Repair Requirements Sample Clauses

Repair Requirements. All Repairs and replacement parts used in connection with Repairs shall be (A) free of Encumbrances, (B) in compliance with the terms of any manufacturer’s warranties and (C) in as good operating condition as, and have a value, utility and remaining useful life equal to or better than the part being replaced (assuming such parts were in the condition and repair required by the terms hereof) so that in no material way will the Solar Cells not achieve at least the same fair market value and that no replacement parts shall change the Solar Cells such that it would (x) not be commercially feasible for the Solar Cells or any part thereof to be used by Solar Cell Owners or a Third Party upon return or (y) diminish the value, utility, residual value or remaining useful life of the Solar Cells.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Repair Requirements. If Party B needs Repair service, please dial the phone number of the engineering department: 6439 2966-8061 or 6439 2000-0000, or contact the Floor Supervisor. Please try to tell in details of the trouble to help the engineers make correct decision and solve the problems in time.
Sample 1Sample 2
Repair Requirements. To the best of Seller's knowledge, there are no outstanding requirements or recommendations by any mortgagee or any insurance company, requiring or recommending any repairs or work to be done on any of the Restaurants.
Sample 1
Repair Requirements. The Contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to return the items (see Attachment A for a list of these items) to a Ready For Issue (RFI) condition. RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate. The Contractor shall identify on Attachment G the governing repair manual(s)/ documents for each item covered by this BOA. On the same attachment, the Contractor must identify the facility for each item where repair, including final test and inspection, is completed. 1.2.1. Changes to repair manuals/documents and changes to drawings or specifications for the manufacture of parts utilized in these repairs require Procuring Contracting Officer (PCO) approval. In addition, as provided for in Section 2.3, requests for changes to a repair source or repair facility shall be submitted in writing to the PCO and must be approved prior to making any such change. 1.2.2. Any repairs performed using unapproved changes to manuals, drawings, specifications, or unapproved changes to a repair source or facility are not permitted. 1.2.3. The Contractor is not entitled to any equitable adjustment to the price or BOA terms based on the Government’s disapproval of a requested change to manuals, drawings, specifications, or to a repair source or facility.
Sample 1
Repair Requirements. 17 9. Liens................................................................17 10.
Sample 1
Repair Requirements. All repairs and replacements made by or on behalf of Tenant or any person or entity claiming through or under Tenant shall be made and performed (a) at Tenant's cost and expense in a good and workmanlike manner by licensed and reputable contractors and mechanics so that such repairs and replacements shall be at least equal in quality, value and utility to the original work or installation; and (b) in accordance with any applicable Rules and Regulations and with all Legal Requirements (as defined in Article 10).
Sample 1
Repair Requirements. Xxxxxx xx set forth in Exhibit "J", to Seller's Knowledge, there are no outstanding requirements or recommendations by any person, mortgagee or insurance company requiring or recommending any repairs or work to be done on the Facility.
Sample 1
AutoNDA by SimpleDocs
Repair Requirements. Except as set forth in Exhibit "E", to Seller's Knowledge, there are no outstanding requirements or recommendations by any person, mortgagee or insurance company, requiring or recommending any repairs or work to be done on any of the Facilities. Purchaser acknowledges receipt of the reports set forth as Exhibit "E". Seller agrees that any deferred maintenance items, set forth on Exhibit "E", are the responsibility of Seller. Pursuant to Section 2.03 of this Agreement for such deferred maintenance items, Purchaser shall receive at Closing a credit in the amount set forth therein, in lieu of Seller undertaking to perform and warrant such repairs.
Sample 1

