Required Statements. In accordance with Charter § 1057-a, the Contractor hereby agrees as follows:
1. The Contractor shall advise all persons seeking voter registration forms and information, in writing together with other written materials provided by the Contractor or by appropriate publicity, that the Contractor’s or government services are not conditioned on being registered to vote.
2. No statement shall be made and no action shall be taken by the Contractor or an employee of the Contractor to discourage an applicant from registering to vote or to encourage or discourage an applicant from enrolling in any particular political party.
3. The Contractor shall communicate to applicants that the completion of voter registration forms is voluntary.
4. The Contractor and the Contractor’s employees shall not:
a. seek to influence an applicant’s political preference or party designation;
b. display any political preference or party allegiance;
c. make any statement to an applicant or take any action the purpose or effect of which is to discourage the applicant from registering to vote; or
d. make any statement to an applicant or take any action the purpose or effect of which is to lead the applicant to believe that a decision to register or not to register has any bearing on the availability of services or benefits.
Required Statements. The following statements must be included in all warehousing and distribution agree- ments:
(1) ‘‘This agreement shall not enter into force, and may not be amended or extended, without the prior written ap- proval of the Department of State of U.S. Government.’’
(2) ‘‘This agreement is subject to all United States laws and regulations re- lated to exports and to all administra- tive acts of the United States Govern- ment pursuant to such laws and regula- tions.
(3) ‘‘The parties to this agreement agree that the obligations contained in this agreement shall not affect the per- formance of any obligations created by prior contracts or subcontracts which the parties may have individually or collectively with the U.S. Govern- ment.’’
(4) ‘‘No liability will be incurred by or attributed to the U.S. Government in connection with any possible in- fringement of privately owned patent or proprietary rights, either domestic or foreign by reason of the U.S. Gov- ernment’s approval of this agreement.’’
(5) ‘‘No export, sale, transfer, or other disposition of the defense articles covered by this agreement is author- ized to any country outside the dis- tribution territory without the prior written approval of the Directorate of Defense Trade Controls of the U.S. De- partment of State.’’
(6) ‘‘The parties to this agreement agree that an annual report of sales or other transfers pursuant to this agree- ment of the licensed articles, by quan- tity, type, U.S. dollar value, and pur- chaser or recipient shall be provided by (applicant or licensee) to the Depart- ment of State.’’ This clause must speci- fy which party is obligated to provide the annual report. Such reports may be submitted either directly by the li- censee or indirectly through the licen- sor, and may cover calendar or fiscal years. Reports shall be deemed propri- etary information by the Department of State and will not be disclosed to unauthorized persons. (See § 126.10(b) of this subchapter.)
(7) (Licensee) agrees to incorporate the following statement as an integral provision of a contract, invoice or other appropriate document whenever the articles covered by this agreement are sold or otherwise transferred: These commodities are authorized for ex- port by the U.S. Government only to (coun- try of ultimate destination or approved sales territory). They may not be resold, diverted, transferred, transshipped, or otherwise be disposed of in any other country, either in their original form or after being in...
Required Statements. 2 Xxxx Qualifications and Experience 3 - 4 Partner, Supervisory, and Staff Qualifications and Experience. 5 - 9 Governmental Experience and Capacity............................................................................................ l0
Required Statements. 5.1 Only roofing products that comply with Metal Construction Association performance requirements will be labeled.
Required Statements. 5.1 Only roofing products that comply with Metal Construction Association performance requirements will be labeled. Prerequisites:
1. Substrate must have a relevant and current ASTM Standard established.
2. Manufacturer technical literature must be readily available. Test samples of new substrates intended to be painted must be evaluated in triplicates with a Standard Performance paint system as outlined in the MCA Metal Roofing Certification Program. All new substrates being evaluated must show painted performance compared to G90 HDG and AZ50 55%Al-Zn coated steel controls with same type of paint system. The control material must comply with Metal Construction Association Certified Standard Painted™ provisions. All test panels must include: • 3-T bend • 5/8 “ reverse impact • scribe to the metallic coating Exterior Coat
a.) Primer shall meet the coating manufacturer’s technical data sheet requirements.
b.) Topcoat shall be fully cured and of consistent color throughout the Project of uniform color consistent with the established color range. Limits for acceptable production color variations are to be established between the approval source and applicator.
1.) T-bend Test (ASTM D 4145): 3T, or better, no tape-off (ASTM D3359), and shall meet the coating manufacturer’s technical data sheet requirements.
2.) Reverse Impact (ASTM D 2794, 5/8” [16 mm] ball): 3000X metal thickness (expressed in inch- pounds ) for referenced steel materials in section 2.02 A of this specification, or 1500X metal thickness for aluminum; no tape-off (ASTM D3359), and shall meet the coating manufacturer’s technical data sheet requirements.
