Secondary Bushings Sample Clauses

Secondary Bushings. The insulation class of the secondary bushing shall be higher than the winding insulation class to which it is connected as follows: For the 4160GrdY connection – 50 kV For the 600VGrdY and 208VGrdY connections - 45kV. The low voltage bushings, which shall be 4 to 8 hole NEMA spade as required, including a fully rated neutral bushing (XO) .shall be brought out through the transformer tank wall. The low voltage bushings shall be housed in an air insulated weather-proof junction box while, the neutral bushing shall be located outside the box (i.e. exposed). Low voltage terminals shall be arranged left to right for X1 to X3 with XO to the left of Xl, as seen when facing the low voltage side of the transformer.
AutoNDA by SimpleDocs

Related to Secondary Bushings

  • Furnishings Landlord shall have the right to prescribe the weight and position of safes and other heavy equipment and fixtures, which, if considered necessary by Landlord, shall be installed in such manner as Landlord directs in order to distribute their weight adequately. In no event shall Tenant place on any part of the floor of the Premises a load exceeding the floor load per square foot which such floor was designed to carry and which is allowed by law. Any and all damage or injury to the Premises or the Building caused by moving such heavy equipment or fixtures or the same being in or upon the Premises, shall be repaired by and at the sole cost of Tenant. All furniture, equipment, and other bulky matter of any description shall be delivered to the Premises only through the designated service entrance of the Building and the designated service elevator during normal business hours or as otherwise directed or scheduled by Landlord. All moving of furniture, equipment, and other materials shall be under the supervision of Landlord, who shall not, however, be responsible for any damage to or charges for moving the same. Tenant agrees to remove promptly from the sidewalks adjacent to the Building any of Tenant's furniture, equipment, or other material there delivered or deposited.

  • Furniture, Fixtures and Equipment Sublessee shall have the right to use during the Term the office furnishings and equipment within the Subleased Premises that are identified on Exhibit C attached hereto, as such exhibit may be adjusted by mutual agreement of the parties prior to the Third Floor Premises Delivery Date (the “Furniture”), provided Sublessee may only use the Furniture located in the Second Floor Premises after the Second Floor Commencement Date. The Furniture is provided in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever. Sublessee shall insure the Furniture under the property insurance policy required under the Master Lease, as incorporated herein, and pay all taxes with respect to the Furniture. Sublessee shall maintain the Furniture in good condition and repair, reasonable wear and tear excepted, and shall be responsible for any loss or damage to the same occurring during the Term. Sublessee shall surrender the Furniture to Sublessor upon the termination of this Sublease in the same condition as exists as of the applicable Delivery Date, reasonable wear and tear excepted. Sublessee shall not remove any of the Furniture from the Subleased Premises. Notwithstanding anything to the contrary herein, Sublessee may provide Sublessor with written notice one (1) time not less than forty-five (45) days prior to the Third Floor Premises Delivery Date that lists any items of Furniture that Sublessee does not want to use and Sublessor shall, at no cost to Sublessee, remove such items from the Subleased Premises prior to the Third Floor Premises Delivery Date and such items shall no longer be considered Furniture hereunder. Notwithstanding the foregoing, provided Sublessee is not in default beyond the expiration of any applicable cure or grace period as of the date of the expiration or earlier termination of this Sublease, which condition may be waived by Sublessor in its sole discretion, then upon the expiration or earlier termination of this Sublease, the Furniture shall become the property of Sublessee, and Sublessee shall accept the same in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever except as provided in the Bill of Sale referred to in the following sentence. In the event the Furniture is to become the property of Sublessee upon the expiration or earlier termination of this Sublease pursuant to the terms of the immediately preceding sentence, then Sublessor agrees to execute and deliver to Sublessee a Bill of Sale in the form of Exhibit D attached hereto conveying and transferring to Sublessee the Furniture.

  • Furniture For no additional charge, Landlord hereby leases to Tenant and Tenant hereby leases from Landlord those items of furniture and artwork situated in the Premises (the “FURNITURE”) and described on the inventory list attached hereto as EXHIBIT C (the “INVENTORY LIST”). Landlord hereby represents to Tenant that Landlord owns the Furniture and has the right to lease the Furniture to Tenant as described herein. Landlord and Tenant acknowledge that prior to the Lease Commencement Date the parties will conduct a “walk-through” inspection of the Premises in order to confirm the completeness and accuracy of the furniture shown on the Inventory List, and to give Tenant the opportunity to confirm that the Furniture is in good condition and repair. Subject to such “walk-through” inspection, Tenant accepts the Furniture in its “as-is” condition, without any representation or warranty by Landlord. LANDLORD SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS AND/OR WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE FURNITURE. During the Term of this Lease, Tenant shall maintain and repair the Furniture as reasonably necessary, and shall insure the same along with its other personal property pursuant to ARTICLE 10 hereof. Upon the expiration or earlier termination of this Lease, Tenant shall surrender the Furniture to Landlord in the same condition and repair as on the Lease Commencement Date, reasonable wear and tear and damage by casualty excepted.

  • Capital Equipment Collaborator’s commitment, if any, to provide ICD with capital equipment to enable the research and development activities under the Research Plan appears in Appendix B. If Collaborator transfers to ICD the capital equipment or provides funds for ICD to purchase it, then ICD will own the equipment. If Collaborator loans capital equipment to ICD for use during the CRADA, Collaborator will be responsible for paying all costs and fees associated with the transport, installation, maintenance, repair, removal, or disposal of the equipment, and ICD will not be liable for any damage to the equipment.

  • Fixtures and Equipment Each of the Company and its Subsidiaries (as applicable) has good title to, or a valid leasehold interest in, the tangible personal property, equipment, improvements, fixtures, and other personal property and appurtenances that are used by the Company or its Subsidiary in connection with the conduct of its business (the “Fixtures and Equipment”). The Fixtures and Equipment are structurally sound, are in good operating condition and repair, are adequate for the uses to which they are being put, are not in need of maintenance or repairs except for ordinary, routine maintenance and repairs and are sufficient for the conduct of the Company’s and/or its Subsidiaries’ businesses (as applicable) in the manner as conducted prior to the Closing. Each of the Company and its Subsidiaries owns all of its Fixtures and Equipment free and clear of all Liens except for (a) liens for current taxes not yet due and (b) zoning laws and other land use restrictions that do not impair the present or anticipated use of the property subject thereto.

  • Plant An electrical generating alternative energy resource facility developed by Producer for which IID shall provide transmission service, as specified in Exhibit(s) II, Transmission Service, and in any subsequent Plant Amendments.

  • Tooling Inventory that consists of tooling or replacement parts;

  • Business Locations Set forth on Schedule 6.20(a) is a list of all Real Properties located in the United States that are owned or leased by the Loan Parties as of the Closing Date. Set forth on Schedule 6.20(b) is a list of all locations where any tangible personal property of a Loan Party is located as of the Closing Date. Set forth on Schedule 6.20(c) is the chief executive office, jurisdiction of incorporation or formation and principal place of business of each Loan Party as of the Closing Date.

  • Spares Boeing will revise, as applicable, the customized Recommended Spares Parts List (RSPL) and Illustrated Parts Catalog (IPC).

  • Collateral Locations All of such Grantor’s locations where Collateral is located are listed on Exhibit A. All of said locations are owned by such Grantor except for locations (i) which are leased by the Grantor as lessee and designated in Part VII(b) of Exhibit A and (ii) at which Inventory is held in a public warehouse or is otherwise held by a bailee or on consignment as designated in Part VII(c) of Exhibit A.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!