Shipment and Acceptance of Hardware Products
Shipment and Acceptance of Hardware Products Sample Clauses
Related to Shipment and Acceptance of Hardware Products
Delivery and Acceptance of the Manuscript The Author shall deliver the Contribution to the Editor (or, if requested by the Publisher, to the Publisher) on or before Delivery Date (the “Delivery Date”) electronically in the Publisher's standard requested format or in such other form as may be agreed in writing with the Publisher. The Author shall retain a duplicate copy of the Contribution. The Contribution shall be in a form acceptable to the Publisher (acting reasonably) and in line with the instructions contained in the Publisher’s guidelines as provided to the Author by the Publisher. The Author shall provide at the same time, or earlier if the Publisher reasonably requests, any editorial, publicity or other information (and in such form or format) reasonably required by the Publisher. The Publisher may exercise such additional quality control of the manuscript as it may decide at its sole discretion including through the use of plagiarism checking systems and/or peer review by internal or external reviewers of its choice. If the Publisher decides at its sole discretion that the final manuscript does not conform in quality, content, structure, level or form to the stated requirements of the Publisher, the Publisher shall be entitled to terminate this Agreement in accordance with the provisions of this Clause. The Author must inform the Publisher at the latest on the Delivery Date if the sequence of the naming of any co-authors entering into this Agreement shall be changed. If there are any changes in the authorship (e.g. a co-author joining or leaving), then the Publisher must be notified by the Author in writing immediately and the Parties will amend this Agreement accordingly. The Publisher shall have no obligation to consider publication under this Agreement in the absence of such agreed amendment. If the Author fails to deliver the Contribution in accordance with the provisions of this Clause above by the Delivery Date (or within any extension period given by the Publisher at its sole discretion) or if the Author (or any co-author) dies or becomes incapacitated or otherwise incapable of performing the Author’s obligations under this Agreement, the Publisher shall be entitled to either: (a) elect to continue to perform this Agreement in accordance with its terms and the Publisher may commission an appropriate and competent person (who, in the case of co-authors having entered into this Agreement, may be a co-author) to complete the Contribution; or (b) terminate this Agreement with immediate effect by written notice to the Author or the Author's successors, in which case all rights granted by the Author to the Publisher under this Agreement shall revert to the Author/Author's successors (subject to the provisions of the Clause "Termination"). The Author agrees, at the request of the Publisher, to execute all documents and do all things reasonably required by the Publisher in order to confer to the Publisher all rights intended to be granted under this Agreement. The Author warrants that the Contribution is original except for any excerpts from other works including pre-published illustrations, tables, animations, text quotations, photographs, diagrams, graphs or maps, and whether reproduced from print or electronic or other sources ("Third Party Material") and that any such Third Party Material is in the public domain (or otherwise unprotected by copyright/other rights) or has been included with written permission from or on behalf of the rights holder (and if requested in a form prescribed or approved by the Publisher) at the Author's expense unless otherwise agreed in writing, or is otherwise used in accordance with applicable law. On request from the Publisher, the Author shall in writing indicate the precise sources of these excerpts and their location in the manuscript. The Author shall also retain the written permissions and make them available to the Publisher on request.
Testing and Acceptance Within […***…] after RFM’s delivery of the IC Design File to ST, ST shall manufacture and deliver a commercially reasonable quantity of evaluation Product to RFM for evaluation testing. Upon RFM’s receipt of such Products from ST, RFM shall test such Products with the applicable Evaluation Software and in the applicable Evaluation Circuit Design to determine if the IC Design for such Products conforms to the applicable Specifications. Upon completion of such testing, RFM shall provide ST with the data from such testing (“Evaluation Data”). Upon ST’s receipt of the Evaluation Data, ST shall evaluate whether the Evaluation Data indicates that the IC Design conforms to the Specifications in all material respects. ST shall accept or reject the IC Design based on the Evaluation Data and shall give RFM written notice thereof within seven (7) calendar days after RFM’s delivery of the Evaluation Data to ST. An IC Design will be deemed accepted by ST if RFM has not received notification of rejection of such IC Design from ST within seven (7) calendar days after RFM’s delivery of the applicable Evaluation Data to ST. ST’s refusal to accept the IC Design must be reasonable, must be in writing and must be accompanied by a reasonably detailed description of the manner in which the IC Design fails to comply with the Specifications in all material respects (collectively, the “Deficiencies”) so that RFM can have the opportunity to correct the Deficiencies. If ST properly rejects the IC Design, RFM shall use commercially reasonable efforts to correct any Deficiencies and redeliver a corrected IC Design File within […***…] after RFM’s receipt of the rejection notice and the foregoing provisions set forth in this Section 3.3 shall be reapplied until the IC Design is accepted; provided, however, that upon the […***…] or any subsequent rejection, either party may terminate this Agreement upon thirty (30) calendar days prior written notice to the other party, unless the IC Design is accepted during such notice period.
INSPECTION AND ACCEPTANCE Cisco may reject any or all of the Work which does not conform to the applicable requirements within 10 business days of Supplier’s delivery of the Work. At Cisco’s option, Cisco may (i) return the non- conforming Work to Supplier for a refund or credit; (ii) requires Supplier to replace the non-conforming Work; or (iii) repair the non-conforming Work so that it meets the requirements. As an alternative to (i) through (iii), Cisco may accept the non-conforming Work conditioned on Supplier providing a refund or credit in an amount Cisco reasonably determines to represent the diminished value of the non-conforming Work. Cisco’s payment to Supplier for Work prior to Xxxxx’s timely rejection of such Work as non- conforming will not be deemed as acceptance by Xxxxx.
