may include an amount for Company’s operating or profit margin (collectively the “Cost”). Without limiting the foregoing, Customer shall pay a contamination charge for additional handling, processing, transporting and/or disposing of such non-conforming Recyclable Materials, Special Waste, Excluded Materials, and/or all of part of non-conforming loads and additional charges may be assessed for bulky items such as appliances, concrete, furniture, mattresses, tires, electronics, pallets, yard waste, propane tanks, etc. Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. (iv) Recycling Services are subject to a Recyclable Material Offset (RMO) charge to the extent that (a) Company’s processing cost per ton, including costs of disposal for contamination, plus profit margin, exceeds (b) an amount equal to recyclables value per ton minus an amount for profit margin. The RMO charge, including profit margin, processing and disposal costs and recyclable value shall be determined by Company from time-to-time, in its sole discretion, based on applicable operating data and market information. If recyclables value exceeds processing costs, plus profit margin, a RMO credit may apply, at Company’s sole discretion. (v) Where Company has agreed in writing to provide a market-based rebate to Customer, the following shall apply. Customer acknowledges that the market value for Recyclable Materials will fluctuate based upon various factors, and such materials may at times have no value or that the value may be negative. Company will establish the value of Recyclable Materials each month based upon such various factors, including but not limited to quantity, quality and location. For recycling services, Company shall pay or charge Customer on or about the last day of each month for Recyclable Materials accepted during the preceding month, after deduction of any charges owed to Company by Customer. Any invoice shall be payable upon receipt. Where recycling services are provided, charges may include separate fuel and environmental surcharges as set forth at xxx.xx.xxx.

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services. Services: All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged. (i) . Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs. Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable. Glass may not be accepted at all locations. Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof. All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company WMNS from time-to-time. Company WMNS reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials. (ii) . Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Nonconforming Waste, Excluded Materials Hazardous Waste, Special Waste or other materials that are deleterious or capable of causing material damage to any part of Company’s WMNS' property, its personnel or the public or materially impair the strength or the durability of Company’s WMNS' structures or equipment. (iii) Company . WMNS may reject in whole or in part, or may process, in its sole discretion, Recyclable Materials not meeting the specifications. Customer shall pay Company WMNS for all increased costs, losses and expenses incurred with respect to such non-conforming Recyclable Materials which charges may include an amount for Company’s WMNS’ operating or profit margin (collectively the “Cost”). Without limiting the foregoing, and Customer shall pay a contamination charge for additional handling, processing, transporting and/or disposing of such non-conforming Recyclable Materials, Hazardous Waste, Special Waste, Excluded MaterialsNonconforming Waste, and/or all of part of non-conforming loads and additional charges may be assessed for bulky items such as appliances, concrete, furniture, mattresses, tires, electronics, pallets, yard waste, propane tanks, etc. Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. (iv) Recycling Services are subject to a Recyclable Material Offset (RMO) charge to the extent that (a) Company’s WMNS’ processing cost per ton, including costs of disposal for contamination, plus contamination and profit margin, exceeds (b) an amount equal to recyclables value per ton minus an amount for profit margin. The RMO charge, including profit margin, processing and disposal costs and recyclable value shall be determined by Company WMNS from time-to-time, in its sole discretion, based on applicable operating data and market information. If recyclables value exceeds processing costs, plus profit margin, a RMO credit may apply, at Company’s WMNS’ sole discretion. (v) Where Company has agreed in writing to provide a market-based rebate to Customer, the following shall apply. Customer acknowledges that the market value for Recyclable Materials will fluctuate based upon various factors, and such materials may at times have no value or that the value may be negative. Company will establish the value of Recyclable Materials each month based upon such various factors, including but not limited to quantity, quality and location. For recycling services, Company shall pay or charge Customer on or about the last day of each month for Recyclable Materials accepted during the preceding month, after deduction of any charges owed to Company by Customer. Any invoice shall be payable upon receipt. Where recycling services are provided, charges may include separate fuel and environmental surcharges as set forth at xxx.xx.xxx.