Related to Repair Requirements

  • Basic Requirements To be eligible for PayPal’s Seller Protection program, all of the following basic requirements must be met, as well as any applicable additional requirements: • The primary address for your PayPal account must be in the United States. • The item must be a physical, tangible good that can be shipped, except for items subject to the Intangible Goods Additional Requirements. Transactions involving items that you deliver in person in connection with payment made in your physical store, may also be eligible for PayPal’s Seller Protection program so long as the buyer paid for the transaction in person by using a PayPal goods and services QR code. • You must ship the item to the shipping address on the Transaction Details page in your PayPal account for the transaction. If you originally ship the item to the recipient’s shipping address on the Transaction Details page but the item is later redirected to a different address, you will not be eligible for PayPal’s Seller Protection program. We therefore recommend not using a shipping service that is arranged by the buyer, so that you will be able to provide valid proof of shipping and delivery. • The shipping requirement does not apply to eligible transactions involving items that you deliver in person; provided, however, that you agree to provide us with alternative evidence of delivery or such additional documentation or information relating to the transaction that we may request. • You must respond to PayPal’s requests for documentation and other information in a timely manner as requested in our email correspondence with you or in our correspondence with you through the Resolution Center. If you do not respond to PayPal’s request for documentation and other information in the time requested, you may not be eligible for PayPal’s Seller Protection program. • If the sale involves pre-ordered or made-to-order goods, you must ship within the timeframe you specified in the listing. Otherwise, it is recommended that you ship all items within 7 days after receipt of payment. • You provide us with valid proof of shipment or delivery. • The payment must be marked “eligible” or “partially eligible” in the case of Unauthorized Transaction claims, or “eligible” in the case of Item Not Received claims, for PayPal’s Seller Protection program on the Transaction Details page. • In the case of an Unauthorized Transaction claim, you must provide valid proof of shipment or proof of delivery that demonstrates that the item was shipped or provided to the buyer no later than two days after PayPal notified you of the dispute or reversal. For example, if PayPal notifies you of an Unauthorized Transaction claim on September 1, the valid proof of shipment must indicate that the item was shipped to the buyer no later than September 3 to be eligible for PayPal’s Seller Protection program. PayPal determines, in its sole discretion, whether your claim is eligible for PayPal’s Seller Protection program. PayPal will make a decision, in its sole discretion, based on the eligibility requirements, any information or documentation provided during the resolution process, or any other information PayPal deems relevant and appropriate under the circumstances. To be eligible for PayPal’s Seller Protection program for a buyer’s Item Not Received claim, you must meet both the basic requirements and the additional requirements listed below: • Where a buyer files a chargeback with the issuer for a card-funded transaction, the payment must be marked “eligible” for PayPal’s Seller Protection on the Transaction Details page. • You must provide proof of delivery as described below.

  • Contractor Requirements The Firm shall be construed, during the entire term of this contract, to be an independent contractor. Nothing in this contract is intended to nor shall be construed to create an employer- employee relationship, or a joint venture relationship. The Firm represents that it is qualified to perform the duties to be performed under this contract and that it has, or will secure, if needed, at its own expense, applicable personnel who are qualified to perform the duties required under this contract. Such personnel shall not be deemed in any way, directly or indirectly, expressly or by implication, to be employees of the District. Any person assigned by the firm to perform the services hereunder shall be the employee or a subcontractor of the Firm, who shall have the sole right to hire and discharge its employee or subcontractors. The Firm or its subcontractors shall pay, when due, all salaries and wages of their employees and accepts exclusive responsibility for the payment of federal income tax, social security, unemployment compensation and any other withholdings that may be required. Neither the Firm, its subcontractors nor their employees are entitled to state retirement or leave benefits. It is further understood that the consideration expressed herein constitutes full and complete compensation for all services and performance hereunder, and that any sum due and payable to the Firm shall be paid as a gross sum with no withholdings or deductions being made by the District for any purpose from said contract sum, except as permitted in paragraphs 16, 17 and 18.

  • Work Requirements The following Partner(s) is/are required to work for the Partnership: (choose one) ☐ - No Partners. No Partners are required to work for the Partnership. ☐ - Specific Partners. The following Partner(s) are required to work for the Partnership: [PARTNER(S')] NAME(S)]. Compensation, if any, shall be agreed to in a separate document.

  • Maintenance Requirements The Contractor shall ensure and procure that at all times during the Maintenance Period, the Project Highway conforms to the maintenance requirements set forth in Schedule-E (the “Maintenance Requirements”).

  • Customer Requirements Customer will be required to maintain complex passwords for their User accounts where applicable. For any such passwords LightEdge will provide a secure URL that any User can access to change passwords. All User passwords are set to a ninety (90) day password expiration schedule by default. LightEdge is not responsible for unexpected use of Services whether by ex-employees, compromised User passwords or any other misuse of Customer accounts. Customer shall be responsible for all costs incurred by such unexpected use of Service. Customer shall be fully responsible for providing to LightEdge at Customer’s own expense and in a timely manner the following: - All security for its Services and systems used or accessible in connection with Service; - Cooperative testing of all Customer-provided hardware, software, and Services for compatibility with Service; - Designating an Authorized Contact(s) to be the point of contact to interface with LightEdge Technical Support; - All cabling necessary to support Service; and - Physical and remote management access to any and all Servers onto which Service is installed.

  • Time Requirements The Independent Contractor will not be required to follow or establish a regular or daily work schedule, but shall devote during the term of this Agreement the time, energy and skill as necessary to perform the services of this engagement and shall, periodically or at any time upon the request of the Company, submit information as to the amount of time worked and scope of work performed.

  • System Requirements Apple Software is supported only on Apple-branded hardware that meets specified system requirements as indicated by Apple.

  • Subcontractor Requirements The Supplier must ensure that any subcontract entered into for the purpose of this Agreement contains an equivalent clause granting the rights specified in this clause.

  • Project Requirements 1. Project must conform to regulations under 24 CFR Part 92, commonly known as the HOME Regulations.

  • Specific Requirements compensation insurance with statutory limits required by South Dakota law. Coverage B-Employer’s Liability coverage of not less than $500,000 each accident, $500,000 disease-policy limit, and $500,000 disease-each employee.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!