Scope and Order Placement These terms may be used by Customer either for a single Order or as a framework for multiple Orders. In addition, these terms may be used on a global basis by the parties’ “Affiliates”, meaning any entity controlled by, controlling, or under common control with a party. The parties can confirm their agreement to these terms either by signature where indicated at the end or by referencing these terms on Orders. Affiliates participate under these terms by placing orders which specify product or service delivery in the same country as the HP Affiliate accepting the Order, referencing these terms, and specifying any additional terms or amendments to reflect local law or business practices.
Order Placement To place orders for the Trustee to create or redeem one or more Baskets, Authorized Participants must follow the procedures for creation and redemption referred to in Section 3 of this Agreement and the procedures described in Attachment A hereto (the “Procedures”), as each may be amended, modified or supplemented from time to time.
Funding Restrictions and Order Quantities The Agency reserves the right to reduce or increase estimated or actual quantities in whatever amount necessary without prejudice or liability to the Agency, if:
12.3.1 Funding is not available;
12.3.2 Legal restrictions are placed upon the expenditure of monies for this category of service or supplies; or,
12.3.3 The Agency’s requirements in good faith change after award of the contract.
Placement of DNS probes Probes for measuring DNS parameters shall be placed as near as possible to the DNS resolvers on the networks with the most users across the different geographic regions; care shall be taken not to deploy probes behind high propagation-‐delay links, such as satellite links.
Order Coordination and Order Coordination-Time Specific 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below.
2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.
Private Placement Procedures If Counterparty is unable to comply with the provisions of sub-paragraph (ii) of “Agreements and Acknowledgments Regarding Shares” above because of a change in law or a change in the policy of the Securities and Exchange Commission or its staff, or Dealer otherwise determines that in its reasonable opinion any Shares to be delivered to Dealer by Counterparty may not be freely returned by Dealer or its affiliates to securities lenders as described under such sub-paragraph (ii) or otherwise constitute “restricted securities” as defined in Rule 144 under the Securities Act, then delivery of any such Shares (the “Restricted Shares”) shall be effected as provided below, unless waived by Dealer.
(i) If Counterparty delivers the Restricted Shares pursuant to this clause (i) (a “Private Placement Settlement”), then delivery of Restricted Shares by Counterparty shall be effected in accordance with private placement procedures customary for private placements of equity securities of substantially similar size with respect to such Restricted Shares reasonably acceptable to Dealer; provided that Counterparty may not elect a Private Placement Settlement if, on the date of its election, it has taken, or caused to be taken, any action that would make unavailable either the exemption pursuant to Section 4(a)(2) of the Securities Act for the sale by Counterparty to Dealer (or any affiliate designated by Dealer) of the Restricted Shares or the exemption pursuant to Section 4(a)(1) or Section 4(a)(3) of the Securities Act for resales of the Restricted Shares by Dealer (or any such affiliate of Dealer), and if Counterparty fails to deliver the Restricted Shares when due or otherwise fails to perform obligations within its control in respect of a Private Placement Settlement, it shall be an Event of Default with respect to Counterparty and Section 6 of the Agreement shall apply. The Private Placement Settlement of such Restricted Shares shall include customary representations, covenants, blue sky and other governmental filings and/or registrations, indemnities to Dealer, due diligence rights (for Dealer or any designated buyer of the Restricted Shares by Dealer), opinions and certificates, and such other documentation as is customary for private placement agreements of equity securities of a substantially similar size, all reasonably acceptable to Dealer. In the case of a Private Placement Settlement, Dealer shall, in its good faith discretion, adjust the amount of Restricted Shares to be delivered to Dealer hereunder in a commercially reasonable manner to reflect the fact that such Restricted Shares may not be freely returned to securities lenders by Dealer and may only be saleable by Dealer at a discount to reflect the lack of liquidity in Restricted Shares. Notwithstanding the Agreement or this Confirmation, the date of delivery of such Restricted Shares shall be the Clearance System Business Day following notice by Dealer to Counterparty of the number of Restricted Shares to be delivered pursuant to this clause (i). For the avoidance of doubt, delivery of Restricted Shares shall be due as set forth in the previous sentence and not be due on the date that would otherwise be applicable.
(ii) If Counterparty delivers any Restricted Shares in respect of this Transaction, Counterparty agrees that (A) such Shares may be transferred by and among Dealer and its affiliates and (B) after the minimum “holding period” within the meaning of Rule 144(d) under the Securities Act has elapsed, Counterparty shall promptly remove, or cause the transfer agent for the Shares to remove, any legends referring to any transfer restrictions from such Shares upon delivery by Dealer (or such affiliate of Dealer) to Counterparty or such transfer agent of any seller’s and broker’s representation letters customarily delivered by Dealer or its affiliates in connection with resales of restricted securities pursuant to Rule 144 under the Securities Act, each without any further requirement for the delivery of any certificate, consent, agreement, opinion of counsel, notice or any other document, any transfer tax stamps or payment of any other amount or any other action by Dealer (or such affiliate of Dealer).
