ROLE OF FILM AND TELEVISION INSTITUTE OF INDIA. 1. FTII will design course syllabus and will also plan academic activities.
ROLE OF FILM AND TELEVISION INSTITUTE OF INDIA Sample Clauses
Related to ROLE OF FILM AND TELEVISION INSTITUTE OF INDIA
Role of the Central Parties and Crown a) The central parties shall each have the following rights:
Procedures and Applicable Law A demand for arbitration must be communicated in writing to all parties. Each party shall select an arbitrator (party arbitrator) within thirty days and a third arbitrator (neutral arbitrator) shall be selected by either party. Each party to the arbitration shall pay such party’s pro rata share of the expenses and fees of neutral arbitrator, together with other expenses of the arbitration incurred or approved by the neutral arbitrator, not including counsel fees or witness fees, or other expenses incurred by a party for such party’s own benefit. The parties agree that the arbitrators have the immunity of a judicial officer from civil liability when acting in the capacity of arbitrator under this contract. This immunity shall supplement, not supplant, any other applicable statutory or common law. Either party shall have the absolute right to arbitrate separately the issues of liability and damages upon written request to the neutral arbitrator. The parties’ consent to the intervention and joinder in this arbitration of any person or entity which could otherwise be a proper additional party in a court action, and upon such intervention and joinder any existing court action against such additional person or entity shall be stayed pending arbitration. The parties agree that provisions of California law applicable to health care providers shall apply to disputes within this arbitration agreement, including, but not limited to, Code of Civil Procedure Sections 340.5 and 667.7 and Civil Code Sections 3333.1 and 3333.2. Any party may bring before the arbitrators a motion for summary judgement or summary adjudication in accordance with the Code of Civil Procedure. Discovery shall be conducted pursuant to Code of Civil Procedure section 1283.05; however dispositions may be taken without prior approval of the neutral arbitrator.
REGISTRY OPERATOR CODE OF CONDUCT 1. In connection with the operation of the registry for the TLD, Registry Operator will not, and will not allow any parent, subsidiary, Affiliate, subcontractor or other related entity, to the extent such party is engaged in the provision of Registry Services with respect to the TLD (each, a “Registry Related Party”), to:
Dispute resolution and applicable law 1. The Parties shall first attempt to settle amicably any dispute arising out of this Agreement. Any dispute shall be resolved by arbitration, ousting jurisdiction by ordinary courts, by a panel of three arbitrators. Each party to the dispute will nominate one arbitrator. These two arbitrators will then designate a third arbitrator who will also act as chairman. The arbitration decision shall be binding on the parties. The arbitration rules of the CEPANI shall be applicable. The place of any hearing shall be Brussels and the language of the arbitration shall be English. Each Party may at any time request from any competent judicial authority any interim or conservatory measure.
Local Control Center, Metering and Telemetry The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.
AIN Selective Carrier Routing for Operator Services, Directory Assistance and Repair Centers 4.3.1 BellSouth will provide AIN Selective Carrier Routing at the request of <<customer_name>>. AIN Selective Carrier Routing will provide <<customer_name>> with the capability of routing operator calls, 0+ and 0- and 0+ NPA (LNPA) 555-1212 directory assistance, 1+411 directory assistance and 611 repair center calls to pre-selected destinations.
Cable Television, Telephone & Internet Services Long Distance calling may be done only through the use of a prepaid phone card or by charges made to a third party number if using a provided, in room telephone. Neither the Institution nor the Manager guarantees the availability of telephone service or cable television services. If the Resident wants additional cable television, telephone or internet service above and beyond any that may be provided as “standard” in the Residence, the Resident must submit full details to and request and obtain the prior written approval of the Manager and Institution. With respect to Internet Services, the Institution may at its discretion only allow either the standard provided service or the approved alternate service and not both at the same time (Residents will need to complete the Institution’s standard forms issued by their IT department). Cutting of wiring, boring of holes, the use of wireless routers, routers, or switches are not permitted. Any unauthorized services or equipment may be removed by the Manager, at the Resident’s expense, without notice or liability. All Residents are subject to the Institution’s and/or Service Provider’s current Internet, cable television and telephone enrolment and usage policies.
Millwright Xxxxx be to assist and work under the direction and instructions I or A. He will work alone at times performing assignments in keeping with his training. During the course of his year, training must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to and the process of learning techniques required in trouble shooting key production machinery, pipe fitting, basic welding and machining but not be expected to display a high degree of proficiency in these areas at this point. Millwright Must be capable of performing the tasks of fittings, aligning, lubricating an able to operate all shop tools and machines. Must under direction become proficient in basic welding and pipe fitting as well as dismantling and reassembly of plant equipment. Under direction,will continueto develop skills in trouble shooting all plant equipment and improve his skills at machining part and be exposed to basic principles of hydraulics and pneumatic. He may work alone frequently, but occasionally will require direction and instructions form Millwright I or A. Millwright 11: be capable, without direction of fitting, aligning and lubrication and taking apart and reassembling plant equipment. In addition, is expected to be able to weld, operate shop tools and do pipe fitting as required. Must under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechanical faults in plant machinery. I: Must be capable without direction of performing all practices under Xxxxxxxxxx Must under directionbecomeproficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Xxxxxxxxxx "A": Must he capable without direction, of performing all under Xxxxxxxxxx X, and Must take full responsibility for work done by himself or his assistant. Must he in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Millwrightspresently employed in this classification will not be required to have a Certificate.
WASHINGTON’S ELECTRONIC BUSINESS SOLUTION (WEBS). Contractor represents and warrants that it is registered in Washington’s Electronic Business Solution (WEBS), Washington’s contract registration system and that, all of its information therein is current and accurate and that throughout the term of this Master Contract, Contractor shall maintain an accurate profile in WEBS.
CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.
