Common use of SCOPE OF WORK COVERED BY THIS AGREEMENT Clause in Contracts

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, and all types of wall and/or ceiling coverings, panels or coatings whether decorative or protective and all preparations necessary before said application. (c) Work or services pertaining to the applications of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) Work or services pertaining to the applications of bond breaker, water repellant, damp proofing and/or waterproofing materials of all types. (e) Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) Work or services pertaining to “steeplejack work”. (j) Work or services pertaining to surface preparation and decoration of all types; including drywall repairs and incidental repair related skimming, abrasive blasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) Work or services pertaining to lead removal and encapsulation. (m) Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, abrasive blasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryersJapan Dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the The application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) . Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) . Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations necessary before said application. (c) . Work or services pertaining to the applications application of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) . Work or services pertaining to the applications of bond breaker, water repellant, damp proofing damproofing and/or waterproofing materials of all types. (e) . Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) job sites. Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) . Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) . Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) . Work or services pertaining to “steeplejack work”. (j) ” Work or services pertaining to surface preparation and decoration of all types; : including drywall repairs and incidental repair related skimming, abrasive blastingsandblasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) . Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) . Work or services pertaining to lead removal and encapsulation. (m) . Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on . On parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) . All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, abrasive blasters sandblasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts fork lifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employeremployer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations necessary before said application. (c) Work or services pertaining to the applications application of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) Work or services pertaining to the applications of bond breaker, water repellant, damp proofing and/or waterproofing materials of all types. (e) Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) Work or services pertaining to “steeplejack work”. (j) Work or services pertaining to surface preparation and decoration of all types; including drywall repairs and incidental repair related skimming, abrasive blasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) Work or services pertaining to lead removal and encapsulation. (m) Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, abrasive blasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations necessary before said application. (c) Work or services pertaining to the applications application of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) Work or services pertaining to the applications of bond breaker, water repellant, damp proofing and/or waterproofing materials of all types. (e) Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) Work or services pertaining to “steeplejack work”. (j) Work or services pertaining to surface preparation and decoration of all types; including drywall repairs and incidental repair related skimming, abrasive blastingsandblasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work., (k) Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) Work or services pertaining to lead removal and encapsulation. (m) Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, abrasive blasters sandblasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the The application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations necessary before said application. (c) Work or services pertaining to the applications application of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) Work or services pertaining to the applications of bond breaker, water repellant, damp proofing damproofing and/or waterproofing materials of all types. (e) Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) Work or services pertaining to “steeplejack work.”. (j) Work or services pertaining to surface preparation and decoration of all types; including Including drywall repairs and incidental repair related skimming, abrasive blastingsandblasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) Work or services pertaining to lead removal and encapsulation. (m) Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, abrasive blasters sandblasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methodsmeth- ods: paints, pigments, oils, turpentine, japan dryers, thinnersthin- ners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials mate- rials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated fab- ricated of any material or materials whatsoever and providedpro- vided; work or services pertaining to: the application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations prepa- rations necessary before said application. (c) Work or services pertaining to the applications application of protective pro- tective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanesure- thanes, etc., or any new products of this nature including the application to floor surfaces. (d) Work or services pertaining to the applications of bond breaker, water repellant, damp proofing and/or waterproofing wa- terproofing materials of all types. (e) Work or services pertaining to the finishing and surface sur- face preparation on all hardwood or softwood floors and furniture at jobsites. (f) Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) Work or services pertaining to the cleaning, polishing polish- ing and refinishing of metal and masonry surfaces. (i) Work or services pertaining to “steeplejack work”. (j) Work or services pertaining to surface preparation and decoration of all types; including drywall repairs and incidental repair related skimming, abrasive blastingblast- ing, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) Work or services pertaining to the application of hypolanhy- xxxxx, neoprene, and all similar products. (l) Work or services pertaining to lead removal and encapsulationen- capsulation. (m) Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint., (n) All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including includ- ing paperhangers, abrasive blasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or and/ or the Employer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations necessary before said application. (c) Work or services pertaining to the applications application of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) Work or services pertaining to the applications of bond breaker, water repellant, damp proofing and/or waterproofing materials of all types. (e) Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) Work or services pertaining to “steeplejack work”. (j) Work or services pertaining to surface preparation and decoration of all types; including drywall repairs and incidental repair related skimming, abrasive sandblastingabrasive blasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) Work or services pertaining to lead removal and encapsulation. (m) Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, sandblasters abrasive blasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employer.

SCOPE OF WORK COVERED BY THIS AGREEMENT. Section 1. The terms and conditions of this Agreement shall apply to all “covered work”. Covered work shall be and mean the following materials and application methods: paints, pigments, oils, turpentine, japan dryersJapan Dryers, thinners, varnishes, lacquers, shellac, stains, fillers, waxes, cement, joint cement, water and other vehicles; mediums that may be mixed and applied to the surfaces of materials and buildings, edifices, structures, monuments and the appurtenances thereto, of every type and description in their natural state of condition, or constructed or fabricated of any material or materials whatsoever and provided; work or services pertaining to: the The application of texture, acoustic, plaster and stucco materials of all types and thickness on all surfaces. (a) . Work or services pertaining to the painting, of all drywall and thin wall type surfaces, flushing or concrete surfaces, caulking and sealants between sheet rock walls and/or ceilings and floors of other materials. (b) . Work or services pertaining to the application of wallpapers, wall fabrics, wallcovering graphics, acoustical panels, decorative panels, fabrics and all types of wall and/or ceiling coverings, panels coverings or coatings whether decorative or protective and all preparations necessary before said application. (c) . Work or services pertaining to the applications application of protective coatings or products of similar nature whether they are plastic, vinyl, acrylics, epoxies, esters, urethanes, etc., or any new products of this nature including the application to floor surfaces. (d) . Work or services pertaining to the applications of bond breaker, water repellant, damp proofing damproofing and/or waterproofing materials of all types. (e) . Work or services pertaining to the finishing and surface preparation on all hardwood or softwood floors and furniture at jobsites. (f) job sites. Work or services pertaining to the priming and finish coats on fabricated metal or steel products. (g) . Work or services pertaining to the application of all fire retardant, fire proofing and/or insulation materials used on structural items or as architectural finishes. (h) . Work or services pertaining to the cleaning, polishing and refinishing of metal and masonry surfaces. (i) . Work or services pertaining to “steeplejack work”. (j) ” Work or services pertaining to surface preparation and decoration of all types; : including drywall repairs and incidental repair related skimming, abrasive blastingsandblasting, steam cleaning, building washing, hydro blasting, water blasting and all the methods used in the removal of previously painted surfaces; including caulking, tuck pointing, spackling and wood dough work. (k) . Work or services pertaining to the application of hypolan, neoprene, and all similar products. (l) . Work or services pertaining to lead removal and encapsulation. (m) . Work or services pertaining to painting of lines, arrows, bumpers, curbs, etc.; on . On parking lots, airfields, highways, game courts (both indoor and outdoor) and other such surfaces; installation and maintenance thereof, including lines of metal, plastic or composition materials used instead of paint. (n) . All products and methods of application which have or may be awarded to the Painters International through jurisdictional procedures. Section 2. The operation of all tools and equipment used by painting contractors and journeyman painters, including paperhangers, abrasive blasters sandblasters and all other facets as outlined in the utilizers as listed above, the above includes the control of all compressors, boom trucks, aerial lifts, forklifts fork lifts and other specialty equipment, it is the clear intent that all equipment and tools of the trade are under the custody and control of the contractor and/or the Employeremployer.