Contract Closure Contracting Officer shall give appropriate written notice to Purchaser when Purchaser has complied with the terms of this contract. Purchaser shall be paid refunds due from Timber Sale Account un- der B4.24 and excess cooperative deposits under B4.218.
Forecasts and Orders 2.2.1 On the Effective Date of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the remainder of the current calendar year (the “Initial Annual Forecast”). Not later than November 30 of each calendar year during the Term of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the next subsequent calendar year (each, an “Annual Forecast”). The Annual Forecast shall be used to establish the per unit and per kilogram pricing for the Martek Products purchased during the relevant calendar year in accordance with Section 2.3.1 and Exhibit A attached hereto; provided that, for the remainder of calendar year 2006, the per kilogram pricing to be used, subject to the year-end adjustment pursuant to Section 2.3.1, shall be * per kilogram, notwithstanding the Initial Annual Forecast. In addition to the foregoing, one (1) month before the commencement of each calendar quarter during the Term of this Agreement, PURCHASER shall provide SELLER with a forecast (a “Rolling Forecast”) of PURCHASER’s requirements for the Martek Product for each of the succeeding four (4) quarters, specifying quantities and requested delivery dates. These forecasts will be PURCHASER’s good-faith, best estimate of requirements and should not be considered a firm commitment.
2.2.2 PURCHASER expressly acknowledges that available supplies of the Martek Product have been in the past, and, may from time to time in the future, be insufficient to meet current demand. Nevertheless, SELLER shall use commercially reasonable efforts to have available for shipment to PURCHASER or to a Designee for PURCHASER’s account such quantities of the Martek Product as PURCHASER forecasts in good faith pursuant to Section 2.2.1 above and any additional quantities which PURCHASER may reasonably request. In case for any reason SELLER cannot or does not supply such quantities of the Martek Products as are forecasted in good faith by PURCHASER pursuant to Section 2.2.1 to PURCHASER, PURCHASER shall be allowed to use an alternative supplier for quantities of Omega-3 and Omega-6 long-chain polyunsaturated fatty acids equal to those quantities of Martek Products that were ordered by PURCHASER pursuant to a Purchase Order and not delivered by SELLER.
2.2.3 PURCHASER shall issue and/or shall direct the Designee(s) to issue formal purchase orders (“Purchase Orders”) at least sixty (60) but no more than ninety (90) days in advance of the date on which PURCHASER or the Designee requests that SELLER ship the Martek Product. SELLER shall accept or reject any such Purchase Order within five (5) business days of receipt, provided that SELLER shall not reject any Purchase Order for any quantities within the most recent forecast.
2.2.4 Purchase Orders which have been accepted by SELLER shall be considered as firm and binding orders (subject to the provisions of Section 2.2.2 above) and shall only be canceled or amended by mutual written agreement of the parties. * CONFIDENTIAL TREATMENT REQUESTED. CONFIDENTIAL PORTION HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION.
TIMELY PRICING AND ORDERS (a) AVIF or its designated agent will use its best efforts to provide LIFE COMPANY with the net asset value per Share for each Fund by 6:00 p.
Trunk Group Connections and Ordering 5.2.1 For both One-Way and Two-Way Interconnection Trunks, if Onvoy wishes to use a technically feasible interface other than a DS1 or a DS3 facility at the POI, the Parties shall negotiate reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures.
5.2.2 When One-Way or Two-Way Interconnection Trunks are provisioned using a DS3 interface facility, if Onvoy orders the multiplexed DS3 facilities to a Frontier Central Office that is not designated in the NECA 4 Tariff as the appropriate Intermediate Hub location (i.e., the Intermediate Hub location in the appropriate Tandem subtending area based on the LERG), and the provision of such facilities to the subject Central Office is technically feasible, the Parties shall negotiate in good faith reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures.
5.2.3 Each Party will identify its Carrier Identification Code, a three or four digit numeric code obtained from Telcordia, to the other Party when ordering a trunk group.
5.2.4 For multi-frequency (MF) signaling each Party will out pulse ten (10) digits to the other Party, unless the Parties mutually agree otherwise.
5.2.5 Each Party will use commercially reasonable efforts to monitor trunk groups under its control and to augment those groups using generally accepted trunk- engineering standards so as to not exceed blocking objectives. Each Party agrees to use modular trunk-engineering techniques for trunks subject to this Attachment.
