Shareholder Internet Services The Transfer Agent shall provide internet access to the Fund’s shareholders through a designated web site (“Shareholder Internet Services”), which will be accessed by the Fund’s shareholders via a link on the Fund’s web site. The Shareholder Internet Services will be provided pursuant to established procedures and will allow shareholders to view their account information and perform certain on-line transaction request capabilities. The Shareholder Internet Services shall be provided at no additional charge, other than the transaction fees currently being charged for the different transactions as described on the Fee Schedule. The Transfer Agent reserves the right to charge a fee for this service in the future.
Shareholder Transactions (i) Process shareholder purchase and redemption orders in accordance with conditions set forth in the Trust's prospectus.
(ii) Set up account information, including address, dividend option, taxpayer identification numbers and wire instructions.
(iii) Issue confirmations in compliance with Rule 10b-10 under the Securities Exchange Act of 1934, as amended (the "1934 Act").
(iv) Issue periodic statements for shareholders.
(v) Process transfers and exchanges.
(vi) Act as a service agent and process dividend payments, including the purchase of new shares, through dividend reimbursement.
(vii) Record the issuance of shares and maintain pursuant to Rule 17Ad-10(e) of the 1934 Act a record of the total number of shares of each Portfolio which are authorized, based upon data provided to it by the Trust, and issued and outstanding.
(viii) Perform such services as are required to comply with Rules 17a-24 and 17Ad-17 of the 1934 Act (the "Lost Shareholder Rules").
(ix) Administer and/or perform all other customary services of a transfer agent.
Freedom to Trade in Company Securities The Rights Agent and any stockholder, director, officer or employee of the Rights Agent may buy, sell or deal in any of the Rights or other securities of the Company or become pecuniarily interested in any transaction in which the Company may be interested, or contract with or lend money to the Company or otherwise act as fully and freely as though it were not Rights Agent under this Agreement. Nothing herein shall preclude the Rights Agent from acting in any other capacity for the Company or for any other legal entity.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Non-Company Business Except with the prior written consent of the Board, Executive will not during the term of Executive’s employment with the Company undertake or engage in any other employment, occupation or business enterprise, other than ones in which Executive is a passive investor. Executive may engage in civic and not-for-profit activities so long as such activities do not materially interfere with the performance of Executive’s duties hereunder.
Purchased Services During the term of this Collective Agreement, no regular employee will be declared surplus in his/her position as a result of the use of purchased services to perform the work normally performed by that employee.
Minority Business Enterprise The Recipient shall comply with the minority business requirements pursuant to Section 164.07(A) of the Revised Code and rule 164-1-32 of the Administrative Code when making direct purchases of equipment, materials or supplies.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Shareholder Information Services (i) Make information available to shareholder servicing unit and other remote access units regarding trade date, share price, current holdings, yields, and dividend information.
(ii) Produce detailed history of transactions through duplicate or special order statements upon request.
(iii) Provide mailing labels for distribution of financial reports, prospectuses, proxy statements or marketing material to current shareholders.
(iv) Respond as appropriate to all inquiries and communications from shareholders relating to shareholder accounts.
Minority and Women’s Business Enterprises Compliance Award of this Contract was based, in part, on the Minority and/or Women’s Business Enterprise (“MBE” and/or “WBE”) participation plan as detailed in the Minority and Women’s Business Enterprises Subcontractor Commitment Form, commonly referred to as “Attachment A” in the procurement documentation and incorporated by reference herein. Therefore, any changes to this information during the Contract term must be approved by MWBE Compliance and may require an amendment. It is the State’s expectation that the Contractor will meet the subcontractor commitments during the Contract term. The following MBE/WBE Division (“Division”) certified MBE and/or WBE subcontractors will be participating in this Contract: [Add additional MBEs and WBEs using the same format.] MBE or WBE COMPANY NAME PHONE EMAIL OF CONTACT PERSON PERCENT A copy of each subcontractor agreement must be submitted to the Division within thirty (30) days of the effective date of this Contract. The subcontractor agreements may be uploaded into Pay Audit (Indiana’s subcontractor payment auditing system), emailed to XXXXXxxxxxxxxx@xxxx.XX.xxx, or mailed to MWBE Compliance, 000 X. Xxxxxxxxxx Street, Indianapolis IN 46204. Failure to provide a copy of any subcontractor agreement may be deemed a violation of the rules governing MBE/WBE procurement and may result in sanctions allowable under 25 IAC 5-7-8. Requests for changes must be submitted to XXXXXxxxxxxxxx@xxxx.XX.xxx for review and approval before changing the participation plan submitted in connection with this Contract. The Contractor shall report payments made to Division certified subcontractors under this Contract on a monthly basis using Pay Audit. The Contractor shall notify subcontractors that they must confirm payments received from the Contractor in Pay Audit. The Pay Audit system can be accessed on the IDOA webpage at: xxx.xx.xxx/xxxx/xxxx/xxxxxxxx.xxx. The Contractor may also be required to report Division certified subcontractor payments directly to the Division, as reasonably requested and in the format required by the Division. The Contractor’s failure to comply with the provisions in this clause may be considered a material breach of the Contract.