Acceptance of Products All drawings, specifications, technical documentation, samples, prototypes and Products are approved and/or accepted by Buyer if Buyer does not provide Seller a written objection and/or rejection within 10 days of receipt or other reasonable time established in writing by Seller. Failure to provide written objection and/or rejection will constitute an irrevocable acceptance by the Buyer of the Products. Any written objection and/or rejection must state with specificity all defects and non-conformities upon which Buyer will rely to support its rejection of the Products. ALL DEFECTS AND NON- CONFORMITIES WHICH ARE NOT SPECIFIED ARE WAIVED BY BUYER. If Xxxxx rejects the Products and, if requested by Seller, Xxxxx will return them to Seller at Buyer’s cost, within three days, or Buyer has irrevocably accepted the Products. No attempted revocation of acceptance will be effective, and Buyer will be limited to any available remedies specifically provided in the Terms for breach of warranty. Seller has a reasonable period of time to cure any non- conformity.
Delivery and Acceptance All Software provided hereunder will be delivered electronically. We provide trial licenses of the Software for testing and pre-acceptance before purchase and therefore, delivery is deemed complete and accepted when such Software is made available to you. You are responsible for downloading, installing, registering, or otherwise using the Software.
Required Acceptance of Daily Load Deliveries and Notification If the State is harmed by purchaser’s refusal to accept up to 10 truck deliveries of any one sort per day, Purchaser will be in breach of contract and subject to damages as per the D-026.2 and D-027.2 clauses. A truck delivery is all the wood delivered including sorts on super trucks, mule trains and pups brought to the delivery point by a single truck. The Purchaser shall notify the Contract Administrator at least 48 hours in advance if: 1. Purchaser intends to limit the number of truck deliveries accepted on any day to less than that listed above, or 2. Purchaser intends to limit the number of truck deliveries accepted on any day to the number listed above.
PRODUCT ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor in the Authorized User Agreement, Authorized User(s) shall have sixty (60) days from the date of delivery to accept all Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Title or other property interest and risk of loss shall not pass from Contractor to the Authorized User until the Products have been accepted. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty
Acceptance of Work The completion of the Work shall be subject to acceptance by NYSERDA in writing of all deliverables as defined in Exhibit A, Statement of Work.
ACKNOWLEDGEMENT AND ACCEPTANCE (a) In accepting the RSUs, the Participant acknowledges and agrees: (i) that the Plan is discretionary in nature and may be amended, cancelled, suspended or terminated by the Company at any time; (ii) that the grant of the RSUs does not create any contractual or other right to receive future grants of RSUs or any right to continue an employment or other relationship with the Company (for the vesting period or otherwise); (iii) that the Participant remains subject to discharge from such relationship to the same extent as if the RSUs had not been granted; (iv) that all determinations with respect to any such future grants, including, but not limited to, when and on what terms they shall be made, will be at the sole discretion of the Committee; (v) that participation in the Plan is voluntary; (vi) that the value of the RSUs is an extraordinary item of compensation that is outside the scope of the Participant’s employment contract if any; and (vii) that the grant of RSUs is not part of normal or expected compensation for purposes of calculating any severance, resignation, redundancy, end of service payments, bonuses, long-service awards, pension or retirement benefits or similar benefits. (b) If the Participant does not want to accept the RSUs on the terms and conditions set out in this Agreement, the Plan and/or any related documents, the Participant may choose the “Decline” button. The RSUs will then be cancelled and no other benefit will be due to the Participant in lieu thereof. If Participant does not “Decline” the RSUs within thirty (30) days from the Grant Date, the Participant shall be deemed to have accepted the RSUs and shall be deemed to have agreed to the terms and conditions set out in this Agreement, the Plan and/or any related documents. (c) The grant of the RSUs is not intended to be a public offering of securities in the Participant’s country of residence (and country of employment, if different). The Company has not submitted any registration statement, prospectus or other filings with the local securities authorities (unless otherwise required under local law), and the grant of the RSUs is not subject to the supervision of the local securities authorities. No employee of the Company or any of the Company’s subsidiaries is permitted to advise the Participant on whether the Participant should acquire Shares as a result of settlement of the RSUs under the Plan. Investment in Shares involves a degree of risk. Before deciding to acquire Shares as a result of settlement of the RSUs, the Participant should carefully consider all risk factors relevant to the acquisition of Shares under the Plan and the Participant should carefully review all of the materials related to the RSUs and the Plan. In addition, the Participant should consult with the Participant’s personal advisor for professional investment advice. (d) The Participant acknowledges and agrees that it is the Participant’s express intent that this Agreement, the Addendum (if applicable) and the Plan and all other documents, notices and legal proceedings entered into, given or instituted pursuant to the award, be drawn up in English. If the Participant has received this Agreement, the Addendum and the Plan or any other documents related to the award translated into a language other than English, and if the meaning of the translated version is different than the English version, the English version shall control. (e) As a condition to the grant of the RSUs, the Participant agrees to repatriate all payments attributable to the Shares and/or cash acquired under the Plan in accordance with local foreign exchange rules and regulations in the Participant’s country of residence (and country of employment, if different). In addition, the Participant also agrees to take any and all actions, and consents to any and all actions taken by the Company and its affiliates and subsidiaries and/or the Employer, as may be required to allow the Company and its affiliates and subsidiaries or the Employer to comply with local laws, rules and regulations in the Participant’s country of residence (and country of employment, if different). Finally, the Participant agrees to take any and all actions as may be required to comply with the Participant’s personal obligations under local laws, rules and regulations in the Participant’s country of residence (and country of employment, if different).