1. Salt Spray (ASTM B 117):, taped top edge and at least one vertical edge, leaving drip edge exposed; Record time to white rust and time to red rust. After 1000 hours evaluate creep at scribe (ASTM D1654) and cut edges. 8F maximum, blistering in the field of the test panel (rated per ASTM D 1654) Performance must be equal or better than the control material.
2. Humidity Resistance (ASTM D 2247 or D 1735): ( 1000 hours) evaluate for blistering, cracking, creepage, or corrosion. (rated per ASTM D1654) Performance must be equal or better than the control material.
3. Prohesion Test (ASTM G85 – Appendix -5)): Record number of cycles to white rust and to red rust. Performance must be equal or better than the control material.
Required Statements. In accordance with Charter § 1057-a, the Contractor hereby agrees as follows: The Contractor shall advise all persons seeking voter registration forms and information, in writing together with other written materials provided by the Contractor or by appropriate publicity, that the Contractor’s or government services are not conditioned on being registered to vote. No statement shall be made and no action shall be taken by the Contractor or an employee of the Contractor to discourage an applicant from registering to vote or to encourage or discourage an applicant from enrolling in any particular political party. The Contractor shall communicate to applicants that the completion of voter registration forms is voluntary. The Contractor and the Contractor’s employees shall not: seek to influence an applicant’s political preference or party designation; display any political preference or party allegiance; make any statement to an applicant or take any action the purpose or effect of which is to discourage the applicant from registering to vote; or make any statement to an applicant or take any action the purpose or effect of which is to lead the applicant to believe that a decision to register or not to register has any bearing on the availability of services or benefits. The Contractor, as defined above and in this Agreement, agrees that the covenants and representations in this Section 13.06 are material conditions of this Agreement. The provisions of this Section 13.06 do not apply where the services under this Agreement are supported by a federal or State grant of funds and the source of funds prohibits the use of federal or State funds for the purposes of this Section.
Required Statements. 86 Accompanying opinion of counsel and certificate of officers ................................................. 87 Basis of certificate or opinion ............................ 87
Required Statements. Applicable Statements Must Be Initialed and Dated.
1. IF TENANT IS RECEIVING RD RENTAL ASSISTANCE, COMPLETE THIS SECTION: Initials: Date: Tenant: Co-Tenant: Landlord: “I understand and agree that as long as I receive rental assistance, my gross monthly tenant contribution (as determined on the latest Form RD 3560-8 which must be attached to this Lease) for rent and utilities will be $ . If I pay any or all utilities directly (not including telephone or cable T.V.) a utility allowance of $ will be deducted from my gross monthly tenant contribution and my resulting net monthly contribution will be $ . If my net monthly tenant contribution is less than zero, the Landlord or owner will pay me $ .” “I also understand and agree that my monthly tenant contribution under this Lease may be raised or lowered based on changes in household income or adjustments to income, failure to submit information necessary to certify income, changes in the number and age of persons living in my household in the unit, and on the Escalation Clause in this Lease. Should I no longer receive rental assistance as a result of these changes, or the rental assistance agreement executed by the owner of the complex and Rural Development expires, I understand and agree that my monthly tenant contribution may be adjusted to no less than $ (“basic rent”), nor more than $ (“note rent”), during the remaining term of this Lease, except that based on the Escalation Clause in this Lease these rental rates may be changed by a Rural Development approved rent or occupancy charge change.” NOTE: Eligible borrowers with LH loans and grants, direct RRH loans, or insured RRH loans approved before August 1, 1968, may omit the words “no less than $ (“basic rent”) nor more than” from the last sentence of the above statement. “I understand that every effort will be made to provide rental assistance so long as I remain eligible and the rental assistance agreement between the owner and Rural Development remains in effect. However, should this assistance be terminated, I may arrange to terminate this Lease, giving proper notice as set forth elsewhere in this Lease. Xxxxxx’s tenant contribution to rent will not change if rental assistance is terminated due to action of Landlord or owner.”
2. IF TENANT DOES NOT RECEIVE RENTAL ASSISTANCE AND COMPLEX IS RECEIVING PLAN II INTEREST CREDIT, COMPLETE THIS SECTION. Initials: Date: Tenant: Co-Tenant: Landlord: “I understand and agree that my gross monthly tenant contributi...
Required Statements. Attached hereto is the First Amended and Restated Certificate of Formation of PowerHandz, Inc., which accurately states the text of the certificate of formation being restated and each amendment to the certificate of formation being restated that is in effect. The attached First Amended and Restated Certificate of Formation of PowerHandz, Inc. does not contain any other change in the certificate of formation being restated except for the information permitted to be omitted by the provisions of the TBOC applicable to the Corporation.
Required Statements. Gafcon acknowledges that all documents submitted pursuant to this request for proposal process will become a matter of public record. This proposal is a firm and irrevocable offer, good for 90 days. All forms, certificates, and compliance requirements identified in the RFP are completed and duly submitted within this proposal. We acknowledges the receipt of Addenda No. 1 dated February 18, 2021.