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services. services All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged. unbagged (i) Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs. tubs Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable. unacceptable Glass may not be accepted at all locations. locations Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof. thereof All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company from time-to-time. time Company reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials. materials (ii) Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Waste, Excluded Materials or other materials that are deleterious or capable of causing material damage to any part of Company’s property, its personnel or the public or materially impair the strength or the durability of Company’s structures or equipment. (iii) Company may reject in whole or in part, or may process, in its sole discretion, Recyclable Materials not meeting the specifications. Customer shall pay Company for all increased costs, losses and expenses incurred with respect to such non-conforming Recyclable Materials which charges may include an amount for Company’s operating or profit margin (collectively the “Cost”). Without limiting the foregoing, Customer shall pay a contamination charge for additional handling, processing, transporting and/or disposing of such non-conforming Recyclable Materials, Special Waste, Excluded Materials, and/or all of part of non-conforming loads and additional charges may be assessed for bulky items such as appliances, concrete, furniture, mattresses, tires, electronics, pallets, yard waste, propane tanks, etc. Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. (iv) Recycling Services are subject to a Recyclable Material Offset (RMO) charge to the extent that (a) Company’s processing cost per ton, including costs of disposal for contamination, plus profit margin, exceeds (b) an amount equal to recyclables value per ton minus an amount for profit margin. The RMO charge, including profit margin, processing and disposal costs and recyclable value shall be determined by Company from time-to-time, in its sole discretion, based on applicable operating data and market information. If recyclables value exceeds processing costs, plus profit margin, a RMO credit may apply, at Company’s sole discretion. (v) Where Company has agreed in writing to provide a market-based rebate to Customer, the following shall apply. Customer acknowledges that the market value for Recyclable Materials will fluctuate based upon various factors, and such materials may at times have no value or that the value may be negative. Company will establish the value of Recyclable Materials each month based upon such various factors, including but not limited to quantity, quality and location. For recycling services, Company shall pay or charge Customer on or about the last day of each month for Recyclable Materials accepted during the preceding month, after deduction of any charges owed to Company by Customer. Any invoice shall be payable upon receipt. Where recycling services are provided, charges may include separate fuel and environmental surcharges as set forth at xxx.xx.xxx.

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services. All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged. (i) Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs. Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable. Glass may not be accepted at all locations. Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof. All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company from time-to-time. Company reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials. (ii) Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Waste, Excluded Materials or other materials that are deleterious or capable of causing material damage to any part of Company’s property, its personnel or the public or materially impair the strength or the durability of Company’s structures or equipment. (iii) Company may reject in whole or in part, or may process, in its sole discretion, Recyclable Materials not meeting the specifications. Customer shall pay Company for all increased costs, losses and expenses incurred with respect to such non-conforming Recyclable Materials which charges may include an amount for Company’s operating or profit margin (collectively the “Cost”). Without limiting the foregoing, Customer shall pay a contamination charge for additional handling, processing, transporting and/or disposing of such non-conforming Recyclable Materials, Special Waste, Excluded Materials, and/or all of part of non-conforming loads and additional charges may be assessed for bulky items such as appliances, concrete, furniture, mattresses, tires, electronics, pallets, yard waste, propane tanks, etc. Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. (iv) Recycling Services are subject to a Recyclable Material Offset (RMO) charge to the extent that (a) Company’s processing cost per ton, including costs of disposal for contamination, plus profit margin, exceeds (b) an amount equal to recyclables value per ton minus an amount for profit margin. The RMO charge, including profit margin, processing and disposal costs and recyclable value shall be determined by Company from time-to-time, in its sole discretion, based on applicable operating data and market information. If recyclables value exceeds processing costs, plus profit margin, a RMO credit may apply, at Company’s sole discretion. (v) Where Company has agreed in writing to provide a market-based rebate to Customer, the following shall apply. Customer acknowledges that the market value for Recyclable Materials will fluctuate based upon various factors, and such materials may at times have no value or that the value may be negative. Company will establish the value of Recyclable Materials each month based upon such various factors, including but not limited to quantity, quality and location. For recycling services, Company shall pay or charge Customer on or about the last day of each month for Recyclable Materials accepted during the preceding month, after deduction of any charges owed to Company by Customer. Any invoice shall be payable upon receipt. Where recycling processing services are provided, charges Charges may include separate fuel and environmental surcharges for recycling services as set forth at xxx.xx.xxx.